Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Boritz2: there are several speed sensors on this vehicle, so I will give you the locations of all of them due to the fact that I don't know which one you are seeking.
There are speed sensors located at each wheel to work with the ABS unit.
On the trans-axle, on the driver's side near the top of the transmission.
I hope this has been helpful to you.
Is there a reason you are looking for the speed sensor?
Posted on Apr 07, 2009
1990 Chevrolet Cavalier 2.2L TBI 4cyl
The Crankshaft Position Sensor is located under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block.
Fig. 1: View of the CKP sensor-to-crankshaft reluctor relationship
Crankshaft Position (CKP) Sensor
A magnetic crankshaft sensor (Hall Effect switch) is used which is remotely mounted on the opposite side of the engine from the DIS/IC module. The sensor protrudes in to the engine block, within about 0.050 in. (1.27mm) of the crankshaft reluctor.
I really hope help you wuth this (rated this help). have a nice day, good luck.
Posted on Sep 25, 2009
Testimonial: "Awesome. Thanks."
ECOTec 2.4 Liter engine (and all ECOTec engine blocks in 4 cylinder sizes) have a cartridge type oil filter housing on the front of the block, driver's side of the vehicle.
The cap must be removed with a wrench, and the filter pulled out, then the new one put in. Now is usually a good time to replace the O-ring on the cap.
Posted on Dec 27, 2009
The Intake Air Temperature (IAT) sensor determines the air temperature
inside the intake manifold. Resistance changes in response to the
ambient air temperature. The sensor has a negative temperature
coefficient. As the temperature of the sensor rises the resistance
across the sensor decreases. This provides a signal to the PCM
indicating the temperature of the incoming air charge. This sensor helps
the PCM to determine spark timing and air/fuel ratio. Information from
this sensor is added to the pressure sensor information to calculate the
air mass being sent to the cylinders. The IAT is a two wire sensor, a
5-volt reference signal is sent to the sensor and the signal return is
based upon the change in the measured resistance due to temperature.
Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine
Posted on Apr 11, 2010
Tips for a great answer:
Jul 31, 2014 | 1998 Chevrolet Cavalier
Mar 16, 2013 | 1998 Chevrolet Cavalier
Nov 06, 2012 | Cars & Trucks
Aug 30, 2011 | 2005 Chevrolet Cavalier
Jul 02, 2011 | 1996 Chevrolet Cavalier
Mar 30, 2011 | 2002 Chevrolet Cavalier Coupe
Feb 16, 2010 | Chevrolet Cavalier Cars & Trucks
Jul 27, 2008 | 1998 Chevrolet Cavalier
70 people viewed this question
Usually answered in minutes!