Question about 1992 Toyota Celica

1 Answer

Soft clutch pedal

I have a 96 Dodge ram 1500 5 speed runs and drives fine just having problem with soft clutch pedal while driving so not sure what to do or how to fix the problem if anyone has any ideas on what I can do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 12,223 Answers

See the diagram attached. God bless you
However you can go to www.automecanico.com and translate this website with your browser and fix it.
Soft clutch pedal - 9ed66222-4257-4799-ac7e-24aaee63efca.gif

Posted on Jul 23, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: clutch pedal

bleed the clutch some time ther is air in the master an slave cylinder or the clutch pedal needs adjustment

Posted on Aug 18, 2008

emissionwiz
  • 76846 Answers

SOURCE: have a 96 camry 4

Here is the most common cause of surges and stalls and low idle, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Dec 05, 2008

  • 6982 Answers

SOURCE: I posted a question about my 91' Toyata Tercel

Most times this is caused by an internally bypassing clutch master cylinder. If fluid is full likely that is your problem. If fluid is low, check system for leaks and replace anything that is leaking, then bleed air as you would with a brake system. (bleed any time the system has been opened except when just adding fluid)

Posted on Aug 01, 2009

  • 5 Answers

SOURCE: Soft clutch pedal

well depends on how much milage on the clutch..I would start with clutch master and slave see if that helps because u have to replace any how.....good luck

Posted on Jun 20, 2010

  • 7353 Answers

SOURCE: my celica clutch does not

your question is confusing.Did you check the clutch master cylinder fluid. so if you can put in gear with the engine off and then crank the car and it moves ok, then replace the clutch master and slave cylinders. If you can put in in gear with the engine running let the pedal off and the car wont move, or it slips bad, then the clutch is bad.

Posted on Dec 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not go in to four wheel drive


Dodge Ram 1500 Questions - 4WD not engaging all the ...

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.

Diagnosing 4WD Engagement Problems on Dodge Ram ...

dodgeram.org > Main > Tech > Maintenance
Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having

2008 Dodge Ram 1500 Won't Engage 4 Wheel Drive: 20 ...

www.carcomplaints.com/Dodge/Ram_1500/.../drivetrain/wont_engage_4...
Ram 1500 Won't Shift Out Of 4 Wheel Low - Ram got locked into 4 wheel low. Found this ..... It would not go into full time 4 wheel drive or go into 2 wheel drive.

Software Update and Axle Disconnect Actuator ... - RepairPal

repairpal.com > Problems > Dodge > Ram 1500

Feb 08, 2016 | 2004 Dodge Ram 1500

2 Answers

1997 dodge ram 1500 4x4 abs light on runs fine idles good but put it into gear wont go past 35 mph engine running smooth even at 35 mph


Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...
Sep 8, 2009 - My 99 Dodge 2500 Ram won't accelerate..transmission is NOT slipping,.... It has been running fine and the check engine light even cleared itself yesterday.... So it wouldn't go into first gear and then 3 minutes later my check engine ... I have a1997 Dodge Ram 1500 with a 5.9L instead of the stock 5.2L. It ...

Dodge Ram Idle and Stalling Problems - Car Forums at Edmunds.com

forums.edmunds.com > Dodge > Dodge Ram Pickup 1500

Aug 17, 2011 - 30 posts - ‎25 authors
Learn more about Dodge Ram Pickup 1500 at the Edmunds.com ... The crank sensorwas put on however it started stalling again. ... The truck starts fine, but will only runat 2000's RPM and only then if .... Then as I start driving about 1/3 of a mile go dead again, I knockout of gear, crank back up immediately.

WILL NOT GO OVER 30MPH WITH PEDLE TO METAL ...

repairpal.com > Questions > Dodge > Charger > 2006 Dodge Charger
I WAS DRIVING FINE AND THE CAR ACTED LIKE IT GOT STUCK IN ... Then the transmission didn't want to change into 2nd gear. .... Whenever i start up my car theabs and esp light turn on and when i try driving it doesnt go over 30 mph even .... in neutral but not it just wont go up hills and i think it has something to do with

Jan 07, 2016 | Dodge Cars & Trucks

1 Answer

2004 dodge ram 1500 with the 3.7L V6 5 speed manual. The truck drives and shifts fine but after driving for a while it won't be able to shift into or out of any gear.


the reason for hard shifting and selection when running is that the clutch shaft ( input shaft) is still turning even though the clutch pressure plate is released
it can be from oil/grease on the fly wheel /pressure plate face causing it to stick when hot
it may be from sticking clutch plate on the splines binding when hot
or it could be a dry spigot bush or failed bearing in the end of the crankshaft that positions the clutch shaft
check the pedal height adjustment and the position it is from the floor when starting to engage
It may be adjustment under the dash

May 18, 2015 | 2004 Dodge Ram 1500

2 Answers

Ford transit 52 plate clutch pedal goes soft then csnt change gear then pump pedal pedal goes back to normal drive for a short while then clutch pedal goes soft again and just repeats as above just bought...


The clutch hydraulic system has a problem-either the clutch master cylinder or the slave cylinder on the bell housing may be at fault.

If the brake fluid is low in the clutch master cylinder reservoir, there may be a leak to the outside. Refill and check for leaks while someone pumps the clutch pedal. Check around the clutch master cylinder (also under the dash- if wet there around the top of the clutch pedal or if wet on the carpet below the pedal, the master cylinder is leaking.) Check the single line from the clutch master to the bell housing where the slave cylinder is. If no leaks found, likely the clutch master cylinder or the slave cylinder has failed internally.

Is it safe: there won't be any further damage caused by running it, but if shifting gets harder and harder to do, that may cause a driveability problem.

Jun 24, 2014 | Cars & Trucks

1 Answer

My 96 dodge ram 1500 2 wd automatic doesn't seem like its getting enough gas while driving


Run fault codes checking for canister purge solenoid/valve Check fuel system pressure and pressure regulator.

Apr 07, 2013 | Cars & Trucks

2 Answers

I have a 2007 Dodge Ram 1500. I had to replace the front brake pads, rotors and calipers. After bleeding the brakes I still have a soft pedal. when pressing it the pressure builds up but after pumping then...


bench bleed the master cylinder then start bleeding at the rear passenger then rear driver, front passenger then finally front driver hopefully that helps you

Jan 23, 2013 | Dodge Ram 1500 Cars & Trucks

2 Answers

1999 dodge ram 1500 5.2 4x4 when I drive it down the road it act like it's not getting gas then when I push the gas pedal down sometimes it will take off running fine and other times it will backfire try...


Pull your AIS motor off, clean with throttle body spray, especially pintle (pointed end) and hole it came out of , re-install & try again, see if that helps. If it works good for a while & acts up again, replace it.

Jul 12, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

When in gear drive


SOUNDS LIKE THE TORQUE CONVERTER CLUTCH IS NOT DIS-ENGAGING.

Mar 15, 2009 | 1994 Dodge Ram

Not finding what you are looking for?
1992 Toyota Celica Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...