Question about 1996 GMC Sonoma

1 Answer

Shift linkage how do I adjust the linkage

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Can anyone tell me were the low port side is on a 1998 moto carlo

Posted on Jul 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does shift selector go into park sometimes but other times won't?


The travel limits on the shift linkage at the transmission is adjustable. The nylon bushings on the pivot points may be worn too. Have a mechanic inspect the linkage for any abnormal wear on the bushings or the linkage itself. Renew the bushings before you try adjusting the linkage.

Feb 02, 2016 | 1996 Chevrolet Blazer

1 Answer

How do you adjust linkage for transfer case


SHIFT LINKAGE ADJUSTMENT
(1) Shift transfer case into 4L position. (make sure your shifter is fully in the 4L position)
(2) Raise vehicle.
(3) Loosen lock bolt on adjusting trunnion (Fig.
87).
(4) Be sure linkage rod slides freely in trunnion.
Clean rod and apply spray lube if necessary.
(5) Verify that transfer case range lever is fully
engaged in 4L position. (you can do this under the vehicle at the transfer case)
(6) Tighten adjusting trunnion lock bolt.
(7) Lower vehicle

Basically, you are just ensuring that the position you put the lever inside the vehicle is the same position that the transfer case lever is in and then tightening the locking bolt.

Jan 27, 2016 | Cars & Trucks

1 Answer

How to adjust the shifting cable on my 2000 dodge intrepid


If its an automatic, which im sure it is. You can adjust the cable by first that the vehicle doesn't have to be running to do this. Find the transmission after raising hood. Should be easy to see. On top of it you'll see a possible L - shaped lever bolted down with what should be your shift cable. Turn the ignition on but dont start. Undo the shift cable from the linkage and by hand turn the linkage down, shifting through all the gears till in low. Reach inside the car and put shifting lever in low. Hook shift cable back to linkage and from inside put in park. That should work

Jun 08, 2015 | 2000 Dodge Intrepid

1 Answer

1991 Ford F150 won't shift into park or reverse. Will go into neutral and drive, and the linkage at the transmission moves ok


The linkage may be out of adjustment preventing the shifter from moving into reverse or park.
One way to test this is to disconnect the linkage and manually move the lever on the transmision making sure that it can be set into park. Also try moving the lever counting each click from park to low gear to make sure it is clicking into each gear. If this works then the linkage is probably out of adjustment.
On the link cable there is typically a bolt in an oval shaped metal near the transmission shift lever.
1)Detach the shift cable from the transmission shift lever
2)Put the transmision shift lever in the park position, and also the shifter in the cab
3)Loosen the adjustment bolt
4)Reattach the cable to the lever
5)Tighten the adjustment bolt in place
6)Confirm that you can shift through all of the gears
Hope this helps

Dec 01, 2013 | 1993 Ford F150 SuperCab

1 Answer

Adjust shift linkage


remove the arm on tranny shud b splined gently pull of connect and put back on

Nov 09, 2013 | Chrysler PT Cruiser Cars & Trucks

1 Answer

1999 suburban shift in every gear but wont go back all the way in park...just replaced steering column shift mechanism


Check the adjustment on the steering column shift mechanism. Loosen of the adjustment or linkage and place in park then re tension the linkage.

Oct 11, 2013 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

1988 buick lesabre shifting gears problem


Hello;
You need to have the linkage adjusted. Over time, the linkage can go out of adjustment. If this is a column shift car the mechanical linkage may have shifted from hitting a bump or such. Hope this helps, let me know if I may be of further assistance.
Thanks;
Rich
RPM Northwest

Nov 12, 2008 | 1988 Buick LeSabre

3 Answers

Transmission wont shift


check the kickdown/throttle valve cable. It may be bound up and stuck in the maximum position giving you extremely late shifts.

There ISN"T any modulators or vac lines on any Chrysler automatics

Nov 08, 2008 | 1993 Jeep Grand Cherokee

2 Answers

1982 rabbit shift linkage


There is a plastic ball that is in the shift linkage that also wears and is usually not included in the shift linkage bushing kit. It is attached to a metal piece and is bolted to the shift linkage. This is generally the problem if you already replaced the bushings.

Sometimes the linkage is out of adjustment but I would make sure that the ball is not worn first. They generally cost $5.00 - $8.00 or so.

If you need to adjust the linkage you can try the following, but if the bushings or the ball is worn adjustment will not do any good.

There is an adjustment on the shift rod that goes from the shifter to the transmission. It is a rod slipped into a tube with a locking collar or clamp.

The way that I do this is to make sure that your vehicle is in 1st gear and then loosen the bolt on the clamp.

Make sure that the clamp is loose enough so that the shaft can slip in the tube. Put the shifter in the 1st gear position and then tighten the clamp.

You may need to fiddle with this a little to get it in just the right spot.

This is much easier if you have an assistant.


Nov 05, 2008 | 1983 Volkswagen Rabbit Pickup

Not finding what you are looking for?
1996 GMC Sonoma Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...