Question about Cars & Trucks

Open Question

Shift indicator light on my toyota solara the s mode light wont come on

Posted by Anonymous on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 6982 Answers

SOURCE: beam lights out on 2000 toyota solara

check for voltage at the lamps themselves. If no voltage is present, check headlamp relay,.Rarely it could also be the multi-function switch, but don't go there first! Also, did you try a new bulb?(s)

Posted on Dec 13, 2008

  • 8 Answers

SOURCE: check engine light on my 1999 Toyota Solara

You need to have the codes read to see what caused it, Autozone will read the codes for free.

Posted on Aug 01, 2009

  • 1 Answer

SOURCE: Trac off indicator light is

why can't I get the trac light to go on when I start my car? It just says trac off. What can I do?

Posted on Jan 10, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the brake light relay on a 02 solara

That is brake light failure sensor light your seeing , no relay ! Probably the brake light switch .Go here free wiring diagram , check it out ,see if you can make sence of it .

Apr 15, 2016 | 2002 Toyota Camry Solara

1 Answer

Where is high beam fuse for Toyota solara

I have a 2007 Solara. The high beam indicator shows the high beams on but they are not. If there a high beam fuse? If so, what would it be labeled in the fuse box, I cannot find it

Jun 14, 2012 | 2008 Toyota Camry Solara

1 Answer

My girlfriend has a 1999 Toyota Solara, her headlights aren't working as well as some interior lights. I believe she has blown a fuse. She does not have the manual for the vehicle, so how can I get a...

The interior of the fuse box has the same diagrams as would have been on the vehicles manual or user guide. Once opening the fuse box, lookk in the cover for the diagram. Second, a blown fuse is observable within the circuitry. Third, the vehicle should indicate within the dashboard what condition is occuring. For example, the vehicle should display indication warning on requesting lighting inspection or alternate.

Jan 19, 2011 | 1999 Toyota Camry Solara

1 Answer

Trac off indicator light is on in my Toyota Solara 2003. What does this mean?

why can't I get the trac light to go on when I start my car? It just says trac off. What can I do?

Dec 17, 2010 | 2006 Toyota Solara

2 Answers

How do I reset the maintenance light on my 2004 toyota solara

The odo-button dance procedure to reset the light is listed in Page 122-123 of the US 2004 Toyota Prius Owner's Manual (Section 2-5 "Operation of Instruments and Controls: Gauges, Meters and Service Reminder Indicators", item (j) in the "Service reminder indicators and warning buzzers" section). It should be listed in a similar section in your Toyota Camry Solara's Owner's Manual.

Oct 01, 2010 | 2004 Toyota Camry Solara

1 Answer

New battery installed in 05 Solara, passenger door does not unlock when car put in park. How do I fix this?

When the battery is disconnected, the ADL mode returns to the default setting (Mode A). The following procedure must be used to set the ADL function to Mode B whenever the battery has been disconnected.

Initialization Procedure
Perform the following procedure to initialize the ADL function to Mode B.
1. Move the shift lever into the "P" position and close all doors. 2. Turn the ignition switch to the "ON" position. 3. Within 10 seconds after the ignition switch is turned to the "ON" position, push and hold the rear side (unlock position) of the door lock switch for 5 seconds. 4. All doors will automatically lock and unlock when you release the power door lock switch. ^ This indicates that the ADL function is set to Mode B. If all doors do not lock and unlock, the time the switch was held may have been too short or too long. Perform the procedure over again starting from step 1.

Sep 11, 2009 | 2005 Toyota Camry Solara

1 Answer

2000 Solara Shift Solenoid Malfunction

i can send you step by step instructions with diagrams if you post your email address

Jul 25, 2009 | Toyota Solara Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides