Question about Ford Expedition

Open Question

Broken speaker wire

The stereo wire that leads through the in the rubber sleeve

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stereo


pull the rubber boot back off the wiring harness in the crease of the drivers door and check for broken wires there. common problem due to the number of times these wires flex to allow the door to open and close

Sep 21, 2012 | 1996 Jeep Grand Cherokee

2 Answers

Wat do all the wire cables mean at the back of the stereo? e.g.- brown, white/purple.


Car Radio Constant 12V+ Wire: Red/White
Car Radio Switched 12V+ Wire: Purple/White
Car Radio Ground Wire: Brown
Car Radio Antenna Trigger: White
Left Front Speaker Wire (+): Yellow/Red
Left Front Speaker Wire (-): Brown/Orange
Right Front Speaker Wire (+): Black/Red
Right Front Speaker Wire (-): Brown/Orange
Left Rear Speaker Wire (+): Yellow/Black
Left Rear Speaker Wire (-): Black/Orange
Right Rear Speaker Wire (+): Blue/Black
Right Rear Speaker Wire (-): Brown/Orange

Apr 18, 2011 | 1993 BMW 7 Series

1 Answer

Im trying to wire my radio but i cant find a diagram what color is the hot wire and what colors are the speaker wires


Hi, use the white (orange stripe) accessory wire to power the radio. The red (black stripe) wire is the hot lead used to maintain clock and preset stations for the head unit. The complete factory harness color code is below. Please let me know if you have any questions and thanks for using FixYa.

2006 Mitsubishi Raider Car Audio Wiring Schematic
Car Radio Battery Constant 12v+ Wire: Red/Black
Car Radio Accessory Switched 12v+ Wire: White/Orange and White (This vehicle uses the can data network for accessory turn on.)
Car Radio Ground Wire: Black
Car Radio Illumination Wire: N/A
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: White/Orange and White (This vehicle uses the can data network for amplifier turn on.)
Car Stereo Amplifier Location: Amplifier is located in the passenger kick panel.
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): N/A
Left Front Speaker Negative Wire (-): N/A
Right Front Speaker Positive Wire (+):
Right Front Speaker Negative Wire (-):
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Dark Green/Dark Blue
Left Rear Speaker Negative Wire (-): Dark Green/Orange
Right Rear Speaker Positive Wire (+): Gray/Dark Blue
Right Rear Speaker Negative Wire (-): Gray/Dark Blue

Jan 30, 2011 | 2006 Mitsubishi Raider

2 Answers

Which 2 wiers are the power wiers to the car radio


Hello ruben
These color codes are for the factory radio harness. there are 3 +power wires if you have a pwr antenna, this wire is pink. The ign/acc +pwr. wire is blue with black stripe, the radio memory +pwr.
wire is orange with a black stripe. Hope this helps.

Dec 06, 2010 | 2002 Hyundai Accent

1 Answer

I need an audio wiring schematic for 2002 yukon, or lead me to where i can find it. Thanks


2002 GMC Yukon Car Stereo Wiring Guide
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

rate pls

Feb 26, 2010 | 2002 GMC Yukon XL

3 Answers

Speaker wire colors


1991 Ford Explorer XLT Radio and Speaker Wire Colors
Pulled out the stock radio and found two plugs on the back of it. One plug had 7 wires (Power, Dimmer, Amp etc.) and one had 8 (Speakers).
7 wire plug (I could see these wires immediately from the plug):
Car Radio Battery Constant 12v+ wire = Light Green w/ Yellow Stripe
Car Radio Ground Wire = Black
Car Radio Accessory Switched 12v+ wire = Yellow w/ Black Stripe
Car Radio Dimmer Wire = Light Blue w/ Red Stripe
Car Radio Illumination Wire = Orange w/ Black Stripe
?? Don't know ?? Red Wire (No power to wire Constant or Accessory)
Car Radio Amp Wire = Blue
8 Wire Plug (Wires were wrapped in a grey outer sleeve, had to cut sleeve to get to wires.):
Right Front:
White w/ Green Stripe (+)
Brown (no stripe) (-)
Right Rear:
Purple w/ White Stripe (+)
Light Blue (no stripe) (-)
Left Front:
Light Green (no stripe) (+)
White w/ Orange Stripe (-)
Left Rear:
Light Blue w/ Black Stripe (+)
Yellow (no stripe) (-)
Speaker Wires (found at the individual speakers in the doors)
Right Front:
White w/ Green Stripe (+)
Green w/ Orange Stripe (-)
Right Rear:
Orange w/ Red Stripe (+)
Black w/ White Stripe (-)
Left Front:
Orange w/ Green Stripe (+)
Blue w/ White Stripe (-)
Left Rear:
Red w/ Green Stripe (+)
Red w/ Blue Stripe (-)

Aug 10, 2009 | 1991 Ford Tempo 4 Door

1 Answer

I have a sony car stereo that was given to and I lost the manual to wire it and don't want to take a chance and blow it


How to set up radio without wiring diagram : First you need to hook up the lead and ground power wire to your radio.(the lead usually has a line all the way down it). Turn power on to the radio and switch to am/fm. Locate any lead speaker wire and connect it to front right -. Then take all ground speaker wires one by one and touch them to front right +. As soon as you hear a sound, find out which speaker it is coming from, as soon as you have identified correct speaker remove wires from right speaker and mark them carefully. Do this with the rest of speaker lead wires an speaker ground wires and you will be able to connect your stereo.

Jun 18, 2009 | 2005 Chevrolet Silverado 1500HD

1 Answer

I removed my stereo for my 86 bmw 325 and now i am lost with the wiring.where do i start?


How to set up radio without wiring diagram : First you need to hook up the lead and ground power wire to your radio.(the lead usually has a line all the way down it). Turn power on to the radio and switch to am/fm. Locate any lead speaker wire and connect it to front right -. Then take all ground speaker wires one by one and touch them to front right +. As soon as you hear a sound, find out which speaker it is coming from, as soon as you have identified correct speaker remove wires from right speaker and mark them carefully. Do this with the rest of speaker lead wires an speaker ground wires and you will be able to connect your stereo.

Jun 16, 2009 | 1986 BMW 3 Series

1 Answer

I need radio wiring diagram for 2004 honda civic sedan and instructions on how to remove the radio


I just installed a radio and speakers in my 1992 Civic LX (132323 miles). Most radios are removed by disassembling some of the dashboard components. On mine I had to remove the lower center console (where the ashtray/lighter is located) to access the rear of my old radio. There is a metal support strap back there which stabilizes the radio and provides equipment grounding. This has to be removed from the radio before you can un-install the radio. Also there may be a metal mounting sleeve around the radio, if so you must use (2) thin metal strips (or thin screwdrivers)to disengage the (2) side clips from the sleeve. You should then be able to remove your old radio.
As for wiring , I had to discard the wire harness the came from the old stereo and hard wire the new unit. I used a 12v circuit tester to find my (+) positive (typically red) and (-) negative (typically black) leads. Speaker wires are in pairs. (example: blue/white white/blue or white/white-black)

Oct 29, 2008 | 1992 Honda Civic

3 Answers

Audi a4 1.8t windows, interior light wing mirrors not working


Folks, Just found my problem ...... There's a flexible conduit (corrugated rubber sleeve) between the driver's door and the door arch which contains the wiring loom for the drivers door central locking/door speaker/electric windows/mirrors etc....discovered when I slipped off the sleeve that 4 cables in the wiring loom had broken due to repeated flexing when drivers door was opened/closed over the years (2001 Audi A4). Resoldered broken wires and insulated same....now working better than ever again ...ie dashboard back lighting seems brighter than it had been for some time? Also drivers door loudspeaker is back in action again (hadn't noticed that it had gone).
It's kinda difficult to reseat the rubber sleeving correctly after the repair job...will probably use some silicone sealant on the sleeve to ensure that there is no water ingress to wiring loom afterwards. I'm not too impressed with Audi design people after that, should have used cable that has a better flexibility rating (esp on drivers door!).

Paul.

Sep 24, 2008 | 2004 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...