Question about GMC Yukon Denali
HVAC Vent Motor behind dash,the one
called cabin vent
Blend Door Motor if you like that term
Posted on Jul 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dash vents will not blow air
It may be the mode actuator. Have you heard any clicking or other strange noise ? Under the drivers rear seat, in a plastic box is a fuse panel. Remove the two retainers, and the cover. Remove the HVAC or A/C fuse for a minute or two. Reinstall the fuse and this will make the A/C system relearn. Whwn you put the fuses back do not touch the A/C controls. Start the truck and leave it run for two or three minutes. Then try to change the vent from floor to vent and defrost. If this does not work you will need a mode motor. Good Luck
Posted on May 22, 2009
SOURCE: There is no air flow
You need part GM Part number 89018675 or ACDelco 15-73596. The Mode Selector Actuator. What happens is the part is a CHEAP part POORLY designed and when it goes to turn the flaps inside the HVAC unit its the plastic gear slips instead of turning the flap!!!
Just to forward you you might want a deal to install this art for you unless your good at fixing your own vehicle, because you need SMALL sockets and a lot of patience to get this part in!!!
The part is ALMOST directly above the steering shaft for your steering wheel, so theres a lot you got to remove before you will even see them!!!
I only recommend you to have a dealer put this part in for you, unless you have your own service manual!!
Because there is 5 of these darn things and if you pick the wrong one you will have to do it all over again!!!
3 on the Drivers side and 2 on the Passengers side!!
But replacing this part SHOULD solve all your problems!! AS it did for me and i was having the same issues as you have described!!
Posted on Jul 22, 2008
common problem, check under dash by the gas pedal if control arms are muving went selecting from ac to heat cuz this it is the control for the vents to go from ac to heat and to defrost.
Posted on Feb 23, 2009
Some thing you could look at would be this. The control is usually fed by a vacuum line or small hose thats is connected to your intake manifold.
With a cold engine,look for a skinny vacuum hose that runs from the intake toward the fire wall . It should be going inside the cab and connecting to the A/C vent control.Some times the hose becomes disconnected or splits or cracks due to heat under the hood.
Thats usually the trouble.
I hope this helps you.
Posted on Oct 06, 2009
Tips for a great answer:
Jul 26, 2014 | 1980 Chevrolet Corvette
Jun 17, 2013 | 2001 Hyundai Elantra
Sep 26, 2012 | 2006 Nissan Titan
Jun 28, 2012 | Chrysler Town & Country Cars & Trucks
Apr 04, 2012 | 2003 Chevrolet Cavalier
May 23, 2009 | 2004 GMC Envoy
Jan 18, 2009 | 1997 Chevrolet K1500
Dec 05, 2008 | 1993 Chevrolet Corsica
133 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: