Question about Cars & Trucks

Open Question

126-4 f-can vsa/pcm - Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pcm is not communicating with abs car is in limp mode can't get it resolved


Check the ABS fuses. Check the ground for the ABS. What are the codes?

Feb 07, 2016 | 2005 Acura TL

2 Answers

I have Acrua TLS 2003 the VSA Light is on what does that mean


VSA is vehicle stability assist. I don't know whether light indicates vsa is on or faulty.

Jun 17, 2015 | Acura TL Cars & Trucks

3 Answers

My 2008 Honda accord is displaying an explanation point on dash what does it mean


If the explanation point is inside of what looks like a tire. Tire Pressure Monitor System. Inflate your tires to the correct pressure (probably 32psi) Or could be an issue with you TPMS

Jul 28, 2014 | Cars & Trucks

1 Answer

How do you reset the vsa light on 01 acura CL type S?


of vsa is user disable-able at all. it's stated so in the users manual
did you look there first?
lost it?

Jul 15, 2014 | 2001 Acura 3.2CL

1 Answer

2008 Honda Ridgeline VSA warning light


I have a 2014 Ridgeline SE with 8,900 miles.
Says low brake oil but it's full, and VSA is messed up.
I say it's a VSA computer program problem.

Mar 09, 2013 | Cars & Trucks

2 Answers

VSA shows on my dash and the vehicle seems to remain in the same gear. It can't accelerate after the car has been slowed down. The error message can only be reset when the engine is switched off...


"VSA" stands for "Vehicle Stability Assist". This system has four indicators: The ABS indicator, the VSA indicator, the VSA activation indicator and the Brake System indicator.
When the system detects a malfunction, it illuminates the appropriate indicators. Depending on the failure, it determines which indicators to illuminate.
These lights illuminating do not necessarily indicate a failure in the VSA system itself. The VSA is only PART of the computer network in your vehicle. Information is shared among several control units. Certain malfunctions in the engine control or transmission control systems can cause the VSA to be disabled and the warning lamps will illuminate.
The only way to determine the cause of the problem with your vehicle is to perform a computer network scan to find out the nature of the failure and which control module requested the VSA to be disabled.

Apr 13, 2012 | 2004 Acura MDX

1 Answer

My vsa system indicator and vsa activation indicator light came on and it will not go off even when I turn off and on my honda- what does that mean?


It's hard to said what it is without a VSA code, but the VSA system monitor the rotation of you tires. Check and make sure you have the same tire size for all four tires. If the tires are not spinning at the same ratio could cause the VSA light to come. It could be a bad sensor or even the VSA modulator itself. It's hard to said. Good luck

Dec 15, 2010 | Honda Odyssey Cars & Trucks

2 Answers

2006 Honda crv, vsa, abs, and triangle light are permanently on


You are talking about the VSA activation indicator (triangle with exclamation point in the middle):
This indicator has three functions:

It comes on as a reminder that you have turned off the vehicle stability assist (VSA) system.

It flashes when VSA is active.

It comes on along with the VSA system indicator (the rectangle with VSA in it) if there is a problem with the VSA system.

This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position, and when the ignition switch is turned to the START (III) position.

Hope this helps you understand the problem.

Dec 09, 2009 | 2006 Honda CR-V

1 Answer

What does a flashing orange triangle mean on a 2006 crv


If you are talking about the VSA activation indicator (triangle with exclamation point in the middle):
This indicator has three functions:

It comes on as a reminder that you have turned off the vehicle stability assist (VSA) system.

It flashes when VSA is active.

It comes on along with the VSA system indicator (the rectangle with VSA in it) if there is a problem with the VSA system.

This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position, and when the ignition switch is turned to the START (III) position.

Hope this answers your question.

Dec 09, 2009 | 2007 Honda CR-V

1 Answer

Can you bypass the govonor on a 98 grand prix gt. heard of a trick to confuse computer but dont know if it works


Hello! I think what you are referring to is the speed limiter - which on your car is 108 MPH, and on the GTP it is 126. This is a setting that electronically controlled within the PCM, and the only way it can be modified is to have it reprogrammed, or to purchase an aftermarket, modified PCM.


Hope this helps! Thanks for using FixYa!

Oct 02, 2009 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...