Question about 2000 Chevrolet Blazer
What are these codes ? po171 po 174
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 chevy aveo that the
P0128 - the thermostat may be stuck open or has anyone
put a colder thermostat in the car,because once it starts to get cold
it will throw a SES with a colder then stock thermostat. Replace the Thermostat should fix this problem.
PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has been removed from the PCM the vehicles main computer , and basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light. To get at the TCM codes requires in most cases the most up to date scanner software purchased after the cars model year and as of yet is still a little iffy. Standard OBD11 scanners will generally not be able to see these codes.
P1781 is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.
Replace the Thermostat and go to a transmission shop that can read the DTC codes with a scanner and reset the ECM for clear the codes. Most Transmission shop will do that free of charge, if not turn the Ignition key's to the on position and and pull the ECM fuse out for 30 seconds and then place it back in. Turn the ignition keys to the off position for 10 seconds and then start the car, the engine may stall but let it. Just start the engine again, the ECM is just relearning the engine and go for a test drive. This will clear all the DTC history in the ECM like the day it cam off the assembly line. Good luck and keep me posted, be glad to answer ay more question.
Posted on Oct 30, 2009
Hello , the abs code is prob just a maintainence light, prob is fine but GM likes to get you into the shop to have it periodicly checked out. If the abs brakes work and pulsate properly then its fine. The brake light may be a low fluid level in the master cyl reservoir . Clean the cap well and add fluid , the proper type and rating in needed. Fuel pressure sensoe may be due to a weaking fuel pump , weaking pressure regulator or dirty fuel filter. Thank you , Quinn
Posted on Mar 13, 2010
P0171 and P0174 Means engine is running lean-Possible a dirty mass air flow sensor (can be cleaned with brake clean) failing fuel pump, vacuum leak...
P0420 means your catalytic convertor is failing-time to see your exhaust shop
Posted on May 06, 2010
Tips for a great answer:
Feb 18, 2013 | 2003 Ford Expedition
Jul 15, 2011 | Lincoln Town Car Cars & Trucks
Jan 16, 2010 | 1998 Mercury Mountaineer
Jan 09, 2010 | 1997 Chevrolet C1500
Jan 05, 2010 | 2000 Chevrolet Blazer
Oct 19, 2009 | 1999 Ford Windstar
Nov 11, 2008 | 2000 Honda Passport
126 people viewed this question
Usually answered in minutes!