Question about Chevrolet Impala

Open Question

I need torque for transmission pan bolts for 2004 chevy impala 3.8

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

Ad
  • 64 Answers

SOURCE: torque settings for transmission pan on 2000 chevy

Good rule of thumb is 15-18 inch lbs.More important is doing them evenly,like in an x type pattern.Good luck,
ChevRev

Posted on Mar 28, 2009

  • 158 Answers

SOURCE: 2000 sebring transmission pan torque spec

10 ft lbs no real patterm needed

Posted on Apr 03, 2009

  • 743 Answers

SOURCE: oil and transmission pan bolt torque specs

124 inch lbs on oil pan...Transmission pan 13 ft lbs.

Posted on Oct 12, 2009

REDOIL
  • 355 Answers

SOURCE: What is the transmission pan bolts torque

they are 13ft lbs

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Torque specs on transmission pan 400 turbo 1973 chevy corvette


Your local Chevy dealer parts/service dept. should be able to answer this, or look it up for you.

Sep 25, 2017 | Chevrolet Corvette Cars & Trucks

1 Answer

How do i change the transmission gasket on a 1988 chevy Silverado


Raise vehicle and support on jack stands. Loosing nuts on transmission making one side lower than the other this will allow you to drain fluid. Drain fluid remove bolts on pan. Remove pan remove old gasket, clean pan and transmission edge, replace with new gasket. Replace pan and bolts. Torque to spec and refill transmission

May 05, 2016 | Cars & Trucks

1 Answer

Can you drain torque converter when changing transmission fluid on a 2004 pontiac vibe


Basicly just remove the bolts in the transmission oil pan, make sure you have a drain pan under it and leave a couple bolts in, loosen the remining bolts and let the oil drain then loosen and remove them slowly as oil will be draining out while you are doing it.

Change the filter and after cleaning the pan install a new gasket and put it back on. Do not tighten the bolts too tight because it will distort the gasket and it will leak.

Pour about 5 quarts of transmission fluid in the trannsmission and start it up, look for leaks, and finish filling it to the cold line on the dip stick. If there are no leaks run until its warmed up and make sure the fluid level is at the full hot line on the stick.

There is really no way to drain the converter.

Jan 09, 2013 | 2004 Pontiac Vibe

1 Answer

I need to change transmission filter and fluid on my 2004 chevy impala and being single and all and female I'm not up to car care that great. Where is the trans filter located. Trying to do my s


The transmission filter is under the car under the transmission fluid pan. you have to lift up your car loosen the volts, take of the pan, take of the filter put in the new one, put the new one on, put the transmission fluid pan in place, put the bolts and tighten them, lower the car and put however much transmission fluid your car takes. Hope the best of luck for ya.

Mar 03, 2012 | Cars & Trucks

1 Answer

I need to know he torque spects for the oil filter container the bolts on to the moter on a 94 BMW 318i...there are 6 bolts...I also need to know the torque spects on the alternator mounting bracket...


OIL PAN OR TRANSMISSION PAN BOLTS TORQUE ABOUT 7 FT LBS. CAN GET SPECS ON BOLTS SIZES. IF BOLTS SIZES IS 13M I4M 15 M TORQUE BOLTS ABOUT 55 TO 80 FT LBS

Nov 11, 2010 | 1994 BMW 3 Series

1 Answer

What is the torque setting for the valve covers on a 327 chevy engine? Its on a 1967 Chevy Impala but not original motor. Thanks!


The torque spec on the valve cover bolts is 3 ft pounds or 36 inch pounds.
This spec is good for all Chevy small blocks.

Jul 22, 2010 | 1983 Chevrolet Impala

1 Answer

What is the torque for oil pan bolts on 2004 chevy colorado


For re-install Oil Pan, checj this procedure...


10c561d.jpg

Fig. Oil pan sealant application areas-Canyon & Colorado

  1. Apply a bead of sealant around the oil pan as shown.
    NOTE Install the oil pan within 10 minutes of applying the sealant.

  2. Install the oil pan, making sure that the pan if positioned fully rearward against the transmission mounting surface.
  3. Install the oil pan bolts and tighten the side bolts to 18 ft. lbs. (25 Nm). Tighten the end bolts to 89 inch lbs. (10 Nm).
  4. Connect the engine wiring harness retainers to oil pan.
  5. If equipped with 4WD, position the steering gear upward to the frame assembly and install the steering gear mounting bolts.
  6. Install the four lower transmission mounting bolts and tighten to 37 ft. lbs. (50 Nm).
  7. Install the nuts securing the fuel pipe bracket at transmission and tighten to 15 ft. lbs. (20 Nm).
  8. Install the service slot plug.
  9. Right front halfshaft, if equipped with 3.5L Engine
  10. If equipped with RWD, install the power steering gear.
  11. If equipped with 4WD:
    1. Position the differential carrier assembly to the frame.
    2. Install the differential carrier assembly bushing to frame bolts. Tighten to 112 ft. lbs. (152 Nm).
    3. Install the front driveshaft.

  12. Install the engine splash shield.
  13. Install the oil dipstick tube. Tighten the bolt to 89 inch lbs. (10 Nm).
  14. Fill the engine with oil to the correct level.
  15. Start the engine and check for leaks.
Hope help with this (remember rated this help).

Mar 12, 2010 | 2004 Chevrolet Colorado

1 Answer

How to remove oil pan on kia sportage 99? thanks,Zak.


Hi Zak:
Kia Sportage 1998-02 Repair Guide
Oil Pan - Removal & Installation
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:

    Negative battery cable 2 Top intake manifold bracket bolts Front 3 axle housing mounting bolts, 4WD only Left front bushing from the axle housing mount and lower the front axle housing Both gusset plates from the engine Transmission under cover Engine under cover Oil pan mounting bolts and using a scrapper tool separate the oil pan Oil pan Oil strainer assembly Oil baffle 76b1888.jpg


  4. Fig. Exploded view of the oil pan assembly mounting

To install:


f149924.jpg
Fig. Tighten the oil pan bolts in sequence
  1. Clean the engine block, oil pan and baffle pan surfaces of any gasket material.
  2. Apply a continuous bead of Loctite Ultra Blue 587® silicone sealant around the baffle pan.
  3. Install or connect the following:

    Oil baffle. Torque the bolt to 84 inch lbs. (9.5 Nm). Oil strainer. Torque the bolts to 84 inch lbs. (9.5 Nm).
  4. Apply a continuous bead of Loctite Ultra Blue 587® silicone sealant around the oil pan.

    Oil pan. Torque the bolts to 84 inch lbs. (9.5 Nm). Transmission under cover. Torque the bolts to 84 inch lbs. (9.5 Nm). Gusset plates to the engine. Torque the bolts to 33 ft. lbs. (45 Nm). Engine under cover Front axle housing into position. When properly aligned, torque the bolts to 48 ft. lbs. (65 Nm). Intake manifold bracket bolts. Torque the bolts to 34 ft. lbs. (65 Nm). Negative battery cable
  5. Fill the engine with clean oil.
  6. Start the vehicle and check for leaks, repair if necessary.

Hope helps with this (remember rated this) Good luck.

Jan 12, 2010 | 1999 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

461 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...