Question about Cars & Trucks

1 Answer

How to check front brakes on 1500

When I apply the rear brake pedal, there seems to a little rubbing (but not quite grinding noise) coming from the front brake. it's most noticable a very low speeds (even with motor off). The wheel is smooth. The brakes (both front & rear) work good. But what is that noise? Also, how do I check the front bearings? How & where do i grease the bike? (Where r the grease nipples?) Lots of questions for you. I hope I get lots of good answers! Thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,799 Answers

To check the wheel bearings you should put the bike on the mainstand and grasp the wheel at 3 and 9 o'clock, then give it a wiggle then do the same at 12 and 6 o'clock. This will show up any play in the bearings. Just an aside- it will help in the future if you ask the question in the correct section and give details of the make and model of the bike.

Posted on Jul 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2006 f-250, i have a grinding noise that sounds like it is coming from the rear wheels, but when i apply the brakes it stops.


How To replace front Brake Pads. In 90% of the car manufacturers the job will be done the same way. This is F250 Ford 2006

Jul 26, 2014 | 2003 Ford F250

1 Answer

New brakes and rotors still makes a grinding noise


If you have eliminated the noise coming fom the rear brakes, then the sound in front could be the wheel hub or bearings. When the brakes work, there is a certain amount of centering that happens when the brakes grab the rotor. Also, it puts stress on the CV joint to have Brakes on one side and Transmission Torque on the other.

You need someone to check these 2 items for roughness.

Mar 11, 2013 | Cars & Trucks

1 Answer

Noise from rear-end on jeep chrokee


Did you check the fluid level in the rear end?

Jun 27, 2017 | 1998 Jeep Grand Cherokee

2 Answers

Grinding noise from rear. Brake pads? Bearing maybe? Seems to be coming from the passenger side rear wheel area. Any help would be great. Thanks.


Have the rear brakes inspected. These are real easy to change if they need to be. You need to look under the car just outside the differential. This is an inboard brake system so the wheels don't need to be removed.

Feb 24, 2010 | 1986 Jaguar XJSC

1 Answer

Grinding noise front end.


I say it's the CV joints. You have to jack up under the lower A-Arm, to take the spring pressure off of it, to check them.

(Use jack stands, and wheel chocks behind the rear tires. Emergency brake On. Work on a hard level surface. Be SAFE! Trucks can be replaced, YOU cannot!)

Jul 26, 2009 | 2003 Chevrolet Silverado 2500HD

2 Answers

Brake pedal vibrates while braking and doesent stop right away


There's speed sensors at each wheel. You may have got some contamination in front of one of them... sounds like the abs is trying to compensate for un equal speed at each wheel... and something may be blocking a proper read at one of the wheels...

Jul 23, 2009 | 2002 GMC Sierra 1500

2 Answers

96 Ranger Grinding Sound Moving Forward


Did you check the rotors to see if they were cracked or 'thin' ? Rotors sometimes get really thin with use.And they can crack. Or as in one case that I know of there was sand between the rotor and the pads. The pads were also new. Removed the gravelly sand and they worked fine.

Nov 05, 2008 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...