Question about Cars & Trucks
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: LOCATION OF CABIN FILTER
If you release the holders on the sides of the glovebox (when it is open) the glovebox will hang down, and you will see a removable black panel behind the glovebox...remove that panel, and the cabin filter will be behind it.
Posted on Dec 19, 2008
SOURCE: cabin filter element location
Filter is located behind the glove box. All you need is a screwdriver to replace.
1. Open the glove box and empty to take the weight off the box.
2. On the right side there is a plastic hinge like device held on by one Phillips head screw. If you have trouble removing with a Phillips screwdriver you can remove with a narrow flat head screwdriver. Remove the screw and slide hinge off the mount.
3. To drop the glove box press the sides slightly inwards while 'forcing' it open beyond it's normal stopping point. Careful as when it releases it will fall wide open and may even fall from its hinged area. Set it aside.
4. Behind the glove box there is probably some fiberous material inserted to prevent noise like squeaking when it rubs. It is sticky on one side to hold it in place. Just remove and place out of the way.
5. Behind the fiberous material there'll be a cover which kinda looks like a grille. Mine was white and it is in the center of the opening. Remove it by releasing the clips at the left or right. It comes right out.
6. When the cover comes off slide the filter out and replace it. The filter lays flat and just slides in and out easily. However, if it has been some time since you replaced be prepared for a lot of debris on top of the filter such as leaves, grass or other general type of debris that has been sucked into the filter. It also may be the source of any bad odors that you smell through the air conditioning system.
7. Reverse the process. Replace the cover and push the glove box lid back into place. When you replace the glove box be careful to make sure the hinge you initiallly removed the screw from is not left behind the glove box or you will have to remove again to get it out. Replace the screw and do not over tighten as it screws into plastic and then your done.
Posted on May 07, 2009
SOURCE: cabin air filter, location
It's located on the engine compartment firewall, passenger-side. Open
the hood, stand by the right front wheel and you'll see the fasteners
to remove forward of the wipers. Fasteners are removed by pushing the
center in, then pulling them out. To replace. pull the center out,
replace it, then push it flush to lock.
Good luck and hope this helps.
Posted on Dec 14, 2009
SOURCE: lincoln continental cabin filter
I solved the problem by ordering the filter fro an online site that gave instructions:
instructions at this link are:
Turn on wipers until they are in an upright position then turn ignition off. Open the hood. The filter compartment is on the passenger side, directly beneath the windshield. Pull back weather strip and remove cowl. Slide the water shield toward the front of the vehicle then lift to remove. Replace filter and reassemble.
I have it out and am waiting for new filter.
Posted on Jan 10, 2010
Tips for a great answer:
Dec 22, 2016 | Lincoln Cars & Trucks
Jun 09, 2015 | 2006 Lincoln Mark LT
May 07, 2014 | 2006 Lincoln Mark LT
Aug 31, 2010 | 2006 Lincoln Navigator
Jul 21, 2010 | 2006 Lincoln Mark LT
Feb 06, 2010 | 2006 Lincoln Mark LT
Dec 13, 2009 | 2006 Lincoln LS
Nov 05, 2009 | 2006 Lincoln Mark LT
Jul 25, 2009 | 2006 Lincoln Mark LT
759 people viewed this question
Usually answered in minutes!