Question about 1997 Dodge Intrepid

1 Answer

Power Windows and Heat Don't Work

This has been a worsening problem. The windows and heat will not turn on unless I take about five minutes to gently move around the key in the ignition and hold the window switch either up or down. It seems to be easier to get them working when it is very hot or humid outside. Any suggestions on what the problem is?

Posted by on

Ad

1 Answer

Have a repair shop start diagnosing your
thoughts of a worn key cylinder or ignition switch

Posted on Jul 21, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bestdarngood
  • 3037 Answers

SOURCE: power windows

As long as the windows will work fine some of the time, it sounds like the problem is in the power supply and replacing the fuse should fix it, otherwise there may be a loose wire somewhere in the circuitry.

Posted on Jun 03, 2008

  • 145 Answers

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Posted on Jun 08, 2009

  • 109 Answers

SOURCE: power locks and windows

sounds like your BCM is bad!!
Body
Control
Module
:-)

Posted on Jun 18, 2009

polarcycle
  • 1392 Answers

SOURCE: Power windows not working

Sounds like a bad master switch, bad wiring to the drivers door, or bad body control module.

Posted on Jul 15, 2009

polarcycle
  • 1392 Answers

SOURCE: Power windows will not roll down or up

If your other switches don't work, and the master is not locked, you need a new master as it is keeping the others from working.

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Chrysler.cirrus starts runs good,when you shut it off it won restart unless it sets for about an hour. Head lights,over head light, Windows ,dash light all work ,but it won't crank over.


Starter motors and solenoids often sieze when hot towards the end of their service life. You may need to replace the starter. How many times will it start in a row Without running it long enough to heat up. If it will start four or five times cold then fail after warming up and the alternator is charging the battery at 13.5- 15 volts you got a bad starter.

Dec 29, 2016 | 1997 Chrysler Cirrus

1 Answer

The heat and power windows dont work in my 1990 dodge spirit


It looks like the power windows are on a 30amp circuit breaker and the blower is on a 30amp fuse. Both are powered thru the key switch so if those circuits have no power it could be the key switch.

Jan 26, 2014 | 1991 Dodge Spirit

1 Answer

None of the windows will work on my 2003 Toyota Camry


Check your fuse panel under the dash on the driver side and in the engine compartment. One time I had a customer with a similar problem, I checked all the fuses, they were fine. I disconnected the battery positive cable and let stand for five minutes. I turned the key on but didn't start the vehicle, I left the key on for another five minutes for the computer to boot and run diagnostics. After the five minutes were up I started the engine, the windows worked fine. I've worked on lots of Toyota and have found their electrical systems are good, but finicky.

Oct 18, 2013 | 2003 Toyota Camry

1 Answer

Power windows, ac, and clock don't work


I don't see how the engine overheating could have been involved since all three components are on different circuits.
Unless something happened to a power source under the hood such as a fuseable link wire.
You will need a book to find the wiring diagrams to test the circuits.
Sometimes you can get the diagrams from the online auto parts stores such as auto zone.

Jul 07, 2012 | 2003 Dodge Stratus

1 Answer

The heat/defrost won't work


This can be caused by a stuck blend door or a clogged heater core. Can you hear the blend door moving when you turn the temp knob? If not, it may have disconnected from the control panel or blend door. If the door works, remove the heater core and flush it or replace it.

Sep 02, 2017 | 1999 Saturn SL

5 Answers

Power door locks and driver side power window not working. Keyless remote will not open doors although when pressed, the interior lights come on so I don't believe it is an issue with the fob battery....


The solution to this issue was recently discovered during our most recent trip to the shop. We told them not to leave the window down when they changed the battery... BUT DID THEY LISTEN...NOOOO.

So quite by accident I was finally able to correct and then test fail the system and test and fix again...

Here you go.;
1. disconnect the battery and connect both the positive and negative cables together(after disconnected))
2. disconnect the window and lock controller in the driver's side door.
3. Leave cables connected for at least 5 minutes
4. Re-connect door window controller and locks wiring harness
5. Place the key in the ignition and turn to the run position
6. Connect Battery starting with the negative cable(ensuring not to connect then disconnect, (one swift motion)
7. open drivers side door and turn key to the off position(do not remove)
8. You should hear a series of dings
9 Once dings are heard remove the key from the ignition and you should hear the door lock solenoids activate..
10. Congrats.. Your done and the windows and locks work.

Dec 24, 2009 | 2005 Chevrolet Colorado

2 Answers

No heat,engine temp.is normal


the valve that allows the hot water into the heater core is not opening. most likely electronic issue. also check all vacuum and electric lines.

Nov 03, 2009 | 2000 GMC New Sierra 1500

1 Answer

Power windows turn signal and ac/heat wont work


Had the identical same problems on our Chrysler Concorde. We checked all fuses and relays nothing. Then we checked the wiring on the ignition switch mounted under the steering column it was loose. Repositioned it and everything worked perfectly again. Did not cost a thing. Hope this helps!

Sep 26, 2009 | 1994 Chrysler New Yorker

Not finding what you are looking for?
1997 Dodge Intrepid Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...