Question about Toyota Sienna

1 Answer

Transmission sensor How do I know if my car is having transmission problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 12,223 Answers

Follow this steps and fix it. God bless you
First, check the transmission fluid level and condition. If you don't know how to do it, here is an illustration:
How to check the automatic fluid
With the engine idling and transmission in "Park" (some car may have different procedure, refer to the owner's manual) remove the automatic transmission dipstick and wipe it out with the clean lint-free cloth. Insert the dipstick back fully and then pull it out again. Check the fluid level; low level may indicate a transmission leak. Look at the fluid very closely. It helps if you drip the fluid onto a white paper to be able to see the fluid condition. The transmission fluid should be clean and transparent, without any metal filings or black flakes. The new fluid usually comes red. Over the time, it become more brownish, but it shouldn't be very dirty or black. Look at the image. Try to smell the transmission fluid; It should not have a burnt smell.
All this may seem difficult, but when you check few similar cars, you'll be able to see the difference. If the transmission fluid is too dirty or black, or smells burnt, it's better to avoid such a car.
Keep in mind, however, that some modern cars don't have the transmission dipstick and require special procedure performed in the auto repair shop to check the fluid level. In this case, the only way to check the transmission is on test drive. transmission sensor - cc037824-574e-464e-b4e8-ab64c6eee062.jpg

Posted on Jul 23, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 08 grand Prix the knock sensor has gone bad (bank 2) it's in between the engine and transmission, is it possible to replace it without removing the transmission?


What code did you pull ? How do you know it's bad ?
Remove the transaxle. Refer to Transmission Replacement for the 4T65-E transmission. Drain the cooling system. Refer to Cooling System Draining and Filling . Remove the bolts (2) from the knock sensor heat shield (1). Disconnect the knock sensor electrical connector (3) from the knock sensor.

Sep 14, 2016 | 2008 Pontiac Grand Prix

2 Answers

I would to know if a bad transmission speed sensor can cause the car to jerk when you shift into drive or reverse


Hard to tell without knowing what year, make, and model of vehicle we are working on here. A speed sensor would not cause this, but bad engine or trans mounts could, or possibly a sticking valve body in the transmission.

Feb 19, 2016 | Cars & Trucks

1 Answer

I need help asap 2003 Expedition code p0171 and code p0712 i have and idea of the 1st code but whats the secound code i really need help i dont want to take it to a shop where there going to charge me alot...


P0700 Transmission Control System

P0701 Transmission Control System Range/Performance

P0702 Transmission Control System -Electrical

P0703 Torque Converter/Brake Switch B Circuit

P0704 Clutch Pedal Position Switch -Circuit Malfunction

P0705 Transmission Range Sensor/Switch Circuit Malfunction (PRNDL Input)

P0706 Transmission Range Sensor/Switch Circuit Range/Performance

P0707 Transmission Range Sensor/Switch Circuit Low Input

P0708 Transmission Range Sensor/Switch Circuit High Input

P0709 Transmission Range Sensor/Switch Circuit intermittent

P0710 Transmission Fluid Temperature Sensor Circuit

P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance

P0712 Transmission Fluid Temperature Sensor Circuit Low Input

P0713 Transmission Fluid Temperature Sensor Circuit High Input

P0714 Transmission Fluid Temperature Sensor Circuit Intermittent

P0715 Input/Turbine Speed Sensor Circuit

P0716 input/Turbine Speed Sensor Circuit Range/Performance

P0717 Input/Turbine Speed Sensor Circuit No Signal

P0718 Input/Turbine Speed Sensor Circuit Intermittent

P0719 Torque Converter/Brake Switch B Circuit Low

P0720 Output Shaft Speed Sensor Circuit

P0721 Output Shaft Speed Sensor Circuit Range/Performance

P0722 Output Shaft Speed Sensor Circuit No Signal

P0723 Output Shaft Speed Sensor Circuit Intermittent

P0724 Torque Converter/Brake Switch B Circuit High

P0725 Engine RPM Input Circuit

P0726 Engine RPM Input Circuit Range/Performance

P0727 Engine RPM Input Circuit No Signal

P0728 Engine RPM Input Circuit Intermittent

P0729 Gear 6 Incorrect Ratio

P0730 Incorrect Gear Ratio

P0731 Gear 1 Incorrect Ratio

P0732 Gear 2 Incorrect Ratio

P0733 Gear 3 Incorrect Ratio

P0734 Gear 4 Incorrect Ratio

P0735 Gear 5 Incorrect Ratio

P0736 Reverse Incorrect Ratio

P0737 TCM Engine Speed Output Circuit

P0738 TCM Engine Speed Output Circuit Low

P0739 TCM Engine Speed Output Circuit High

P0740 Torque Converter Clutch Solenoid Circuit

P0741 Torque Converter Clutch Solenoid Circuit Performance or Stuck Off

P0742 Torque Converter Clutch Solenoid Circuit Stuck On
P0743 Torque Converter Clutch Solenoid Circuit Electrical
Now i dont know a lot about automatics especially modern ones with all this fancy electronics thats used nowdays but i think its a fault with the temperature sensor for the gearbox.But where its located and what it looks like i have no idea it could even be mounted inside the gearbox .Sorry not a very good answer from a mechanic but?? very few of our europeon cars come with auto transmission .Evan when i do know whats wrong i cannot buy the parts for the gearbox as only re-con boxes supplied by the dealer so best advice is to try a specialist in auto box repairs only .PS some of my best students when i used to teach mechanics many moons ago were the girls so no excuses like iam only a girl please

Apr 22, 2013 | Cars & Trucks

1 Answer

2002 buick lesabre transmission sensor bad


This is no transmission sensor problem, it is a mechanical issue in the transmission.

Jul 09, 2017 | 2002 Buick LeSabre

2 Answers

My 91 dodge stealth is in limp mode how do i fix this transmission problem


Your car is in "limp"mode because the computer doesn't know what speed your doing,So it doesn't shift,
There are three possible reasons for this,
#1= input sensor faulty on transmission,
#2=output sensor faulty on transmission,
#3=speed sensor faulty on transmission,
you need to have the transmission codes read to know which one,Autozone checks codes for free.

Jan 13, 2010 | 1991 Dodge Stealth

2 Answers

My 2000 dodge durango will not shift into over drive took it to autozone and the code came back as a sensor in the transmission. How do I get to it to change it out.... Chould it really just be a sensor?...


It could easily just be a sensor, but if you don't know much about transmissions, you are best served to take it to a transmission shop and let them fix it. Now days, transmissions are very hard to work on yourself.

May 08, 2009 | 2000 Dodge Durango

1 Answer

1993 olds achieva-gears won't shift-what sensors on transmission


Had this problem when I rebuilt my engine. Turns out, that I had plugged back in a sensor that was previously unplugged. There is a known manufacturer's defect on some Achievas where a sensor on the transmission was mounted upside-down. Symptoms caused by this are primarily the car staying in gear (and thus stalling) when stopped, and failing to downshift while slowing down. Just unplug this pesky sensor, located roughly underneath and to the battery side of the throttle body. Be careful, though, because I don't know if running long term in this configuration will lead to transmission damage (although my transmission doesn't show any signs of troubles now that the thing is disconnected.)

Apr 22, 2009 | 1993 Oldsmobile Achieva

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...