Question about Honda Cars & Trucks

1 Answer

Installing a frarview moniter

I need some help! I am installing a rearview LCD monitor mirror in my 2005 Honda accord coup. I have completed almost everything but acquiring the power source for the actual mirror. I was able to remove the housing for the dome lights, which Honda nicknamed the "spotlights" and gain access to the power sources. There are two "plugs" that power the lights one is green with four wires, none red and black, and another which is beige that has two wires (one green and one white with a back line on it). I am attempting to tap into one of these power sources. I do not know which one I need to use and which wire corresponds to the red and black wires coming from my 12v mirror. I don't need to worry about the unit receiving continues power, it only powered on when the camera is receiving power, when the car is I reverse. Any help would be greatly appreciated! Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Use a multi meter to check which wires have 12volts

Posted on Jul 19, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Fog lights are not working.

The lower Fog lights to my 2003 Chrysler Sebring Conv LXi do not work. And I do not have an owners manual to look at what fuse is what in the relay center near the engine. There are bulbs there in tact on the front ground effects. But they do not come on ever.

Posted on Nov 04, 2008

  • 151 Answers

SOURCE: Fitting a new car stereo to the old wiring

hmm, this is an old post, do u still need help??
If u do lemme know and i'll give u a few tricks u can use.

Posted on Nov 17, 2008

  • 1 Answer

SOURCE: Honda S2000 engine installed in kit car. How do I wire alternator

Unfortunately the Honda alternator is regulated by the ECU, which allows the ECU to intelligently reduce alternator engine loading to improve fuel consumption. The intelligent system uses an electrical load detector (ELD) located near the battery to control the alternator output voltage. A two wire alternator has an inbuilt regulator that will always generate the required charging voltage. When a battery is fully charged and the electrical loading is low there is no need for generating the charging voltage, in this situation the honda alternator will reduce the output voltage to reduce engine loading, hence improved fuel economy.

Posted on Jun 20, 2009

shadtremonky
  • 353 Answers

SOURCE: 1998 jeep cherokee, in line 6 cyl. oo power to

check the wire harness at the door hinges

Posted on Jun 25, 2009

  • 713 Answers

SOURCE: Installation of Zero 4 powered side mirrors

sounds like your mirrors that came on the car were heated and the ones you are replacing them with are not thats why the extra wire on yours.

Posted on Aug 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side mirror replacement


Instructions1.
    • 1
Remove thedoor panel. Refer to your Honda Accord repair manual for theinstructions in removing the door panel. Unhook the rods and connectors on theinside of the door panel and set it on the floor.
    • 2
Remove thefilm covering the access to the side mirror. It's difficult to avoid damaging thefilm while removing it so you will need to purchase a new piece of filmcovering when you buy a new side view mirror.
    • 3
Reachthrough the service hole into the mirror housing with a screwdriver. Loosen thescrew that holds the mirror. Twist the screw out with your hand.
    • 4
Reacharound the door and support the mirror with your other hand. Continue to twistthe screw out, then catch the mirror as it drops out when you remove the screwcompletely. Put the screw in a safe place so you don't lose it.
    • 5
Installthe new side view mirror by positioning it where the old mirror was. Insert thescrew you took out in Step 4 and twist it in with your hand. Insert ascrewdriver into the service hole to tighten the screw.
    • 6
Replacethe film covering that was damaged when you took out the old mirror. Push itinto place in the indentation on the door.
    • 7
Sit in thecar seat and adjust the mirror so you can use it properly.

Jul 06, 2012 | 2005 Honda Accord

1 Answer

How do I attach a review mirror for a 1994 thunderbird lx


Go to an auto parts store and buy rearview mirror adhesive. Your rearview mirror will separate from the small mounting piece that adheres to the windshield. Clean off the glass where it will sit. Follow the directions on the adhesive package and install the mount on the windshield. Once it dries, install the mirror on the mount. Rearview mirror adhesive is one of the most powerful adhesives on the market. Don't use anything but rearview mirror adhesive or the mirror will not hold.

May 21, 2010 | 1994 Ford Thunderbird

1 Answer

2005 Honda Accord sunvisor buzz or rattle


has the visor got a slider for the mirror,if so, close it when not in use if not change it for a solid tinted plexiglass visor(no mirror) sorry but females will need to use central mirror for makeup..i am not a sexist by the way .........

Feb 11, 2010 | 2008 Honda Accord

1 Answer

I need to know what each color means on my distributor???


Review this guide as reference; this Electrical Schematic Diagram applies for 1994 Accord Coupe series of model. Here you will find complete explanation about electrical system of the vehicle. Started from Troubleshooting (tips and precautions) on handling the electrical system, in this manual you will be guided step by step examining each electrical component installed and its connection for example in Wire Harness and Ground Location, started from Engine Compartment, wiring harness is shown from engine ground cable, starter cable, and battery ground cable.

These 359 pages of pdf.fieltype manual is divided into some sections which are Wire Color Code, Relay and Control Unit Location, Wire Harness and Ground Location, Air Conditioning System Circuit, Anti-lock Brake System, Battery, Blower Control, Charging System, Cruise Control, Fan Control, Fuel Pump, Fuses, Ground Distribution, Heater Control, Ignition System Control, Lighting System, and etc.
Download the complete 1994 Accord Coupe Electrical Schematic Diagram here.

You can also find complete workshop manual of 1994 Accord Coupe here.

Pass: freepdfmanual.com

Good luck.

Sep 21, 2009 | 1997 Honda Accord

1 Answer

I have a 2004 coupe v6 - i've managed to dislodge my rearview mirror, it's not broken but came away from the w/screen.It seems nigh on impossible to remove the part still attached to the w/screen to then...


didn't understand a word you wrote except 'it's not broken but came away from the 'w/screen'. hmmm... you 'managed to dislodge the rear view mirror'... why would you want to do this?
Tell you what, take the vehicle into an authorized Hyundai Dealership and have them fix it for you... you don't appear to have mechanical inclination.

Sep 16, 2009 | 2005 Hyundai Tiburon

2 Answers

Side View Mirror Installation instructions needed


For a 2005 Honda Pilot, I am a complete Amateur and I had no problem installing this mirror.

1) Lower the window, and only remove the Interior MIRROR panel, NOT the entire DOOR Panel, as some sites my recommend.
2) Once the Interior Panel is removed, the power cable is attached to the mirror, remove this cable.
3) There are 3 Bolts that are BLACK (atleast in my vehicle) that need to be removed.
3) Once the bolts are removed, the mirror should come off easily.
4) Place the new mirror in place of the old one and secure all three bolts, and then secure the power cable.
5) Then place the interior panel back.

That is it!

May 20, 2009 | 2005 Honda Pilot

1 Answer

Kia sorento 55 plate wing mirror


  1. Disconnect the negative battery cable.
  2. Remove the outside rearview mirror garnish.
  3. Disconnect the harness connector.
  4. Remove the 3 bolts and the outside mirror.
To install:
  1. Install the outside mirror and tighten the bolts to 60 inch lbs. (7 Nm).
  2. Connect the wiring harness.
  3. Install the mirror garnish.
  4. Connect the negative battery cable

Jan 31, 2009 | 2005 Kia Sorento

1 Answer

2005 accord hybrid blinker door mirror


Dear ejustin

Unfortunately you have too release the door panel to carry out this simple replacement.
remove screw from behind small panel inside door release handle (small screwdriver ti flip out little cover)

Remove two screws from inside door puller (one you use to close door) these are also under a small panel you remove this also with small screwdriver.

Then you will have to pull door penal away from the fixings usually done with a special tool but is quite poss-able with fingers.

Do not use a screwdriver you will just cause damage and break fixing clips.

Take care as their are wires feeding other equipment you do not need to remove panel completely.

Release cable to mirror

Remove three nuts holding mirror to door these are behind plastic quarter panel.

Repeat process to put on new mirror 20 minutes max.

Cheers

Frazer

Jan 03, 2009 | 2005 Honda Accord

1 Answer

Air bag light on dash stays on seat belt doesn't retract


hopefully they put the tpms sensor in the new rim. and the computer somtimes will need to be initalized to moniter the tire pressures.

Dec 16, 2008 | 2004 Honda Accord

1 Answer

Custom Rear view mirror


Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**

However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.

The best solution is to leave the original factory-installed rearview mirror in place.

May 16, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...