Question about Cars & Trucks

Open Question

Hyd mech problems saws

Everything works fine but the blade will not start. The hydraulics are on and the clamps are in the closed position, the head is in home position and the head advance/return switch is on hold. Any ideas?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1894 Answers

SOURCE: bmw 850 csi hyd problem

replace is the only fix

Posted on Jun 09, 2008

Ad
  • 1118 Answers

SOURCE: Car not starting and juice not going from battery to car properly

your buddy getting a shock thru the body tells me you could have burnt thru one of the cables from the battery. chk. cables for burn spots especially around where it comes in contact with metal. consentrating on the positive cable, but chk. all even ground cable and ground straps. also chk. around starter selonid, there might be a fusible link there as well thats burnt. to chk. fusible links if you find one, grab ahold of it and pull, if its burnt it will pull apart. also chk. around battery too. if you are not sure what a fusible link looks like ask someone who does. like your local michanic. if you need more info just ask, i'll help as much as i can.



Posted on Jan 08, 2009

  • 1 Answer

SOURCE: Jeep Liberty 2005 Cannot shut tailgate window......

Hi all,

I had the same problem onmy dad's Jeep KJ (Cherokee/Liberty) so i went ahead and unbolted the tailgate handle;

First you need to take off the plastic inner tailgate cover (doh), then carefully pry away the the black liner and you'll see 2x 10mm hex nuts, unscrew both. Then on the latch outer side of the tailgate remove the upper 2 torx screws, then loosen one of the clamps of the connecting rod between latch and handle.
While pulling out on the handle (needed to clear the mechanism from the sheetmetal) you'll be able to carefully remove the complete doorhandle assembly.
There's still one wireloom attached to the handle, this is the culprit, It's the little actuator switch that's need liberal amounts of lubricant such as WD40 or similar.
I actually removed the switch and pushed it several times to full stroke after i lubricated it, then reconnected it and presto! The rear window unlocked every single time by means of the doorhandle instead of using the wireless remote...

Easy fix, done in half an hour. Saved you $ 300 on parts and labour

Good luck!

Nathan ter Stege (the Netherlands)

Posted on Jan 13, 2009

  • 129 Answers

SOURCE: wipers willnot return to park position

I've fixed this problem before. You have to disconnect the wiper transmission from the wiper motor. Put wipers in off position, unbolt the plate on top of wiper, turn wipers on then off. In the off position see where the wiper transmission is position in relation to where the park position is, remove the top plate from wiper motor and position it so as to be able to reconnect the wiper transmission now in the proper place. Please keep me informed. thanks you

Posted on Jun 03, 2009

  • 1 Answer

SOURCE: Parked a 2004 Jaguar S

Hi, i have had the same problem, only mine would start, but my jag was stuck in P, what you need to do is remove the J gate cover, pull it from where the ash tray upwards, and then you need to go to the left hand side of the gear lever,and you will see a little plastic thing, that is similar to a butterfly nut, turn it counter clockwise with a straight screwdriver, and this should release the gearbox,and then try putting it in Nutral, also try locking and then unlocking car to reset imobiliser.

Good luck, this worked for me.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yanmar b15 excavator Boom and arm will not operate. everything else works fine. HELP.


Is there an interlock on the boom that wont allow it to operate if the front blade is not set? There could be an issue with hydraulic fluid, pump or PTO.

Feb 08, 2017 | Cars & Trucks

1 Answer

Bmw 850 csi hyd problem


replace is the only fix

Jun 09, 2008 | 1994 BMW 8 Series

1 Answer

What is destroying front hyd. seals?


Mechanic is not doing the job correctly and should be doing subsequent repairs free or paying for someone else to do it right.

Dec 09, 2014 | Cars & Trucks

1 Answer

My mini excavator 334 lost hyds to boom and tracks. blade still goes up and down .the red ! light is on


could be a bad solenoid find out which on works that solenoid , make sure you are getting power to it could also be fused ck that first , cannot be to much to fix ,get a manual of it to ck the solenoid position

Nov 25, 2014 | Mini Cars & Trucks

1 Answer

P0303 intake backfire


problem with no3 cylinder hydraulic lifter
pumping up and holding the valve off the seat

Sep 29, 2017 | Ford Cougar Cars & Trucks

1 Answer

2000 olsmobile alero sunroof stuck open


HAVE SAME PROBLEM ON MY ALERO , WOULD CLOSE TO VENT POSITION ALL OTHER FUNCTIONS WORKED FINE. TALKED TO A MECH. FRIEND AND FOUND A WAY TO CLOSE MANUALLY BUT YOU DO HAVE TO DROP FRONT LEFT CORNER OF HEADLINER.
THE MOTOR IS UNDER SUNVISOR AREA AND YOU'LL NEED AN ALLEN(SPELLING)SOCKET TO CLOSE ROOF

Oct 20, 2012 | 2001 Oldsmobile Alero

2 Answers

When clutch pedal depressed clutch does not move away from fly wheel started 2 1/2 days ago. is cluth hydraulic or cable? thanks ray


in a car this 'new' prob. hydraulic. check clutch fluid reservoir- should be near brake fluid res.- will be smaller- if fluid is low, or empty- may be clutch master cylinder, or clutch 'slave' cylinder is leaking. check for leak under car, should smell like 'brake' fluid. if your brake master- both reservoirs are to the full line, and there's fluid under car, close to where clutch master is located, or near front of , or side, of tranny- then it's a clutch problem of some kind (as if you didn't already know this!!) relatively new vehicle (by my standards!), should have hydraulic clutch.
do you mean- when you depress the clutch pedal, it goes to the floor, and you can't shift into any gear??
should have asked this first! front wheel drive or rear? i'll guess front wheel drive. may have hyd. fluid leak in master or slave. (apologize for 'terms', but as 'male & female connectors', it's traditional, non-racist and non-sexist nomenclature!!) gotta' be careful, in the 21st century!! if there are, as i stated previously, 2 similar reservoirs, close to each other, then you prob. have hydraulic clutch. may need 'master' rebuilt, or replaced, or 'slave' replaced-it can be rebuilt, but prob not cost effective!
sorry to be 'long-winded/ texted', good luck!

Oct 23, 2009 | 2000 Hyundai Accent

2 Answers

2000 Dodge Intrepid


it's a dodge!!! lol

Aug 10, 2008 | 2000 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...