- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fern, I believe you mean the Mass Air Flow sensor (MAF). It is normally found in the fresh air intake plastic/rubber hoses attached to the air filter box, on yours it may be in the part of air filter box. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." 2003 Ford Windstar clean or replace Mass Air Flow sensor MAF Clean Your MAF 2003 windstar MAF sensor location Google Search
Generally the Air charge temp sensor is in the intake tube between the air box & the intake. However, there is a possibility that it is part of the Mass air flow sensor.
Never heard of a MHF sensor. There is an MAF sensor, (Mass Air Flow) located inside the air body where the air filter housing is though. Check your data and repost with engine size if that is not the answer you seek. Also a trouble code would be helpful to determine what the problem may be.
The oxygen sensors are located under the vehicle on the exaust manafold unless you are getting a certain code wich u should be getting if they are malfuctioning then it could be something else.have you change the fuel filter? It also might need a tune up new plugs wires air filter ext
this engine dos not use a MAP sensor it uses a MAF sensor, the MAF is located in the fexiable rubber air intake hose from the air cleaner to the engine. see photo.
sounds like an intake leak or a vacuum leak , would start it and spray like carb cleaner or starting fluid on the top of the motor while it is cool not hot and see if you get a rise or fall in rpm,s if it does get a response chase down the vacuum leak, if not it is probally the intake gasket
1999 windstar steering air
×