Question about Cars & Trucks

Open Question

How to set the cam belt timing on renault kango 1.4i 8v

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: timing belt settings

the tension setting for the belt?

or the timing marks? the timing marks differ. best set cyl. no 1 to tdc.. take out no. 1 spark plug and put sumthin long and thin down the hole.. like a long quarter drive extension.. and check to see that cyl 1 is at tdc.. then set your cam to the OT marks marked on the cam pulley and rocker cover... then you have to set the distributor also.. slacken the 13mm bolt for the dizzy clamp... you will find a line on the lip of the dizzy body.. this needs to align with the middle of rotor arm tip... (sumtimes a mark on the roror arm tip)... tension belt and your timing is set.. set your timing incorrectly and the car will run rough and not rev past 5k...

Posted on May 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Its in perfect time it gets fuel and fire but wont start what can i do


Try checking your timing belt. If the valves are not in time with the pistons it will not run.

May 20, 2015 | 1994 Geo Tracker

1 Answer

1.6 LITER TIMING MARKS


g16a or b
the cam cog mark is at 12pm matching the same mark
at the back 12pm tins at rear of cam cog.
this mark is TDC #4 firing, number four.
pick 8v or 16v engine.
http://www.fixkick.com/t-belt/tbelt-index.html#Tbelt-main

documented 3 ways, by page new page, by FSM and by instruction sheet that came with all new belts (GATES)

the cam cog has 2 false marks, do no use them
use all E marks. 16v and see 8v for its false marks too.
1995 had 2 engines, 2 EFI and 2 heads. as an option.
fact. G16A or B.

Jun 29, 2014 | 1995 Suzuki Sidekick

1 Answer

How to replace front cam shaft seal in Geo Tracker,1.6 liter engine


remove tbelt (lots of steps see link)
remove front cog on cable( 8v head is diffr that 16v to lock it)
tell if 8v or 16v engine
then remove backing plate.
then the seal clamp.
the seals falls off.
reverse above
http://www.fixkick.com/t-belt/tbelt-index.html

there are links to the real FSM pages to, this page covers
every type of cam cog /belt failure there is.

or at head pulls seen here with skips
http://www.fixkick.com/engine/head-pull/head-pull.html
or hear start at step 8 to 12
then do step 14
then jump to 32. and stop
the cam cog bolt is RHT that is CCW takes it off
then remove the backpan , 10mmbolts and last the
seal clamp.

in short, all belts off, fan blade off.
timing cover (tbelt) off
timing belt idler stud and idler center bolt loose.
timing belt off
top cog bolt off (use locking method) ask)
backpan off
seal clamp off.

see how to time a cam , in link 1 above.

Jan 07, 2013 | 1994 Geo Tracker

1 Answer

Cam timing marks renault kangoo diesel


plz advise how to set timing for renault kango 65 diesel,has elecric injector pump

Apr 27, 2012 | 2006 Renault Kangoo 1.5

1 Answer

2000 renault clio 1.9Dti si timing setting on cam belt


hi from the uk i can scan and e mail you the full instructions and diagram ofbelt timing+marks for alignment plus correct tensioner setting if you send me your e mail address ? best wishes from n/west uk

Nov 25, 2009 | 2000 Renault 181

3 Answers

RENAULT CLIO 8 VALVE TIMING BELT SNAPPED WHERE DO I FIND THE TIMING MARKS? HOW DO I SET THE TIMING UP . IS THERE A DIAGRAM ANYWHERE ? WILL IT BEND THE VALVES ? THANKS


hallo
first let me know year, engine code (or at least typ of engine 1.2, 1.4...). and I will send you picture for timing belt.
and it will (did) bend valves, so you`ll have to remove cilinder head *** well.

Marko

Nov 21, 2009 | 1986 Renault Sport

1 Answer

Problem restarting my 1.6 ,8v-(1999) renault clio.


If engine will not turn over after head refit,make sure all timing marks are aligned when timing belt was refitted.If it will not turn over using socket/spanner on crank ,then thats the problem.

Nov 06, 2009 | 2000 Renault 181

1 Answer

Renault laguna 1.9 valve change


If the cam belt popped you may not need to pull the head.. See if all you valves come to full height when you turn the cam with a wrench. If they do, you lucked out and none are bent. Change the timing belt and rotate the crank and cam together once everything is in time, and if you can, do a compression test. That will expose any bent vales. If you have compression. recheck your timing belt settings and button it up. Good Luck, Ned

Sep 13, 2009 | Renault Sportwagon Cars & Trucks

1 Answer

Heater blowing cold air on renault kango 1.2


check and see if the heater tap is opening this is the only thing thst will cause the problem. Lindz

Mar 29, 2009 | 2006 Renault 181

1 Answer

Timing belt settings


the tension setting for the belt?

or the timing marks? the timing marks differ. best set cyl. no 1 to tdc.. take out no. 1 spark plug and put sumthin long and thin down the hole.. like a long quarter drive extension.. and check to see that cyl 1 is at tdc.. then set your cam to the OT marks marked on the cam pulley and rocker cover... then you have to set the distributor also.. slacken the 13mm bolt for the dizzy clamp... you will find a line on the lip of the dizzy body.. this needs to align with the middle of rotor arm tip... (sumtimes a mark on the roror arm tip)... tension belt and your timing is set.. set your timing incorrectly and the car will run rough and not rev past 5k...

Sep 26, 2008 | 1993 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...