Question about Cars & Trucks

1 Answer

Hello. I have a 2006 Toyota Corolla Ce Model. I just changed the Rear Drums And Shoes. They are after market parts. Ever since I changed them I hear this clicking noise ( which I never heard before with the previous Breaks) when I hit the brakes I hear it but you hear it more right when the car is about to come to a complete stop. It's driving me and the mechanic nuts. Please Help!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 88 Answers

Hi, may you need to check if the springs holding the brake shoes touching on the drums or the hub.

Posted on Jul 20, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Scraping noise in rear of 2000 Toyota Rav4 AWD

just wanted to stop to offer some tips. I just put in new brakes on last night. I too had the same problem. The brakes were fine, but I replaced them anyway. The drum seem fine, and my emergency cable was a bit loose too. What you can try is hiting the ebrake while going in reverse or in drive. It may help. If not, adjust the ebrake cable will be needed, it not too hard to do. It should be by the rear tires towards the center.

Posted on Oct 13, 2008

  • 32 Answers

SOURCE: 1996 toyota corolla rear drum brake (Australia)

to remove a stuck brake drum what I do is. there is a couple of holes in the drum a size 10mm nut screw hole. get two 10mm bolts screw it in the two OPPOSITE holes and screw in at the same time until the drum is free. we call this screws extractor. Check for any damage in the shoe and other parts because you are force extracting the drum

Posted on Nov 09, 2008

  • 1 Answer

SOURCE: Knocking in Rear brakes 1999 Saturn

did u put them on backwards?

Posted on Nov 13, 2008

  • 295 Answers

SOURCE: Rear Brake Noise

The rear wheel bearing is cause of failure .
I would have the rear hub and bearing assemlby replaced.

Posted on Apr 11, 2009

  • 2 Answers

SOURCE: 2001 Toyota Corolla lifter noise

Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

Posted on Jun 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why 2010 toyota corolla rear wheels wont spin after replacing drums and shoes?


you should have backed off the e-brakes before you installed new shoes. if you had to hammer the drums on that should have been a clue that you did something wrong. you will have to get the drums off some way and check to make sure you didn`t install something in the wrong way.

Sep 05, 2014 | 2010 Toyota Corolla LE

1 Answer

Rear Whhels locked


check that the shoes you used are the same width as the ones you took off or the drums have been machined to the width of the new shoes.. As shoes come in varying widths for different models of the same vehicle ( station wagon and utility shoes are generally wider than sedan shoes) it is possible that you were supplied with the incorrect items.

Apr 12, 2014 | 1993 Toyota Corolla

2 Answers

I have a 2004 Corolla with 150000 miles. The rear brake shoes were replaced in April and a couple of months later there was a grinding sound. The mechanic replaced the shoes again and we still had the...


When I replace rear shoes I always replace the mounting hardware. You didn't mention if your shop did this or not so I would suggest doing so. While there, inspect wheel cylinders. If they're wet or 1 side sticks out farther than the other then you may have an issue with a faulty wheel cylinder. If you notice a pulsing or surging movement when you apply brakes you may have a warped drum - other than these, A hands on diagnosis is needed.
Hope this helps!!

Nov 22, 2010 | 2003 Toyota Corolla

1 Answer

Corolla 2000 brakes, I did change master cylinder,


System may have air in it bleed from farthest wheel to closest.
If rear shoes are out of adjustment re adjust them
Possible but most pads require a "bedding in" 20 stops 50 to25mph or so.

Jul 28, 2010 | 2000 Toyota Corolla

1 Answer

1994 corolla 1.3,rear n/side brake drum runs hot, new shoes fiitted,is it poor wheel cylinder pistons?


Check that the brake shoes are adjusted correctly and that the new shoes ar'nt to thick.It is always better to skim the drums to fit new shoes if needed.Poor wheel cylinder will cause no brakes at that wheel unless it is siezed and not releasing

Aug 07, 2009 | 1994 Toyota Corolla

1 Answer

1990 Toyota Corolla rear drums bad?


If your pads are completely gone then you may have damaged the drums if you still have any pads left or shoes if they are drum brakes then you still need to have your drums checked out for the proper size to still be there for the brakes to function properly. You won't know until you look at them or are shown them by a pro. who has measured and found them to be beyond reuse! If you had leaks then you will need to repair the brake calipers or the wheel cylinders depending on which system you have drum or disc they are different!!! Hope this helps someway !!
Swampratt200 AAAAEEE!!!!!!

Jul 05, 2009 | 1990 Toyota Corolla

1 Answer

1993 Toyota Corolla rear brake adjustment?


ok to adjust the shoes first obviously have the shoes set up with springs and everthing ready to go ,,then youl see the straight roundish threaded bar running in the middle from shoe to shoe and attached a round piece which can move using a flat head,,but you need to use another flat head to pinch back the little arm thats connected to the piece your adjusting ,,thats just ther to prevent the shoe from moving itself,,youl no when you look what i mean... hope this helps,,,

Apr 24, 2009 | 1993 Toyota Corolla

1 Answer

Emergency Brake Loss


Good day;
After you put it all back together did you drive the car in reverse then apply park brake? If not give this a try, just use your hand park to stop the car, these should fix the problem,Let me know how you made out.

Cheers

Aug 27, 2008 | 2001 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...