Question about 1992 Acura Vigor

2 Answers

Can't find a clutch slave cylinder for my 1992 acura vigor GS 2.5, 5 cylinder. I need to rebuild the one I have! How can I rebuild the clutch slave cylinder?

Posted by on

  • Fr Benedict Simpson
    Fr Benedict Simpson Feb 28, 2015

    Dorman Part Number CSK352151 is the rebuild kit. It is readily available.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Actually, they are not available at this time. None in America at this time. Dorman makes a rebuild kit for it.

Posted on Feb 28, 2015

Get it online
Doesn't cost much
Lots of places have it
You not going to rebuild a part like that
there too cheap new

Posted on Jul 22, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are Reasons why ac not blowing cold cold air 1992 acura vigor


Most likely in a vehicle of that age is that the refrigerant has leaked out due to bad seals in the compressor or in the connecting lines. Have a professional check your refrigerant level and test the operation of your compressor clutch.

Jun 23, 2014 | 1992 Acura Vigor

1 Answer

How remove and replace clutch slave cylinder 1996 acura integra


10 mm line wrench and a 12 mm wrench or socket. Takes 2 people to bleed it. Look at your master cylinder inside the cabin, they leak too. Most people recommend replacing both at the same time. On a car this old, you might replace the rubber hydralic line too.

Jun 19, 2014 | 1996 Acura Integra GS-R

1 Answer

Clutch hydraulic slave


if the MC (master cylinder) goes low, for the chutch , bingo
bad MC or slave. most times its the slave.
if either leak outside they are bad.
it can be tested, with 2 persons, one at clutch pedal
one at slave lever. looking, (ask how)

Jan 18, 2014 | 1992 Acura Vigor

1 Answer

Slave cylinder


I put that question into Google & there are a
dozen places you can get it online !!!!

Jul 22, 2013 | 1992 Acura Vigor

2 Answers

I have a 92 acura the pedal clutch sticks to floor and have no clutch


Clutch fluid...check the lines for leaks and what not. In my experience, the clutch is blow....prob need new pressure plate!

Sep 16, 2012 | 1992 Acura Integra Hatchback

1 Answer

Confused on #5/#6 by distributor to w/c spark plug # to install.


For the 1992 Acura Vigor: This is a five (5) cylinder engine!
2.5L SOHC In-Line 5-Cylinder:
Firing Order:
1-2-4-5-3

Cylinders:
(back)
....5
....4
....3
....2
....1
(front)

Ignition Coil Connections:
................(back)..............
|...1....2....3....C....5....4...|
................(front)
"C" is not a "6" and is the Coil Connection

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 19, 2010 | 1992 Acura Vigor

2 Answers

92 acura vigor clutch replcd still wont go in gear


Is all the air bled out of the hydraulics??

I would then suspect a faulty clutch component.

Was it like this before the overhaul??

Mar 10, 2010 | 1992 Acura Vigor

1 Answer

Need to find heater core and hoses on 1992 acura vigor gs


On a Honda built vehicle, the suspect item is usually the heat valve. Look for two hoses about 1" in diameter going toward the passenger compartment from the engine. One of them will have a valve inline usually. Another possible problem is a bad water pump, however, that will also cause a car to run hotter than usual as well.

Dec 14, 2009 | 1992 Acura Vigor

1 Answer

1992 Acura Vigor GS: Stabilizer bar link bushings.


The dealer should have the replacement bolts such as Delray Acura or go to a wrecker that has a 92-94 Vigor, they're all the same.

Sep 06, 2009 | 1992 Acura Vigor

2 Answers

My acura legend ls hard to go in first gear and reverse and I gotta keep stepping on the clucth so it could go in gear what could the problem be?


It sounds a clutch release problem. Have you checked or have you added clutch fluid? It is likely either a bad slave cylinder or Clutch Master cylinder.

Mar 04, 2009 | 1992 Acura Legend

Not finding what you are looking for?
1992 Acura Vigor Logo

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...