Question about Cars & Trucks

Open Question

Intake manifold diagram for '99 cummins 8.3 diesel engine

Where is the intake manifold pressure sensor located on a '99 8.3 cummins engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 160 Answers

SOURCE: RPM Oscillating

have you had the vehicle speed control reprogrammed if not that could be your problem

Posted on Nov 12, 2008

dustyboner
  • 331 Answers

SOURCE: 2001 Mitsubishi eclipse failed smog

2.4L
7ee7958.jpg

----------------------------------------------------------------------------------------------

3.0L

5d74b17.jpg

Posted on Dec 11, 2008

  • 840 Answers

SOURCE: Need serpentine belt diagram for Dodge Ram 3500 diesel truck

no you should be able to do it There should be a routing label on the underside of hood or on the radiator support/ Its should not be very hard if you have one already just loosen the Alternator it will slide down get the other one ready look to see the way its routed then slide the new one and tighten up the alternator thats it/ Please rate my response thank you very much

Posted on Jan 31, 2009

LT1Rob
  • 55 Answers

SOURCE: Torque Spec for '99 Chevy C1500 5.7L engine lower intake manifold

On 5.7L engines, install the bolts and torque in sequence as follows:

  1. Step 1: 71 inch lbs. (8 Nm).
  2. Step 2: 106 inch lbs. (12 Nm).
  3. Step 3: 11 ft. lbs. (15 Nm).
f2266b6.jpg

Posted on Mar 14, 2009

  • 42 Answers

SOURCE: 99 dodge cummins. Have a code of P0237 turbo boost sensor low v.

The Volvo S80 did not come with a cummins engine

Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Location of map sensor 99 intrepid 3.2L


The Intake Air Temperature/Manifold Absolute Pressure sensor is located on the left (driver's) side of the air intake plenum. I think pretty much anyone who has a license to operate a screwdriver can handle the job. It is fastened to the plenum with a single screw.

Disconnect the electrical connector, remove the screw, remove sensor, reverse procedure to install. It doesn't get any easier than that.

Labor time to complete the repair at the dealer is 0.2 hours (12 minutes).

It looks like the picture below.


5_15_2012_6_57_02_am.jpg

May 15, 2012 | 1999 Dodge Intrepid

1 Answer

Where is the map sensor located on a 2002 jeep grand cherokee


Check this Jeep information about your engines...
3.7L -The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold with 2 screws.
4.0L
- On the 4.0L six-cylinder engine the MAP sensor is mounted to the engine throttle body. On the 4.7L V-8 engine the MAP sensor is mounted to front of the intake manifold.
4.7L
- The MAP sensor is located on the front of the intake manifold. An O-ring seals the sensor to the intake manifold.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 10, 2012 | 2002 Jeep Grand Cherokee

2 Answers

Need to find and replace the DPFE-15 sensor. Dealership diagnosed when service engine light came on and saaid this is what needed replacing. Problem is I do not know where to find it on the engine.


Exhaust Gas Recirculation (EGR) System The exhaust gas recirculation (EGR) system is designed to:
  • reintroduce exhaust gas into the combustion cycle.
  • lower combustion temperatures.
  • reduce the formation of oxides or nitrogen (NOX).
The amount of exhaust gas reintroduced and the timing of the cycle varies by calibration. Timing and volume are controlled by the following:
  • engine rpm
  • engine vacuum
  • exhaust system back pressure
  • engine coolant temperature
  • air charge temperature
  • throttle position
The EGR valve (EGR valve) (9D475) is vacuum-actuated. The vacuum hose routing diagram is shown on the Vehicle Emission Control Information (VECI) decal. The EGR system is a differential pressure feedback EGR Sensor system. Differential pressure feedback EGR Sensor is a subsonic closed loop EGR system. The differential pressure feedback EGR system:
  • monitors EGR flow rate by the pressure drop across the metering orifice located in the EGR tube.
  • uses a differential pressure feedback EGR sensor as the feedback device.
  • uses the EGR valve only as a pressure regulator, rather than a flow metering device.
  • controlled pressure is varied by the valve movement using vacuum output of the EGR vacuum regulator solenoid (9J459).
  • allows for a more accurate assessment of EGR flow requirements.


Differential Pressure Feedback EGR Flow Diagram


aa3104a.gif

Differential Pressure Feedback EGR Sensor Removal
  1. Disconnect engine control sensor wiring (12A581) from Differential Pressure Feedback EGR Sensor.
  1. Disconnect Differential Pressure Feedback EGR Sensor hoses from EGR valve to exhaust manifold tube (9D477).
  1. Remove retaining nuts or bolts (depending upon application) and EGR Differential Pressure Feedback transducer.
Installation
  1. Follow removal procedure in reverse order.
  1. Tighten retaining nuts or bolts (depending upon application) to 5-7 Nm (45-61 lb-in).


    Differential Pressure Feedback EGR Sensor, 3.0L (2V) Engine


    aa0036a.gif



    Differential Pressure Feedback EGR Sensor, 3.0L (4V) Engine


    a23840a.gif


    Item Part Number Description 1 6049 RH Cylinder Head 2 - Differential Pressure Feedback EGR Sensor 3 - Nut (2 Req'd) 4 - Stud Bolt 5 - Bolt (2 Req'd) 6 - Differential Pressure Feedback EGR Sensor Bracket A - Tighten to 5-7 Nm (45-61 Lb-In) B - Tighten to 8-12 Nm (71-106 Lb-In)

    Engine Emission Control Component Location-3.4L SHO Engine


    a25013a.gif


    Item Part Number Description 1 95607-05200 Nut 2 - EGR Sensor Hose 3 - EGR Sensor Hose 4 95027-08016 Bolt 5 - Differential Pressure Feedback EGR Sensor 6 9J433 Differential Pressure Feedback EGR Sensor Mounting Bracket 7 9D474 EGR Solenoid Vacuum Valve (2 Req'd) 8 A4670 Vacuum Tube Assembly 9 9424 Intake Manifold 10 9J459 EGR Vacuum Regulator Solenoid A - Tighten to 5-7 Nm (45-61 Lb-In)
Hope this helps

Aug 14, 2011 | 1999 Ford Taurus

1 Answer

Where is the MAP sensor on 99 jeep grandcherokee 4.7 L 8 cylinder


On 4.7L the MAP sensor is located on the front of the intake manifold. An O-ring seals the sensor to the intake manifold.

zjlimited_1118.jpg
(click over image for zoom)

  1. Disconnect electrical connector at sensor.
  2. Clean area around MAP sensor.
  3. Remove 2 sensor mounting bolts.
  4. Remove MAP sensor from intake manifold.

Hope this helps.

Apr 27, 2011 | 1999 Jeep Grand Cherokee

2 Answers

I need to find the intake air temperture sensor in my dodge


depends on the engine...
3.7 liter, #1 below:

jturcotte_112.jpg

4.7 liter:

jturcotte_113.jpg

5.7 liter, #2 below:

jturcotte_114.jpg

Jan 01, 2011 | 2006 Dodge Ram 1500

1 Answer

Where is the IAT sensor for a 99 5.9 diesel ?


The two-wire Intake Manifold Air Temperature (IAT) sensor is installed in the intake manifold with the sensor element extending into the air stream:
  1. This is a Negative Thermal Coefficient (NTC), meaning that as the manifold air temperature increases, the resistance (voltage) in the sensor decreases, and vice-versa.
  2. The IAT sensor provides an input voltage to the PCM, indicating the density of the air entering the intake manifold based on intake manifold air temperature. When the ignition is turned ON , a 5-volt power circuit is supplied to the sensor from the PCM. The sensor is grounded at the PCM through a low-noise, sensor-return circuit.
  3. The PCM uses this input to determine:
    Injector pulse-width (air: fuel ratio) Ignition timing (to prevent spark knock)

3431fa4.jpg

Fig. IAT sensor installed in the intake manifold of a 5.2L engine. Others similar

Oct 04, 2010 | 1999 Dodge Ram

4 Answers

Where is knock sensor located on 2001 silverado 6000 engine


Under the intake manifold. Make sure you get the harness for the knock sensors. and clean out all of the rust and junk you're going to find donw in the holes before and after you replace the sensors.

Nov 01, 2009 | 2005 Chevrolet Silverado

1 Answer

Starting system wiring diagram for a 86 ford e550/100


Have you located your local Cummins Dealer for this. It should be no issue for them to copy/email a diagram. Good luck...

Jul 13, 2009 | 1986 Ford Econoline

1 Answer

Engine seems to be flooding with fuel


your engine doesn't have a MAP (Manifold absolute pressure) sensor it has a MAF (Mass Airflow) sensor, that is located in the air intake hose to the throttle body of the intake.

Jun 08, 2009 | 1988 Chevrolet Corvette

1 Answer

I am looking for the I.A.T. Sensor location on my truck


If your looking for the Intake Air Temp/Manifold Absolute Pressure sensor (IAT/MAP)(2003 model year and up) It is on the top of the intake manifold, just to the left of the #3 injector fuel line. There are 2 small Torx screws holding it.

Apr 05, 2009 | 2004 Dodge Ram 3500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...