Question about Volvo XC90
Reduced engine performance light came on - not starting..changed brake pads as we knew this needed to be done, code went away - now we have 063 what is this and how do we fix it. the car had no other problems except needing alarm system repair. it is a 2003 Volvo xc90
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Grounding issue "Circuit low" = ground wire problem or another system on the same circuit using too much current.
Check all wiring issues and then correct the issue to have the code go away :)
Posted on Apr 03, 2009
Weell it sounds like you have the days old problem Pepole dont know how to look after there cars.
The muck you still have in the engine isent doing it any good and so you have to get rid of it all, as its in the engine block and is got to go ,,so drain a little of water out and put in 1/2 a cup of washing up liquid in the radiator and start the engine and let it get hot and take the reves up to 1000 rpm now and then to keep the water going around the system, after about 1/4 hr turn off,,stand for 10 minutes ,,and then remove the cap slowly and then take off the Bottom hose and let all water out also take off Top hose at the engine end and put the house water hose in the top and turn it on till all water comes out clean. Then put hose up into the bottom hose and do the same again ,and the same in top again.Now with a clean engine you can do the same to the new Radiator and wash out all gunk .then check the thermostat and make sure its 100% (any doubt through it out) and take note how it comes out so you can fit a new one the same way,
Now refit both hoses and fill with coolant or antifreeze and TURN on the heater to hot before starting as you also have to get out the air from heater when it was drained and you will trap the air which might cause you code problems..
But now try service light reset
1,,Turn Ignition to Number 1position.
2,,Press and hold "day counter"reset button and turn
ignition to II(second) position,hold down for about 12 seconds.
3,,Afterservice light flashes,release button,there should be 2 beeps confirming reset was successful.
Let me know how you get on .. Ron
Posted on Nov 02, 2009
I too have the same problem. Mine is a May 04 2.5T. Volvo not understand the problem because the unit does not record errors. It 'a very dangerous problem. If I'm overtaking on the motorway but the machine stops and if there is traffic is difficult to go to the right of way. Sorry for my bad english.
If anyone knows what is the problem please write me.
Enzo - Italy
Posted on Apr 04, 2010
Tips for a great answer:
Jul 30, 2014 | 2007 Volvo S80 V8 Sedan
Oct 19, 2017 | 2009 Volvo C30 T5
Aug 19, 2012 | 2006 Volvo V70
Aug 11, 2017 | 1998 Volvo S70
Apr 16, 2010 | 2001 Volvo S60
Aug 13, 2009 | 2004 Volvo XC90
Jun 04, 2009 | 1993 Volvo 850
Dec 06, 2017 | Volvo Cars & Trucks
983 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: