Question about Cars & Trucks

Open Question

Fiat uno HI I have a Fiat Uno Pacer 1400 and recently it started giving same problem it did bout 1 and half years ago. when im driving car will jerk and just dop idling and cut out then battle to start for few minutes. Regardless if car is warm or not. First time i replace distributor and problem was gone,now its repeating. Cant be the distributor again surely? Thanks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: fiat uno 1.2 ecu

front right wheel bearings

Posted on Nov 18, 2008

  • 99 Answers

SOURCE: Fiat Seicento Sporting - starting problem

I'd like to ask first, what service did you have done?

My best suggestion to you would be to have a automotive place check your starter, it sounds like you are having a problem with the starter itself, not the battery, not the alternator. I recently had a similar issue a few years ago on a 1994 chevy cavalier. Starts just fine, but once in a while I'd turn the key, "click" and the engine would not even turn over, trying it a second time got it started. Eventually, it got so bad, it never started again. I took it to a auto parts store that offered a free electrical system diagnostic service. They told me that I had a "dead spot" in the starter that if the starter stopped spinning in just that spot, it would not work when I tried to start the car.

If you are not hearing a "click" but you are hearing the starter "whirrr" then it's a problem with the starter solenoid. This part pushes a gear into the flywheel of the engine to start turning the engine over. So (because it's hard to type sounds) the correct sounds you should hear when you turn the key are..."click"(followed immediatly by) "rrrr...rrrr...rrr...rrr" and of course "vrooooommm". If you hear...(no click), "whirrrrrrr"(sounds like an electrical motor spinning) then nothing else. That is a problem with the starter. If you hear, "click" then nothing else, it is a problem with the starter it self or the wiring to the starter.

Please, excuse the very descriptive "sounds" as it is the best way to describe what you SHOULD be hearing every time you start the car.

Some less common problems include the voltage regulator, starter relay, and corroded or loose wiring to and from the battery and/or the starter. Checking wires and any electrical repairs can be dangerous if you do not know what you are doing and I have to ask you to talk to your local shop if you have any questions about fixing the problem. If you want to do the work yourself, I'd recommend buying (autoparts store) or borrowing (some libraries) a Chilton or Haynes Manual for your specific make, model, and year car. They've saved me thousands in repairs so far b/c I like woking on my own vehicles.

I hope that I could help you narrow down your problem so you can look up the repair and parts online. Or if you do take your car to the shop, let them check these parts first for the most likely source of the problem. Good luck, and if you still have questions, please write a comment and I will try to respond with a more specific suggestion. Don't forget to rate my solution! Thank you.

Posted on Jan 11, 2009

SOURCE: Fiat uno struggles to idle on its after i have warmed it up using

Would this be the 1108cc or 1372cc model Uno ? You will find the vacuum advance unit attached to the distributor. Check the pipe connection from the vacuum advance to the carburettor - loose or damaged. This is normally the main cause for uneven idling/stalling. Alternatively the carburettor needs adjustment via the carburettor idling screw. Hopefully this will help. Good luck.

Posted on Jun 12, 2009

  • 89 Answers

SOURCE: my car brakes become spongy after starting the

check rear brakes for leaks could be leaking wheel cylinder

Posted on Jul 12, 2009

SOURCE: I have a problem with my fiat uno it has petrol

Hi.I had problems with my uno cutting out while driving and sometimes not starting.Ok the previous problem there was a short on the wires at the ignition barrel were all the wires plug in.I cleaned the burnt area,replaced plug and problem solved.The simptoms was:Car cuts out when driving,car doesnt always start,display lights in dash are not very bright.

Posted on Nov 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1992 fiat uno pacer -1400 carbarator looses sparks from coil it come and goes after some time it comes back plz help me thanx z


replace the coil or coil packs
if no better plugs and leads and distributor cap if it has one

26233949-ynvug1pb1td0jsjajemyimen-1-0.jpg

Jul 08, 2016 | Fiat Cars & Trucks

1 Answer

Where does the cam mark for uno 1400 pacer points?


If the engine is an interference type, you will have some valve and piston damage. Typically the timing marks are on the crank shaft and the cam shaft, under the timing cover.

Oct 29, 2014 | 1989 Fiat Uno 1.4

1 Answer

What am I missing i have no spark on my uno pacer 1400 ?


check for loose /missing wires in the ignition circuit ( coil wire fallen out ). check immobiliser operation . run fault codes to check for cam/crank position sensor problems.

Sep 01, 2014 | Fiat UNO Cars & Trucks

3 Answers

How to put fiat pacer timing belt


Please I need to know how to replace Timing Belt on Fiat Uno Pacer 1400 and need to know how to set Timing. Is so difficult to answer my question

Oct 19, 2013 | 2006 Fiat 124

1 Answer

CAmbelt timing 0n 1400 Fiat UNO pACER 1995 MODEL


Whats the firing order on uno mia 1400 my kar wane start but keep failing I replaced the cambelt and drive belt and the module on the acnition also the roter now the firing remains the problem could you please send me an imige or video anything to explain the firing or what maybe might be the problem thanks

Feb 08, 2013 | 2006 Fiat 124

2 Answers

I have a Fiat uno Pacer 1400 sx, the car just cuts out while driving, i replaced the fuel pump, did not cut out but the fuel pump is leaking oil, what could be the problem now?


hi there i have uno pacer 1400 sx model. I drive my car a for a few km and then it cuts i cannot start it till it has cooled off. the swings but does not start. what can the problem be.

Mar 28, 2012 | Cars & Trucks

1 Answer

I have a 1400 uno pacer my headlights used to come on but now they only come on when i smack the fusebox a couple of tjmes is this a common fault on the uno?


I had the same problem u need to replace the fuse box it is maybe burnt out by now. switch off your lights during day time and only use it when you need to. I repaired mine and thats the advise i got from the guy who fixed it i never had that problem again

Mar 13, 2012 | 1994 Fiat Uno

1 Answer

I'm diving Uno Pacer, there is no spark from coil


Replacing module can assist a lot. I prefer changing spark plugs and cables in addition.

Jan 20, 2012 | 1994 Fiat Uno

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...