Question about 1996 Oldsmobile Cutlass Ciera

Open Question

Horn fuse my horns stopped working. nothing in the dash fuse box indicates horns. where would I find the correct fuse for the horns and/or what else could possibly be faulty rendering the horns unoperateable?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Thermo King
  • 593 Answers

SOURCE: 2006 Dodge Stratus, Horn sounds sick and the fuse

Most times the horn has water in it. You can remove the horn and try to get any water or dirt out. Also some have an adjustment knob / screw on the side, which can be turned to increase the loudness. In some cases it just goes flat and needs to be replaced.

Posted on Apr 09, 2010

Ad
ZJLimited
  • 17970 Answers

SOURCE: need 1997 olds bravada fuse box diagram

Fuse Block is in driver side... for details can search in the 1997 Oldsmobile Bravada - Owners Manual (page 275 and next)moz-screenshot.png; as sample, check this...

b23e77b.gif

Hope this help (remember comment and rated this).

Posted on Apr 16, 2010

ftw1952
  • 10319 Answers

SOURCE: Horn went off when no

The horn contact is embedded in the outer horn pad
The change in the climate eventually shrinks the pad and the horn will go off by itself
Replace the horn pad is all that can be done

Posted on Aug 11, 2010

  • 435 Answers

SOURCE: My 2003 Alero's horn doesn't

Check with a voltmeter that current actually reaches the horn connectors. If it does receive electricity, then the horn has blown..(no pun). If it doesn't receive electricity then the cable has been severed somewhere between the fuse and the horn.

Posted on Oct 16, 2010

  • 193 Answers

SOURCE: I have a 2004 Alero.

Either by replacing the actual horn switch assembly or the wire that runs down the steering column. Sounds like the switch is bad but somtimes the wires short to groung causing the horn to work. Depending on how hard you beating the steering wheel could tempory fix either problem.



Please take a moment to rate my answer...........Thanks

Posted on Dec 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't my horn work? I have a 1996 Ford aspire manual and my horn doesn't work. Also, the airbag light is blinking. I just bought this car two months ago and haven't had a problem yet, just wondering...


Assuming the 15A STOP FUSE in the dash fuse box is OK, he problem may be failure of the horn relay, the left and/or right horn switches, the clockspring assembly or the horn itself.

Feb 10, 2015 | Ford Cars & Trucks

1 Answer

Location of horn fuse


There should be a fuse for the horns. Your owner's manual would give the location. It may be in the fuse/relay block under the hood. Is there another fuse panel under the driver's side dash?
There is also a horn relay in the horn circuit. This should be in the under hood relay block, but they only rarely are the problem. The most common problem with no horn is the horn switch under the horn pad on the steering wheel. The metal contact strips often get bent out of shape. You would have to pull the horn pad off to check. The pad may be held on by plastic clips, or maybe Phillips head screws from the back of steering wheel. If that part looks good, you would probably need a voltmeter or test light to start checking for power along the circuit. Sometimes just finding the horns themselves can be difficult. Maybe behind the grill, or seen from inside a fender well (behind the fender inner liner), or mounted to a lower radiator support...somewhere on the front of car.

Jul 22, 2013 | 1996 Oldsmobile Cutlass Ciera

1 Answer

My horn stopped working on my 1998 Explorer. Is there two fuses box


There is One under hood and one under dash.Check owners manual under fuses.If fuse is ok it could be horn relay or horn itself bad.If you disconect horn and put a test lamp on horn wire,have someone blow the horn if test lamp. lights up ,horn is bad

Nov 23, 2010 | 1998 Ford Explorer

1 Answer

2008 Ford Escape Horn fuse keeps blowing after replacing alternator. Horn sounds once then the fuse blows. Also radio and song info that displays in the dash console with the compass does not work... The...


I would trace the wire from the horn and see if it was inadvertently damaged when the alternator was installed. If you have a voltmeter, you can remove the horn fuse and check to see if there is continuity between the horn (non hot side) of the fuse and the car body. This would indicate a short in the wire running from the fuse box to the horn. You can also look around the alternator mounting area to see if any wires are being pinched. Hope this helps. Good luck!

Mar 10, 2010 | 2008 Ford Escape

1 Answer

Location of the Horn Relay on a 2005 Ford Taurus Horn doesn't work fuse is Ok and wiring looks good, as well as the horns.


horn may be bad too.

Visual Inspection Chart Mechanical Electrical
  • Horn
  • Horn switch
  • Horn relay
  • Battery junction box (BJB) fuse 101 (60A)
  • Central junction box (CJB) fuses:
    • 216 (15A
    • 230 (15A)
  • Wiring harness
  • Loose or corroded connections
  • Speed control servo or jumper
  • Clockspring
  • Generic electronic module (GEM)


horn relay is in central junction box (fuse panel) under left side of dash.

Nov 03, 2009 | 1999 Ford Taurus

2 Answers

My brake lights wont work,i checked all the fuses,bought new bulbs,and bought a brake switch,and still nothing.my regular lights come on,just my brake lights dont work.dont no if this is part of the...


Just had a similar problem. Brake (stop) lights and horn didn't work. Couldn't find mention of stop lights in fuse chart. Found horn fuse to be slot 21 in the engine fuse block (not the fuse block in car interior). Replaced 15A fuse and all now ok.

Aug 21, 2009 | 2005 Mazda 3

2 Answers

Bought cavalier used, horn worked then stopped


actual horn broken , get a new horn a fit it

Jul 30, 2009 | 1996 Chevrolet Cavalier

1 Answer

Looking for which fuse is for the horn. I found both fuse boxes


under hood fuse number 42 (stop, Horn)

ther should also be a relay under dash

Apr 02, 2009 | 1993 Honda Civic 4 Door

2 Answers

Horn don't work 1992 jeep


The horn is located in the front bump on the drivers side. You'll need the remove the side cap to access the horn itself. As for the fuse, check under your dash on the drivers side. You will see the fuse box. Printed in white type up-bove each slot, should indicate which one the fuse watches, there should be one for horn. If you can't find it, then one by one remove the fuses and check to see if any have blown.

Mar 28, 2009 | 1992 Jeep Cherokee Sport

Not finding what you are looking for?
1996 Oldsmobile Cutlass Ciera Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...