Question about Cars & Trucks
Just bought a replacement motor for 95 fordf explorer front driver side. When I purchased the motor the auto parts store computer said to re-use the self thread screws on the old motor. My old motor has pop rivets vice screws. Parts store didn't know what size replacement screws to use. Can you help with the size of the replacement screws to install the motor.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to drill a hole in the sheet metal after you pull off the door panel. There is a dimple where the hole should be drilled. Make sure the hole you drill is big enough to fit the socket. I don't know why ford deigned it like this.
Posted on Oct 16, 2008
SOURCE: 2002 Ford Explorer V6 misfire
check for spark/fuel /vacuum -air leaks.....test plugs..then wires .and egr valve and snorkle and intake areas for air being introduced near each cylinder with carb cleaner wafted near then while idling
Posted on Mar 14, 2009
try going to real auto parts store not some chain franchise like pepboys or autozone ,with bolts means studs to a ford which will be a rotor with hub unit,and if it has just has holes then it's a slide on rotor or it needs to be pressed to your hub assembly,just go to a small parts store with someone who knows the difference,,2wheel or 4x4 makes all the difference.
Posted on May 06, 2009
Disconnect your negative battery cable. Locateand remove the screws that hold your interior door handles in place (they maybe hidden by snap in, or snap on clips). Remove the interior door handles, thendisconnect the wire clips to the switches. Your panel is held in place by snapin clips; use a small pry bar to pull them from the door (try to get as closeto, or directly under the clips to prevent them from tearing out of the doorpanel). Once the clips are pulled, pull the panel upward to remove it from thedoor. Once you gain access to the interior of the door, you can remove your window regulator and re-position it, or replace it so it works.
Install in reverse.
Posted on May 26, 2009
if you don't have the correct tools don't try to do it you self. the springs are under alot of pressure. can break your neck if it shoots out. have a shop do it for your safety
Posted on Aug 07, 2009
Tips for a great answer:
Mar 20, 2012 | 1995 Ford Explorer
Mar 03, 2011 | 1995 Buick Roadmaster
Jul 13, 2010 | 1995 Ford Explorer
May 25, 2010 | 1995 Ford Explorer
Oct 12, 2009 | 1995 Nissan Quest
May 26, 2009 | 1995 Ford Explorer
Jul 27, 2008 | 1995 Ford Explorer
93 people viewed this question
Usually answered in minutes!