Question about Cars & Trucks
Replaced door wiring
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ford mondeo mk2 wiring
The easiest option is to purchase a HAYNES WORKSHOP MANUAL.
where there are all the wiring diagrams in the rear (Available on Ebay etc)
If you have a particular Mondeo problem, then this free site can be very useful
Posted on Sep 12, 2009
Is it remote locking? if so push hard against the door while the boot handle is in the open position and then pull hard towards you, they sometimes stick on the latch so you need to work it back and forth to free it off, if you can get to the mechanism through the back seat spray all aropund the inside of the lock with wd40 this should help free it off. Also while you are pushing and pulling get someone to lock and unlock the car repeatedly with the remote and the key.
Ther is a very small latch on the boot lock they get jammed when the weather turns cold, when you get it open try and get some copper grease and apply it to prevent it from heppening again.
If you still cannot get it open after this please get back to me for more info.
Posted on Feb 08, 2010
use a test meter to locate the cars wiring thats the easy part and make sure the ground or earth connection has more than one connection ,use the towbat bolt fittings and the back light cluster earth ,Also make sure that the laws in your country allow you to fit it yourself as all europeon states now require this work to be carried out only by a certified garage with the vehicle presented to a inspection station with the certificate of conformity and homoglonation for the hitch and the certificate of fiting signed and stamped by a auto electrician and the garage that fitted it ,as you are not allowed to fit this sort of thing yourself then it has to be added to the vehicles paperwork at the inspection station where the vehicle has to have another yearly inspection as to weither the old one has expired or not .-you have been warned
Posted on Feb 29, 2012
Tips for a great answer:
Feb 05, 2016 | 2011 Ford Galaxy 2.0
Jun 03, 2015 | Ford Cars & Trucks
Mar 01, 2015 | 1999 Ford Mondeo
Feb 25, 2015 | 2005 Ford Focus
May 29, 2013 | Ford Cars & Trucks
Feb 29, 2012 | Cars & Trucks
Jun 07, 2011 | Ford Mustang Cars & Trucks
Feb 28, 2010 | 1992 Ford Escort 4 Door
Apr 07, 2009 | 1997 Ford Taurus
23 people viewed this question
Usually answered in minutes!