Question about 2007 BMW 320i E90
Hi, im having a serious problem whith my Bmw E90 320i Limousine 2007 (Europe version). My cluster is malfunctioning. When i turn on the car, my fuel and RPM gauges show the correct information but after 2 seconds they fall to mark 0, only works the speedometer and the lcd display with the warnings lights. I made the Cluster Test and it past the test perfectly. I have the BC Indicator Stalk broken and the exterior temperature sensor missing. Can those parts cause the cluster failed after 2 seconds after start? I reseted the car with a scanner Disconnected the negative connection from the battery Disconnected positive and negative connection from battery Checked all fuses and Relays Made a reset from the occults options of the Cluster Made a test from Test option of the cluster Disconnected the cluster and connect it again. Checked some grouds wires whithout good results
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: BMW E90 323I, ABS resetting.
hey hassa, if you swapped an ABS control unit from another vehicle, it needs to be coded to your vehicle. If your vehicle does not recognize the replacement vin, it will set a fault. also, make sure to have the ABS sensors calibrated after the control unit is coded. most dealers charge about 1hr labor to perform coding and sensor calibration.
Posted on Apr 05, 2009
Common problem on BMW's apparently...there are on-line repair services but they are NOT cheap...100-300 bucks. Tough to fix yourself...unles you are a highly skilled techie!
Posted on May 06, 2009
check wiring harness for fuse links usually under hood in engine compartment buy fuse/relay box also check relays for corrosion on sockets
Posted on Nov 24, 2009
SOURCE: Tyre Pressure light has appeared
it is done by selecting af the indicator stick, and choose reset, then drive for 50 meters/yards then the computet knows the turns af all the wheels and can find out if you get a flat ot poorly inflat4ed tyre.
no need for bmw service, it is also in your manual for the car. (i got one also)
Posted on May 04, 2012
Tips for a great answer:
Oct 06, 2016 | 2007 BMW 320i E90
Feb 14, 2016 | BMW 318i Cars & Trucks
Jul 02, 2012 | 2007 BMW 320i E90
Aug 26, 2011 | 1996 BMW 318
Jan 14, 2011 | BMW M3 Cars & Trucks
Jun 18, 2010 | 2007 BMW 525xi Sedan
Nov 01, 2009 | 2002 BMW Z3
Apr 26, 2009 | 2005 BMW 3 Series
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: