Question about Cars & Trucks

1 Answer

98 vz800 fouls plug cobra ex - Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,122 Answers

Hi Donald, Make sure the heat range of the plugs you're using is correct as the first step. If they are correct, suspect worn injectors, worn piston rings or valve stem oil seals. Regards John

Posted on Jul 21, 2013

  • donald Jul 21, 2013

    Ya john just use what book said should i gap them a little more or stay factory

  • I think the factory knows best. Usually a new plug is gapped at about 0.90 mm and reused is set at 1.00 mm. Regards Johna

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 19-98 chevy astro van with a 4.3 vortec eng.it is flooding what causes that?


Injectors stuck open. Spark plugs worn out. Since it is already flooding, the plugs are gas fouled. Need to replace them first.

Nov 12, 2016 | Cars & Trucks

1 Answer

1999 EX. Why is it hard to start?


Possibly dead battery.
Possibly out of gas
Possibly fouled spark plugs
Possibly almost everything.

If you were to give us some symptoms we might possibly be able to offer possible problems with solutions.

Aug 24, 2015 | Honda Accord Cars & Trucks

1 Answer

1999 civic ex replaced waterpump, now hard start, smoke, and whining sound on acceleration and wants to die


Here's a link to changing your water pump,do you have the timing set correct,sounds as it's not.Your spark plugs may be fouled,check and see what they look like,if it's fouled,gas on them,then timing needs to be reset. SAVE 20 GET BONUS 10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

Feb 19, 2015 | 1999 Honda Civic

1 Answer

98 chevy malibu 2.4 fouling spark plugs


change plugs, and use a good brand of plug. like ngk. they cost more but they run better. or replace with manufacturers brand for your engine. good day !

Jun 22, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

What does a codec: PO302 mean for a kia sedona EX 2003?


P0302 indicates a Misfire in Cylinder #2. Possible causes are as follows:
  1. Possible dirty fuel injector
  2. fouled spark plugs
  3. faulty spark plug wires
  4. compression problem (bad cylinder or head)
I hope this clarifies your issue and answers your question. Thank you for using Fixya!
Greg

Feb 19, 2011 | 2003 Kia Sedona

2 Answers

What other engine will fit a 97 civic ex?


The 96-98 Civic EX came with an OBD2A D16Y8 engine. That is the only engine that will go in as a direct replacement with your current engine ECU. It's an SOHC VTEC engine that has two extra connections not found on the other 96-98 Civic engines - a VTEC solenoid and a special oil sensor used to determine if VTEC engagement is possible. If you swap in an older Civic engine (92-95 generation) you'll have to convert the car to OBD1 (requires a special adapter hardness) and run the ECU that goes with whatever engine you use. This will break functionality of your OBD2 diagnostics port, and depending on which state you live in will cause you to fail emissions checks. If you install a D16Y8 engine from a 99-00 Civic EX, you will have to swap the intake and exhaust manifolds from your old engine to the new engine, and you will be able to continue to run your existing OBD2A wiring and ECU. The 99-00 Civic EX engines have additional sensors, since those engines are OBD2B. The easiest fix would be to find a SOHC VTEC D16Y8 from a 96-98 Civic EX, as it would be a direct plug and play replacement.

Apr 16, 2010 | 1997 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...