Question about Cars & Trucks
Car went through an area where the streets had just flooded, started sputtering and cut off. Now it just whine when you try to start it but it won't start???
If its a petrol you might need a new coil pack and the spark plugs either dried out or changed some wddddd-40 should also help to push water out of places take some simple pieces apart and check for water other than all that you might need a mechanic
Posted on Jul 19, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2002 lincoln ls engine light
These cars are famous for leaky seals where the valve cover interfaces with the cylinder head, at the spark plug journals. They fill with oil, short the coils and cause a misfire. Driving it any significant distance can destroy your catalytic converters ad unburnt fuel ignites therein, creating inferno-like conditions and a fire hazard too. You'll get a "300 code", such as 301 if cylinder 1 is misfiring, 302 for # 2, etc. Pull the coil off the spark plug for that cylinder and if it is moist at all, that's your issue. Have new seals put in, or you'll just keep blowing coils at $50 a whack.
Posted on Apr 11, 2009
Make sure the battery is fully charged first. Now you need to find out if spark to the spark-plugs is present and that the fuel pump is working. Let me know and we'll go from there.
Posted on Nov 12, 2009
Hey I have the same problem...i changed all 8coils and spark plugs. But now when I start the car sometimes it stutter(shaking), but once I pass 3rd gear it drives fine, the engine light was blinking, then stayed on..but I disconnect the battery to clear it. Would the car shake if your low on fuel?
Posted on Feb 03, 2012
I have the same problem and i checked the knock sensor should give you a code 43!!! Disconect the connector of knock sensor and with multimeter you should get 4-6 volt with ground!!
Plsss contact me at email@example.com to disscus more about our problems !!
Posted on Nov 07, 2012
Tips for a great answer:
Feb 03, 2016 | 2005 Lincoln LS V6
Sep 03, 2014 | 2005 Lincoln LS V6
Mar 18, 2010 | 2004 Lincoln LS
Feb 22, 2010 | 2001 Lincoln LS
Sep 29, 2009 | 2006 Lincoln Mark LT
Nov 19, 2008 | 2000 Lincoln LS
Nov 12, 2008 | 2000 Lincoln LS
Jul 19, 2018 | Pontiac Cars & Trucks
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: