Question about Cars & Trucks

1 Answer

My truck will not do anything - Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 133 Answers

What is wrong with your truck. Do you do the troubleshooting with your truck. What's the model of your truck. NEXIQ 125032 can help you check the truck for detail.

Posted on Jul 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to anything


Did you check the battery? I need to know more. Nothing lights up in the cluster?

Sep 10, 2014 | 2009 Chevrolet Silverado 1500

1 Answer

How to change lifter shims on a 1990 geo storm


old post. (no FSM book, or can log in to alldata.com>?
its the 1.6L twin cam, only IT has shims.


answered; with no photos, get the book, or login.
steps: (quote)
The notch on the crankshaft pulley should align with the 0 degrees mark on the timing gear case. Make sure the rocker arms on the No. 1 cylinder are loose and the rockers on the No. 4 cylinder are tight. If not, turn the crankshaft one complete revolution and align the marks again.

Using a feeler gauge, measure the clearance between the cam lobe and the selective shim on the intake and exhaust valves on the No. 1 cylinder, then the intake valves on the No. 2 cylinder and the exhaust valves on the No. 3 cylinder. Note readings.

Rotate the crankshaft 360 degrees. Using a feeler gauge, measure the clearance between the cam lobe and the selective shim on the intake and exhaust valves on the No. 4 cylinder, then the intake valves on the No. 3 cylinder and the exhaust valves on the No. 2 cylinder. Note readings.

The valve clearance obtained on the exhaust valves should be between 0.008-0.012 in. (0.20-0.30mm). If not, replace the selective shim by turning the camshaft lobe downward and installing tool J-38413-2 or J-38413-3 (valve lash spring spacer) between the camshaft journal and the cam lobe next to the selective shim. Turn cam lobe upward and remove the selective shim. Install new shim using the selective shim chart.

The rear camshaft bearing caps must be removed to remove the selective shim.

The valve clearance obtained on the intake valves should be between 0.004-0.008 in. (0.10-0.20mm). If not, replace the selective shim by turning the camshaft lobe downward and installing tool J-38413-2 or J-38413-3 between the camshaft journal and the cam lobe next to the selective shim. Turn cam lobe upward and remove the selective shim. Install new shim using the selective shim chart.

When the adjustment is completed, install the cylinder head covers and connect the battery negative cable. Start the engine and check for leaks.
end quote.

the real question is.
where do i get shims from a dead car company if in USA? now that be the big question.

Apr 12, 2014 | 1990 Geo Storm

1 Answer

My door code isnt doing anything


Possible break in door wiring, Faulty relay or fuse.

Nov 14, 2013 | 1997 Lincoln Town Car

1 Answer

Help me please


Take the vehicle to a repair shop for an evaluation
There is nothing like a genie in a bottle that fixes anything
You don't put anything into the intake or prime anything,
on any vehicle

Jul 08, 2013 | 1996 Chevrolet Blazer

1 Answer

GOOD BATTERY BUT HAVE NO POWER TO ANYTHING


replace your positive wire from battery to starter

Mar 16, 2013 | 1993 Dodge Dakota

1 Answer

Truck won't start at all changed starter have cleaned all electrical plugs truck won't do anything


try selionoid..bump the neg and positive together with a screwdriver..if it cranks walah go get another selionoid

Nov 21, 2012 | 1993 Toyota Pickup

1 Answer

I was getting a strange rubbing sound when i used on brakes, I replaced the pads with the thermelquit weaver and still have the same issue in my 2005 cadillace sts and ideas.


was there anything wrong with the old pads? If you didnt see anything wrong, then replacing them isnt going to fix anything.

Dec 12, 2010 | 2005 Cadillac STS

1 Answer

Need wiring digram for gmc truck chasis 1993 firan ultrastar motor home


Well, anything chassis related you will need the GMC manual, and anything coach related you will need the Firan manual.

Oct 07, 2010 | GMC G3500 Cars & Trucks

1 Answer

06 f150 will not turn over


Neutral safety switch on the tranny?

Aug 13, 2008 | 2006 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...