Question about Cars & Trucks

Open Question

How to change serpentine belt on gmc acadia

Serpentine belt is shredded. i need to change it. how do it do this

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 218 Answers

SOURCE: serpentine belt keeps shredding on the inside

PULLEY ALIGNMENT.WITH BELT ON LOOK AT THE PULLEYS FROM THE SIDE.U MUST HAVE A PULLEY THE IS MISSALIGNED

Posted on May 06, 2009

  • 275 Answers

SOURCE: trying to replace the serpentine belt on a 1995 gmc van

you will have to get ahold of a book for it or go to a junkyard and find one like yours and get the belt routing decal

Posted on Nov 12, 2008

  • 1 Answer

SOURCE: 2008 gmc acadia low beam light bulb changing

how do you change the low beam light bulb on the 2008 gmc acadia

Posted on Apr 02, 2009

  • 1 Answer

SOURCE: how to change the serpentine belt on a 2001 GMC

Where is the serpentine belt tensioner on a '03 gmc yukon?

Posted on Feb 03, 2010

  • 451 Answers

SOURCE: 02 Ford Expedition need diagram change serpentine belt

log itno autozone.com

they have free tech solutions and diagrams...........

Posted on Feb 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change running light


"You Tube" will have a video just for you. Punch in your information and I am sure there will be an answer there for you.

Nov 26, 2015 | 2012 GMC Acadia SL 4dr SUV 3.6L V6 6-speed...

1 Answer

Does tensioner belt need to be put on( car ) just to remove old worn shredded serpentine belt?


There are belt tensioners and there are serpentine belts not sure what a tensioner belt is. You do not have to have a belt tensioner on a motor to remove a serpentine belt.

Jun 14, 2015 | Cars & Trucks

1 Answer

My steering wheels gets hard when i turn or reverse in my 2008 gmc acadia what does that mean


This just means the drive belt to the power steering pump is loose. Tighten the belt and you'll be good to go.

Aug 26, 2014 | 2008 GMC Acadia

1 Answer

SERPENTINE BELT


I had a similar problem that turned out to be some bad rubber bushings on the alternator mounting bolt. The alternator would shift from side to side causing misalignment with the serpentine belt. To check this, you will need to remove the serpentine belt and take a close look at those bushings. If they are original equipment, I would change them out. In my case, everything lined up fine, but with the engine running, the alternator would shift position and shred the serpentine belt. Good luck.

Jan 07, 2013 | 1994 Plymouth Voyager

1 Answer

Why is my serpentine belt shredding on my 1989 gmc sierra c2500


Mine was doing the same thing. I realized that one of the support brackets for the power steering pump was brocken allowing the pump to pull slightly away from the engine moving the belt out enough to be cut by the other pullies. I hope this helps! Good luck!

Mar 01, 2012 | GMC C2500 Cars & Trucks

1 Answer

1988 V6 safari van serpentine belt comes off and gets shredded how to fix


you need to wire brush your pulleys so all grooves are clean and see if one of your engine components that run off the belt are loose or have a bad bearing good luck

Jan 03, 2012 | Cars & Trucks

2 Answers

I have a 1999 Mercury Sable. The only problem I have had with the car is the serpentine belt. It started 3 months ago . . . the engine was overheating and the belt was shredding. I bought a belt tensioner...


take the belt off and carefully check to see if any of the pulleys are out of line and check to make sure they spin smooth and true check for bearing wear and noise in any of the pulleys cause it sounds like simply there is a pulley out of line

Oct 22, 2009 | 1999 Mercury Sable

1 Answer

I have a 1999 Mercury Sable. The only problem I have had with the car is the serpentine belt. It started 3 months ago . . . the engine was overheating and the belt was shredding. I bought a belt...


is the a/c working ok??? shredding the belt may be cause by the a/c compressor problems. the "chunk" maybe not, but shredding tells me something does not spin when it should. I dont know why the mehanic put a new pump on that had a problem with the pulley, it should be smooth. anyhting that the belt runs should be smooth and east to turn, make sure that all of the grooves are clean, no remnants of the old belt.

Oct 20, 2009 | 1999 Mercury Sable

1 Answer

2008 gmc acadia low beam light bulb changing


how do you change the low beam light bulb on the 2008 gmc acadia

Feb 24, 2009 | 2007 GMC Acadia SLE

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...