Question about Cars & Trucks

1 Answer

Was cleaning my car today and wen I went to use the front wiper blades they went half way up my wind screen and stop no water cane out either plus my back window wiper won't turn off now I've a 05 Hyundai accent hatch back. Please help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check your fuses

Posted on Jul 19, 2013

  • Michelle kiernan Jul 20, 2013

    Hey you were right a fuse had blowing but wen I put a 20amp replacement in that blew but with a 10amp it's working again is that normal?? Thanks 4your help


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 65 Answers

SOURCE: Hyundai Accent SI-back windscreen wiper

there is a 15 amp fuse for the rear wiper under the bonnet check this, also i think the accent has a seperste switch in the dashboard for the rear wiper like th hyundai coupe.

Posted on Mar 24, 2009

  • 34 Answers

SOURCE: windscreen wipers banging on hood

just turn of the wiper switch turn off the key 30 sec later, move the wiper arm to the park position, then remove the caps plastic caps at the start off the wiper arm ( if fitted) and then tigthen the nut there and that should fi it

Posted on May 18, 2009

  • 31 Answers

SOURCE: Front wipers stopped working

Try to run a ground test on the motor, If it gets power, then you neeed to replace the switch.. if it doesnt run with the ground test, then you need a wiper motor.

Posted on May 21, 2009

  • 450 Answers

SOURCE: Front speakers not working on hyundai accent

check wiring in door hindge area for breaks move around loom while listening to radio to hear if speakers start to crackle or work

Posted on May 27, 2009

  • 1 Answer

SOURCE: VW POLO 05 - back wiper not working

Blown fuse!

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i stop the wiper blades in the middle of the screen jaguar xj

On the WEB:

Front Wiper Blade Change Jaguar XJ8 (2004-2009) - 2008 ...
Free video on how to replace the front windshield wiper blades in a 2008 Jaguar XJ8 L 4.2L V8. Complete instructions for changing the front wiper windshield ...

Jul 25, 2015 | Jaguar Cars & Trucks


Replacing Wiper Blades or Not

Do not replace your wiper blades until you have tried this, get some warm soapy water, soft all purpose cloth. Hose down your front and rear windscreen (if fitted with wiper blades) with normal water, clean the windscreen as you would when washing the vehicle. Get your cloth and dip it into warm soapy water, if your wiper arm stays upright put it in that position other wise lift it up and put a piece of towel or similar under it. Now with the soapy cloth give the wiper blade edge a good scrub, up and down, hold the blade itself with one hand on one end, it may slide out, you will notice the cloth getting black, you are cleaning off all the dirt that is stuck on the wiper blade, simple as that. It is usually that dirt which causes your wiper blades not to clean properly, you will eventually need to replace it but give it a go, you will be surprised.

on Feb 20, 2011 | Chevrolet Chevy Cars & Trucks

2 Answers

2010 Reg Ford Focus 5 door hatch rear screen wash not working. Front is OK. How do I fix it?

the washer fluid could be empty / the fuse for the wiper blew / the relay went bad /if you tried to use the wipers without clearing ice away you blew the fuse/ if you just put water in instead of washer fluid it's frozen/ if the wiper works and there is windshield fluid in the tank and not water and all fuses are good the pump motor for the fluid went and is easy to change

Feb 25, 2015 | Ford Cars & Trucks

1 Answer

Hi, I have a ford falcon station wagon and the window wipers stopped working which included the back one and the sprayers! so I took it to a garage and they said the fuse had blown they replaced the fuse...

It is because of a short in the wiring system of the wipers. If you have an Ohm meter, check for connectivity between each of the front wiper blades and fluid pump. If you don't have one, tell the people at the shop to fix it.

Once you find the one that is shorted, replace the wires to that device and the fuse and all should be well.

Good luck!

Sep 08, 2011 | Ford F Cars & Trucks

2 Answers

From the 1st day I picked up the car from the dealer, my new 2011 Toyota Avalon's wind shield wiper makes unwelcome loud squeeking noise when wind shield did not has enough water and wiping speed is in...

I would suggest putting new wiper blades on it or failing that have the screen cleaned as sometimes the cleaning stuff the valeters use can cause this annoying problem
Hope this helps

Mar 02, 2011 | 2011 Toyota Avalon

1 Answer

1988 VW GTI 16 valve.How to fix and replace windshield wiper arm(not just blade). It rotates beyond wind shield.

Remove the wiper arm. Switch on the wipers for a 15 seconds or so then switch them off and allow the wiper motor to reach the "Park" position. Re-fit the wiper arm/blade so the blade sits an inch or 2 from the lower edge of the windscreen. Pour some water on the screen or use the screenwashers and try the wipers to see if they still travel beyond the edge of the screen. Small adjustments can be made by lowering the arm towards the bottom edge of the screen by a couple of splines on the shaft. If it still travels beyond the edge of the screen then you may need a replacement linkage as it could be worn. You may be able to buy the linkage only and use your existing motor-I know this is possible with the Sharan but not sure on your model/year.

Oct 28, 2010 | 1988 Volkswagen GTI

2 Answers

Wiper blades went half way through cyle on my 1990

that could be two problems. check both your wiper motor and the wiper switch.

Mar 03, 2010 | 1990 Chevrolet Corsica

1 Answer

My drivers side windscreen blade, judders and drags up the screen, leaving lines of water. I have tried different blades, mazda screen wash, Rain X on the screen (which made it worse), Mazda said it was...

If the drivers side only dose it and not the pass side then dosent it spell that the wiper blad IS NOT THE CORRECT TYPE or the screen needs cleaning with Metho and cig ash and polish the screen with it and fit a set of blades to suite another car with the metal plate fitted outside to catch the the wind and hold on to screen,,,as alot of cars have the same lenth blade and the same fittings and the arms pivort could be worn. you wasted your money on the motor..

Oct 12, 2009 | Mazda MX-5 Miata Cars & Trucks

1 Answer

Front wipers stopped working

Try to run a ground test on the motor, If it gets power, then you neeed to replace the switch.. if it doesnt run with the ground test, then you need a wiper motor.

May 20, 2009 | 2005 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides