Question about Mazda Cars & Trucks
The sensor should be in the side of the transmission.
The speedo would stop working, or you would have shifting troubles with the transmission. And you would have a check engine light on with a trouble code for the sensor.
Posted on Jul 23, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
well, with all that you have changed the only two possible things that are left PCM and the ECM....
Do you have an alarm system on this vehicle? If you purchased this car second hand it may have something that is inhibiting the engine from firing. From what you have told us here that would be where I would start looking.
I really hope this is helpfull
Posted on Aug 10, 2008
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 20, 2009
on the rear calipers there is a 14m bolt on the back of the caliper beside the parking brake braket.
remove bolt on the inside there is a hex screw. as you turn it the piston gose in or out.
check calipers for damage.
Posted on May 13, 2009
my 2001 mazda protege starts hard, idles low and high at various times (never normal) and it acts as though its going to stall at all times. sparks and wires are changed no help, changed air filter no help. any idea on what to do?
Posted on Nov 26, 2009
The front O2 sensor is located at the bottom of the heat shield just before you get to the exhaust. It has a wire connected to it. You will have access to this from the top of the car.You may need a O2 sensor tool that you can borrow from most major auto parts retailer. Disconnect the battery first then unplug the sensor. Using the O2 socket remove the sensor. The sensor should come with a packet of anti seize, apply it to the threads and install it. Plug the sensor back up and connect the battery and you should be done.
Posted on Apr 20, 2010
Tips for a great answer:
Nov 30, 2016 | 2001 Mazda Protege
Sep 21, 2011 | 2001 Mazda Protege
Sep 04, 2011 | 2001 Mazda Protege
hi it is mounted to the strut tower between it and the firewall on the passenger side will have a black vacuum hose connected to it :)
Feb 27, 2011 | 2001 Mazda Protege
Jun 15, 2010 | 2001 Mazda Protege
May 03, 2010 | 2000 Mazda Protege
Sep 01, 2009 | 2002 Mazda Protege
Jul 04, 2009 | 1994 Mazda 323
May 23, 2009 | 2001 Mazda Protege
236 people viewed this question
Usually answered in minutes!