- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When an vehicle's air conditioning system has not been used for several months, the seals within the system start getting dry. I've never worked on a Peugeot 206 or any other peugeot before, that's why I had no idea where the low pressure ac port was. The high pressure ac port is the easiest to locate, because it is in the engine compartment, facing the car from the front, on left side of the radiator. The low pressure ac port is in the engine compartment, facing the car from the front, to the back in the center, under the windshield. The low pressure ac port and the high pressure ac port both have black dust caps. The low pressure ac port is the smaller of the two.
Look back on the firewall for the two a/c lines. One is large and on is much smaller. The larger line is the low pressure line. Follow that line back to the compressor. The low pressure port will be on that line.
You find the AC low pressure at the top of the compressor, orientated toward you , facing the front of the
vehicle. You can also follow the compressor line to reach the port.
The valve is covered a plastic cap covering it. Near the compressor you find two ports, the high port and low port.
To find out which one is the low port, run the air conditioner for a couple of minutes withthe engine on. Then turn off the care and touch the lines from compressor to the two ports covered with
plastic caps. Only one of the pipes will be cold, the cold line will lead you to the low port.
hello,good day,you have a 210 model with v 8 engine,your high pressure connection is located at front of your condenser,beside your ax.fan,then your low pressure connection is located at engine walling near your vacuum hose for brake booster,right side ,standing in front,ty
there are 2 ports one for low pressure and one for high pressure. the low pressure is bigger in diameter and is usually close to the dryer and or fender and firewall. the high pressure is near the condensor on the fron of the vehicle. if there are caps for the ports low will be blue and high will be red. low side pressure should be 35-50 psi and high pressure should be 135-150 psi