Question about Cars & Trucks
The power doors locks do not work on the sliding doors
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Kia Door Handle
Remove the door trim inside by loosen 3 bolt with screw driver, then pull out the door trim, after that loosen the hex.bolt (3 hex-bolt) on lock mechanism bracket, after that you can loose bolt (4 hex bolt) on handle cover. Be careful to not drop the bolt, because the gap on sliding door is too narrow. After you removing the handle assembly you can see where is the broken. You can remove the handle from cover by removing pin clips on it. To fixing the broken handle you can just using plastic glue or you can drill a small hole and put some small wire to reinforce the plastic.
Posted on Nov 28, 2008
i have replaced many sliding door lock actuators on these vehicles..dealer part..mostly on passenger side sliding door..also possible you have a broken wire in door track harness..follow wiring from door into what looks like a plastic chain in door track at door opening
Posted on May 14, 2009
I just had mine fixed at the dealer for the same problem. Their first response to me was "this happens ALL THE TIME". He said there is a little plastic pin in the door handle assembly and the pin has been known to slip out of the assembly. However, when they got inside, they said it was the actual door handle (inside) that was broken and had to replace the whole piece. So, the first step according to my dealer/servicer would be to check for the little plastic pin.
Posted on Jul 10, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to remove the bolts securing the outer handle on
Posted on Sep 15, 2009
Tips for a great answer:
Mar 15, 2015 | 2004 Kia Sedona
Jan 01, 2015 | Kia Cars & Trucks
Sep 21, 2014 | 2004 Kia Sedona
Feb 25, 2012 | 2005 Kia Sedona EX
Dec 26, 2009 | 2007 Kia Sedona LX Minivan
Dec 10, 2009 | 2004 Kia Sedona
Oct 29, 2009 | 2007 Kia Sedona LX Minivan
Mar 17, 2009 | 2003 Kia Sedona
112 people viewed this question
Usually answered in minutes!