Question about Cars & Trucks

2 Answers

How do I remove ignition switch without a key? 1985 mercury marquis

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 21,873 Answers

With a drill I'm afraid.
You need the key to turn the lock cylinder to release the lock pin.
You can either drill out the pin or drill out the lock cylinder.

Posted on Jul 19, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 56 Answers

You need a steering wheel puller, take off the steering wheel, then you'll see it's obvious

Posted on Jul 19, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 grand Marquis will quit starting randomly without any cranking either. It will start if the car and steering wheel is shaken vigorously while turning the key. Why?


I would guess that one of the wires to the ignition switch or the switch itself is intermittent. Replacing ignition switch will likely fix it.

May 28, 2015 | 1999 Mercury Grand Marquis

1 Answer

Engine starts then dies after 2 to five minutes 85 mercury grand marquis have replaced distributor , ignition module , coil


Since you have replaced some of the ignition parts, have you checked fuel pressure and the fuel pump relay ?
Do you know what you are loosing when the engine dies ?

Aug 31, 2014 | 1985 Mercury Grand Marquis

1 Answer

I need to repair the linkage between the key lock and the ignition switch of a 1995 Mercury Grand Marquis. The key turns but does not move the switch.


I believe what your talking is called an accuating rod if not broken bend back into aliengment if you can if not get new one from dealer or junkyard

May 29, 2011 | 1995 Mercury Grand Marquis

1 Answer

My 2001 grand marquis is trying to start itself without my keys even in the ignition?


Solenoid switch,Open hood on drivers side fender you will see the battery cables go to fender semi round looking switch.If you have a screw driver Handel give it a smack or two it should stop you will need to replace this it will do it again!

Dec 22, 2010 | 2001 Mercury Grand Marquis

1 Answer

Ignition turns off immediately after turning. wont hold in run is there an easy fix or bypass? 1991 mercury marquis


They get real sloppy the ignition switches on most older fords.....unhook your battery then put the key in the run position and on the bottom of the steering column there is a small hole that is acceess to the release pin for that ignition swich ..you need a small screwdriver of lung thin punch to push that in and your ignition switch just comes our .
Go to the local wreckers or dealer and get a replacemen ........Keep in mind the key will be different from before so make sure the used one comes with a key

Aug 18, 2010 | 1991 Mercury Grand Marquis

2 Answers

Trying to remove key lock so plastic cover can be removed


When you look at the lock cylinder from the under side of it you will see a amall hole in it. You insert a pin or small flat head screw drive into that hole with the key in the run position and it will come out.

Oct 04, 2009 | 2000 Mercury Grand Marquis

1 Answer

1985 mercury grand marguis hace power but, will no start


If you have no circuit to the coil your problem is that you need a new ignition module.

Sep 25, 2009 | 1985 Mercury Grand Marquis

1 Answer

1985 Grand Marquis won't start


no..i also have an 85 gr. marquis with the 5.0 engine... i changed the starter solenoid located next to the battery on the passenger side firewall of the car.. if it clicks then its either the solenoid or the starter..those are hard to kill cars with good grounds..check the solenoid..

Dec 23, 2008 | 1985 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...