Question about 1996 Isuzu Rodeo

Open Question

Troy built lawnmore model 13av6okgo11

On troy built lawn tractor replaced drive belts cant remember where idler pully spring goes model number 13av60kgo11

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

egoboss187
  • 53 Answers

SOURCE: squeeling noise when running until warmed up

put on belt dressing

Posted on Nov 30, 2008

motor1258
  • 6674 Answers

SOURCE: Need simple question answered about 1990 Izuzu Trooper.

One way you can usually tell is that the tensioner base mounts to engine with a bolt in the center of the casting, & pulley is offset from that casting. Put your wrench on the offset pulley bolt to relieve tension. There are various set-ups on that engine so maybe we better confirm which engine it is ?

Posted on Apr 12, 2009

SOURCE: idler pully set bolt,standard or reverse thread?

standerd left loose

Posted on Jun 01, 2009

jturcotte
  • 8175 Answers

SOURCE: ac is there a idler

Yes, there is an adjuster pulley. See pics below.

4-cyl engine:
jturcotte_1855.gif


6-cyl engine:
jturcotte_1856.gif

Posted on Jun 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace fan belt


draw a diagram of the old belt position before starting so that you can remember where it goes. The idler pully will have a nut that has to be loosened. Just behind the idler will be a long bolt that when turned releases the tension on the belt. screw it until you can easily remove the belt. replace the belt as per your diagram and retension the belt when you are satisified that sufficient tension on the belt exists tighten up the nut of the idler pulley

Jan 08, 2013 | Ford Cars & Trucks

1 Answer

Idler pully on serpentine belt


Your tension spring is shot. purchase a new idler pulley and tension arm bracket. that should fix it.

Apr 01, 2012 | 2000 Chevrolet Prizm

3 Answers

My belt on a 1989 suburban is scretching. how do i tighten it?


The drive belt has an automatic tensioner pulley. It will be a pulley on it's own attached to an arm. It'll be the top left pulley under the drive belt if there are only 2 at the top, or it'll be on the top righton top of the drive belt if there are 3 or 4 pulleys across the top.

Check to make sure it is moving freely. You can do this by attaching a wrench to it and moving it down if it is under the belt, or up if it is ontop of the belt. It should require a bit of force. If it doesn't move or is easy to move then it needs to be replaced. If it feels like it's moving freely and the spring seems strong then your belt is stretched past it's limit and needs to be replaced.

Alternatively it may be screeching due to a pulley seizing up. Check to make sure things like the idler pulleys or the A/C and Alternator pulleys move freely.

Jan 06, 2011 | 1989 Chevrolet Suburban

1 Answer

My belt is in place on my 1997 ford taurse i just dont know how to tighten the belt where do you tighten it at?


on these newer cars with one belt they have spring loaded tensioner. looks like idler pully but pivots to tighten belt they are good for spring inside going bad. usually held in with on bolt next to pully.

Dec 22, 2010 | Ford Taurus X Cars & Trucks

2 Answers

My alternator belt came off and cant figure out how to put back on i got it on all the pullys but theres still alot of slack


Sounds like it's not on the idler gear. Look for a diagram of the belt routing on a sticker under the hood. Basically the smooth side of the belt goes on the smooth pulleys and the grooved side of the belt goes on the grooved pulleys.

Oct 29, 2010 | 1994 Chrysler LeBaron

2 Answers

REPLACE SERPENTINE BELT ON 1997 PONTIAC SUNFIRE


give these websites a try www.alldatadiy.com and www.autozone.com and drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.

Nov 12, 2009 | 1997 Pontiac Sunfire

2 Answers

How do i change the fan belt


well has soon as you loosen and take out the alt the belt will become loose then put alt on it will slide down to put belt around and then pull up on alt and tighten it up

Jan 25, 2009 | 1988 Mazda B2200

2 Answers

Replacing the alternator belt on 2001 kia spectra


Then you don't take anything off. There will be a spring loaded idler that tensions the serpentine belt. Take a socket or long 12 point wrench and attach to the center bolt of the tensioner, then rotate the idler wheel away from the belt, take the belt off. Slowly release the spring tension of the idler.
The 2nd belt should be set up the same way.

Jan 23, 2009 | 2001 Kia Spectra

2 Answers

Serpentine belt installation


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} 1 To replace a worn belt, locate the idler or generator pulley.
2 Loosen the hold-down fastener for the idler or generator pulley.
3 Pry the idler or generator pulley inward to release the belt tension and remove the belt.
4 Match the old belt up for size with the new replacement belt.
5 Observe the belt routing diagram in the engine compartment.
6 Install the new belt over each of the drive pulleys. Often the manufacturer recommends a sequence for feeding the belt around the pulleys.
7 Pry out the idler or generator pulley to put tension on the belt.
8 Pry out the idler or generator pulley to put tension on the belt.
9 Install the belt squarely in the grooves of each pulley.
10 Before adjusting belt tension, check for proper pulley alignment. This is especially critical with serpentine belts. Measure the belt deflection in its longest span. If a belt tension gauge is available, use it and compare the tension to specifications.
”If a belt is too tight, wear to bearings for the water pump, alternator, and engine crankshaft can result.”
11 Pry the idler or generator pulley to adjust the belt to specifications.
12 Tighten the idler or generator pulley fastener.
13 Start the engine and check the belt for proper operation.

Jan 10, 2009 | 1998 Ford Escort

1 Answer

Surpentine belt.


depends on which v8 you have....the 4.7 the routing is as follows it goes under the waterpump pully over the alternator down and around the power steering pumpto the crank...it goes under the bottom of the crank to the idler pully.the flat side of the belt goes ver the idler then around the automatic tensioner to the ac compressor.
on the 5.2 and 5.9 it routes starting at the idler pully the flat side goes undr the idler the up to the ac compressor around the compressor and down to the power steering pump ... around power stering pump to waterpump where the flat side is against waterpump pully around water pump down and around crank up it automatic tensioner....around tensioner and up and over alternator

Nov 30, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
1996 Isuzu Rodeo Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...