Question about Cars & Trucks

Open Question

Ford laser fuel

I have a 3/95 KJ2 Laser 1.6l. Fuel pump not getting 12v to it. Does it have a fuel pump relay? If so, where can I locate it? Thanks in advance. Mick

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 170 Answers

SOURCE: fuel pump relay

It sounds like there is a short somewhere. One of the wires going to your relay is touching bare metal somewhere, causing it to overheat, but not enough to make it stop working.

Posted on Jul 05, 2008

  • 491 Answers

SOURCE: location of fuel pump relay in 1990 ford mustang

inside the engine compartment with the main fuses

Posted on Dec 21, 2008

  • 318 Answers


If you have put direct power to the fuel pump and it still wont work, then get an electrical test unit, test light, and ohmmeter, and check to see if there is a break in any of the wires, and that you have got a good ground connection from the ground feed.
After confirming you have good connections, then it will be obvious that the fuel pump needs replacing.

Posted on Jan 29, 2009

  • 491 Answers

SOURCE: 1988 ford f150 fuel pump relay location

inner driver side fender well along with the eec relay

Posted on Feb 02, 2009

  • 1 Answer

SOURCE: Location of fuel pump relay on a 2001 Ford Crown Vic

where is the fuel pump relay on a 2001 crown vic p71

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

85 mustang fuel pump not primeing

See if the oil pressure switch has 3 prongs. If so and it's leaking oil, that may be the problem. I can't recall what year they stopped doing that switch but my '89 had it. Aside from that, check the fuel pump relay. It can click and still not supply power to the pump.

Apr 02, 2014 | Ford Mustang Cars & Trucks

1 Answer

Location of the fuel pump reset and how to fix it?

There is no fuel pump "reset"(that's a Ford thing).You could have a bad relay,a broken wire or something else.The easiest place to diagnose is from the fuel pump relay socket.You can verify the high current 12v feed,the 12v ignition feed,the switched ground from the PCM,and ohms to ground to the pump from this single location. You will probably save time by trying another relay first(borrow the AC compressor relay from its socket-same part!).

Oct 07, 2012 | 1997 Buick LeSabre

1 Answer

Can't get power to the fuel pump

There is a relay/breaker for the pump in the relay center. It is located under the hood in a plastic cover. It will be labeled either next to the breaker or on the underside of the cover. There are three leads to the relay. one should have constant 12v, one should read 12v with the ignition in run or start, the other feeds the pump. If the inputs test correct, you need to replace the relay.

Aug 01, 2012 | Ford Cars & Trucks

1 Answer

No 12V to the fuel pump

For fuel related problem,the help links are provided below.
Click the link below to go through its procedure:----

How to relieve fuel pressure?
Refueling problem?
Car consuming more fuel?
How to maximize fuel economy on your vehicle?
Fuel pump relay troubleshooting ?
How to Increase gas mileage vehicle?
How to Test and Replace Fuel Injectors?
How to replace Fuel Tank Assembly?
Replacing Fuel Charging Assembly on Car?
How to replace Fuel Pressure Regulator ?
How to test Fuel Pressure and replace Fuel Pump?
Car will not take fuel into the fuel tank?
PGM-FI Main Relay location?
How to Relieve Fuel System Pressure on Car Models?
How to Replace a Fuel Injector
How to Replace a Fuel Pressure Regulator?
How to Replace a Fuel Pump?
How to change fuel injector on gmc ?
Time to replace Fuel pump?
Emergency fuel shut switch location?
How to jump fuel pump?
Car wont start when cold?
Car wont start after sitting overnight?
Car loses power while acceleration?
Fuel leaks from fuel pulsation dampener?
Car will not allow to put fuel?
Adding performance chip to increase Fuel mileage MPG?
How to test Electric fuel pump?
Fuel gauge drops to Empty?
Fuel pump not working on Ford?
Fuel pump has no power on ford diesel?
Pushing on the gas pedal but the car slows down? Gas pedal to the floor and the car slows down?

Ford Fuel pump Relay and fuse location diagram?

Ford inside fuse box diagram showing fuel pump relay?
Ford fuel pump fuse layout diagram?
How to lower fuel pressure on Toyota?

Fuel pump not running?
How to replace fuel filter on BMW?

This will help.

Feb 17, 2012 | 1990 Ford Econoline

1 Answer

Truck will not start,no fuel pump sound with key on,getting 4volts to each pump 7 volts at reset and 12 at relay,truck has spark w/starting fluid but no fuel supply

Needs 12v to run pumps. Bad grd at pumps?. or possible bad relay try by pass relay. also some were controlled by eng oil press switch off - on try by pass and check for proper voltage. You can also by pass all devices and power pumps by 12v.

Apr 28, 2011 | Ford F-250 Cars & Trucks

3 Answers

2001 ford focus code p1237 showin will not run how do i fix it

Hi hope I can help.
P1237 : fuel pump secondary circuit FD driver module.
What you need to do is check the voltage at the fuel pump.
Hook your meter to the fuel pump and have a helper turn on the key.
You should see voltage for 2 seconds , you can also hear the pump buzz when it turns on.
If you don't hear the pump turn on, but you have 12v at the pump your fuel pump has failed
If you don't get nether pump or voltage . then check your fuel pump relay.
Hope this helps Please leave feedback

Mar 04, 2011 | 2001 Ford Focus

1 Answer

No Power to Fuel pump

I would check the ground for the fuel pump relay that operates the switch side of the relay.
You should have 2 12v inputs to the relay. When the relay gets 12v input, it closes the relay switch on the heavy current side that sends 12v to the fuel pump.

A relay is needed because you don't want heavy current going through the switch.

Also, most cars only run the fuel pump for 2 seconds when the key is turned on because you don't want the fuel pump running without the car running. If you listen closely at the fuel tank, you should hear the pump run for 2 seconds when you turn the key to "ON"
When the key is turned to "START", the fuel pump should run continuously.
The engine computer tells the fuel pump to shut off if the engine rpms are zero.
So, I would check the switch side of the relay. Power amd ground.

Mar 01, 2009 | 1992 Jaguar XJ6

2 Answers

Fuel sistem

Look for the fuel pump relay and replace it.


Sep 21, 2008 | 1995 Suzuki Sidekick

1 Answer

Fuel pump works, but does not turn on when ignition is turned on. Car winds but will not start.

Check power to the fuel pump relay. You should have constant 12V on 2 places. And when the key is turned to crank, the PCM should ground the relay.

May 15, 2008 | 1993 Plymouth Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

13723 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides