Question about Cars & Trucks

Open Question

Dodge wont start wiggle wires to pcm will start

98 durango stalls when hot wont start 3 to 5 minuts unless i wiggle the wires connected to the pcm it will start shows code p0505

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 850 Answers

SOURCE: 98 concorde lxi runs great but when you turn it

ignition MODULE needs replacing on the distributor

Posted on Jul 18, 2009

Ad
  • 521 Answers

SOURCE: 2004 xterra P0505 code-idle air control

IAC valve has gone bad. Its located on the throttle body and is what controlls/keeps the vehicle running at idle.

Posted on Jul 19, 2009

  • 192 Answers

SOURCE: where is the PCM located on a 99 dodge durango?

The PCM is located on the fender well in the back of the engine compartment close to the firewall. It is a gray rectangle about 7" x 5". It is ribbed. It attaches using three screws.

It is also located close to heater core parts of your truck. If your overheating problem is related to the heater core, it may in fact be causing the PCM to everheat, though I've never heard of it happening before.

Posted on Aug 24, 2009

Testimonial: "thanks for the info.."

wracefans24
  • 1985 Answers

SOURCE: 99 dodge durango pcm and connectors heat up causing the vehicle..

it would be best if you took it to a dealer and left a mechanic take it home over night,that way he can have the Chrysler drb hooked up when the problem presents its self.

Posted on Jan 21, 2010

  • 1 Answer

SOURCE: Engine Code P0505

After the IAC is replaced it is not enough to clear the code you must also reset the IAC learned adaptive. To do this you will need a higher end scanner like snap-on or such.

Posted on Jun 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont start


Need more info ?
Have you check for codes ? To do this, turn your key to the on position, but not the start position, do this 3 times some what fast, and look at your mileage, if it says Pdone then no codes, if it says NO BUS, then your PCM is gone, which is common in these dodges, then you need a new PCM, but before you get one, try wiggling the wires going into the PCM sometimes they come loose, or one of the pins comes loose.

Jul 07, 2014 | 1999 Dodge Durango

Tip

Dodge Durango Won't Start, Turns over, NO BUS on instrument cluster


1998 - 1999 Dodge Durango 3.9L
2000 - 2001 Dodge Durango 4.7L
1998 - 2000 Dodge Durango 5.2L
1998 - 2001 Dodge Durango 5.9L

The PCM has 3 connectors plugged into it. Try wiggling each connector and listen for a clicking sound, starting with the connector furthest from the front of the Durango, and the middle connector with a white top.

If this doesn't help, replace your PCM. The PCM (power control module) can get hot, causing a short or broken circuit inside the module. Replacing the module will fix the problem. If your truck dies randomly when it's hot outside, but will start back up after it cools down, this is probably the problem.

on Jun 18, 2010 | Dodge Durango Cars & Trucks

1 Answer

Vehicle wont turn on...reads no bus on the odometer...what could be the problem?


pcm. with the key on, open the hood and wiggle the 3 connectors at the pcm which is under the hood on the drivers side inner fender. if you hear the bing while wiggling the plugs, power is at least momentarily coming on. If you get power while doing this, its the pcm.

Sep 24, 2013 | 2000 Dodge Durango

1 Answer

Computer (PCM)


Someone is going to have to use a lab scope to determine where that glitch is originating from. It can be very difficult.

Aug 14, 2013 | 2001 Dodge Durango

1 Answer

2000 durnago 5.9 v8


probably pcm. leave the key in on position. open hood and wiggle the 3 connectors on the pcm (box bolted to the inner fender on the drivers side) and listen for the bing. would be best to try this when the engine dies. Does it show "No buss" in the odometer? thats another indicator its pcm. if you wiggle it and hear the bing, it should start then. You can send your pcm out (check internet) to have the pcm rebuilt which would be cheapest.

Apr 09, 2013 | 2000 Dodge Durango

2 Answers

1991 dakota intermittently stalls or will not start after being run for 30 minutes or more of running.


When it does this you need to check if you have voltage ( spark ) going to the end of the spark plug wire, but it sound to me like your pick up coil is going bad, pick up coil sit under the distributor cap under the distributor rotor same size as distributor assembly ( black ) cheap$$, good luck, hope this was very helpful.

May 14, 2010 | 1991 Dodge Dakota

1 Answer

1996 Dodge Stratus stalls when starting


I had this problem with my 99 Durango and went to AutoBeef.com to discover this was a major problem with 98 & 99 Durangos. The fix was easy -- PCM "brain" was exchanged with a refurbished PCM "brain" from an online PCM company in Florida. You can google as I can't remember name of company. I called them and they said - Yep this is the fix -- the guys told me 3 screws all I had gone to several mechanics and dealers -- none could figure it out. I was so grateful that someone gave me the clue I needed.

Apr 03, 2009 | 2004 Dodge Stratus

1 Answer

Durango won't start in rain or wet


Do you get the "Nobus" warning light when it won't start? Go to AutoBeef.com and you will see that 98 & 99 Durango are notorious for stalling without warning. I fixed mine by purchasing a refurbished PCM "Brain" from an online Florida site -- you can google I don't remember the name. I called them and they helped me -- 3 screws to change out the PCM and no problems with my Durango since.

Mar 16, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...