Question about Cars & Trucks

Open Question

Sea leon cupra r rear springs

I found out yesterday when i jacked my car up that my spring was in three peices ineed to no how put a new spring in eg what to take off undo ect

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 22 Answers

SOURCE: AIR SUPERISON RIDE AIR BAGS REAR

Strutmasters.com
They have the conversion kit.
Lincolns with air suspension can be converted over to springs.

Posted on Nov 23, 2008

  • 337 Answers

SOURCE: Rear leaf spring

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800681b1

Posted on Dec 20, 2008

CHA55Y
  • 13 Answers

SOURCE: How do I fit coil over rear springs on VW Golf mk4

first you can loosen the top strut nuts, they are accesses from the boot and the bolt tops may have an allen key top you can use to stop the piston spinning, then you will need to jack up back of car, one side at a time, unbolt bottom of existing shocks, place new ones inplace but bolt tops in first, if they dont fit as too long to get into the bottom bolt holes, try jacking the car as high as possible and get a friend to slowly but firmly push down on the rear wheel, (btw you do this with the wheels on, just as easy as off) and with that extra clearance you should get em in.. or there are spring compressors but I doubt they will be needed, or even possible on "in car mounted" springs.. goodluck, there are also several articles on vwwatercooled.org.au, checkit!! :) Chas

Posted on Jun 08, 2009

  • 1596 Answers

SOURCE: broken rear coil springs

You Need A STRUT TOOL to Compress Springs For Instalation onto Strut Assembly. With STRUT OUT Of Vehicle

Posted on Aug 07, 2009

  • 497 Answers

SOURCE: 1995 Buick Regal Rear Leaf Spring Insulator Kit -

the job is extremely hard unless you have all the tools and a hydraulic lift like all mechanic shops. the insulator should work. the springs do need removal to install the insulator kit. Find a good mechanic.

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the leaf springs on my 1978 ford f100


Jack the vehicle up and place on jack stands. Remove the rear wheels. Remove the large u bolts holding the springs to the axle. support the axle with a jack. Do 1 side at a time. Now unbolt the springs at either end. Remove and install the new spring

May 18, 2014 | Ford Cars & Trucks

1 Answer

Seat leon cupra 1.8 20vt orange oil is on constantly


my seat leon seems to burning oil im having to put oil in regular had a new turbo fitted any other suggestions please

May 27, 2012 | 2000 Seat Leon

1 Answer

How to change stuts


  • Rent a spring compressor before you start removing the old struts and putting on the new ones. You can rent a spring compressor at any auto store. You can also buy one, but if you are only going to use the compressor once, it's best to simply rent it. Jack up the car and remove the tire. Then place one jack stand on the side you are working on.
  • 2 Loosen the two lower bolts that hold the brake line to the strut you want to remove. Remove the cap covering the top of the strut, and while holding the coil over the strut, remove three nuts. Pull out the cover to the strut assembly.
  • 3 Tighten the spring using the spring compressor and remove the nut at the top of the strut. Decompress the spring, and the strut will be freed from the spring. Remove the front strut.
  • 4 Put in the new strut and bolt it back up. Replace the tire. You now have the old strut removed and the new one in place.
  • 5 Repeat Steps 1 through 4 when removing and replacing the rear strut.

  • I hope this helps!!! Thanks!!!

    Oct 06, 2010 | 1994 Cadillac Eldorado

    1 Answer

    Leaf spring replacement


    Yes but you need two thumbs. Jack the truck and support it on the frame ahead of the axel so the axel can hang on its own weight. Remove the bolts and mount to the bad spring - remove the axel mount first, Let the axel sag and put something under the tire to help hold it. Remove the spring mount bolts to the frame and lower the spring out the rear. reinstall is the reverse --- BUT --- the new spring may not fit right in the spring mounts. Mount the front bolt first and then the rear - you may have to use a pry-bar and force the spring into the rear mount.

    May 08, 2010 | 1997 Nissan Pickup

    1 Answer

    How do u remove the rear overload spring on a silverado 1500


    go and get some new center pins for the rear leaf springs 4wd stores always have them for around $10, take a jack and jack ther rear of the truck up remove the u bolts on one side of the axle, unsrew the center pin or cut it of, remove the overload spring replace the center pin with new ones reinstall the u bolts and move to the other side

    Oct 02, 2009 | 1999 Chevrolet Silverado 1500

    3 Answers

    Rear springs replacement


    You will need a spring compressor first of all. You have to remove strut, compress sring to get cartridge and spring apart and then replace new spring on strut and replace into vehicle. This is a nasty job without a hoist

    Sep 24, 2009 | 1996 Pontiac Grand Am

    1 Answer

    Installing rear shocks/struts for 03 pontiac vibe is this a DIY


    Your going to need a impack gun, various sucket and a spring compressor. 
    Need to jack up the car and remove wheels. Re-move two lower bolts Re-move three upper strut mounts Re-move rear Rear strut assembly
    Now the hard part Compress the springs Remove the strut nut holding the strut mount. note replace these with new ones. Take the springs out and replace the sturt.
    Follow procedure in revers and have a friend to help.  Good luck and hope this helps

    Apr 09, 2009 | 2003 Pontiac Vibe

    2 Answers

    Instaling new shocks on a 2000 s-10 blazer vortec v-6


    for struts on front you definately need quality spring compressor to disassemble and remmove strut cartridge from inside return spring...be Very careful!!!!

    Dec 17, 2008 | 2000 Chevrolet Blazer

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    14 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...