Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: oil change light
Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.
Posted on Sep 22, 2008
I assume that you have a 1.8 engine. The oil filter is in a round metal housing under the engine; you have to remove the housing to access the cartridge type oil filter; the 1.8s do not have a "spin-on" filter.
Posted on Oct 11, 2008
when you open your hood look in the back of the motor on the left side.. you should see a stick with a circle on the end of it for your finger have you vehicle running warmed up that means let it run for 10 or 15 min. and then pull the stick out.. wipe it off real good. stick it back in all the way.. pull it back out and hold it horizontally and check it.. it's sometimes hard to read because it has bubbles on it.. try it a couple of times to get an accurate reading good-luck ray
Posted on Jan 16, 2009
if you have a 1ZZ engine
4.2 quarts, 4.4 quarts with oil filter change
if you have the 2ZZ engine (XRS model) it is
4.4 quarts, 4.6 quarts with oil filter change
NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.
Posted on Sep 10, 2009
adjust the accelerator cable.
Posted on Mar 15, 2010
Testimonial: "i thought the idle was ecu controlled,but i see what your saying,ajust cable stop.ie allen screw with locknut to bring up revs.thanks"
Tips for a great answer:
Dec 02, 2016 | Toyota Corolla Cars & Trucks
Aug 04, 2015 | Toyota Cars & Trucks
Jul 05, 2014 | 2003 Toyota Corolla
Nov 10, 2017 | Cars & Trucks
Apr 28, 2011 | 1998 Toyota Corolla
Nov 27, 2010 | 2005 Toyota Corolla
Oct 29, 2010 | 2003 Toyota Corolla
Oct 25, 2009 | 2001 Toyota Corolla
May 30, 2009 | 1999 Toyota Corolla
Jul 29, 2008 | 2004 Toyota Corolla
41 people viewed this question
Usually answered in minutes!