Question about Cars & Trucks
My digetal clusters went out and wont work i replaced them and they still wont work.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove the cluster. Buy or borrow a pencil type soldering iron and a magnifying glass. Check all the solder points and re-solder any which looks not smooth or damaged. Re-install cluster. If you buy an after market cluster you have to get a Chrysler dealer to re-program the computer to identify the cluster or the vehicle wont start. But if you repair your own there is no need for this re-programming step. I know I did it.
Posted on Jul 03, 2009
Same as 2 dr, or a stick.
There are bezel screws that hold the plastic trim (pointing up towards the windshield), you nee to remove these 2 screws. The bottom section is clipped in. Tilt the steering wheel down as far as it will go.
Once you have the bezel off, there are 4 screws holding the cluster to the dash. Remove them and gently pull the cluster forward. Reach around (expect to get scraped knuckles) and unclip the speedo cable, and two large multipin connectors. Don't force anything.
Getting the cluster out after this point is a test of your patience. It only seems to come out one particular way.
Posted on Aug 22, 2009
Tips for a great answer:
Jun 02, 2012 | Cars & Trucks
Aug 02, 2011 | 1992 Cadillac DeVille
Mar 07, 2011 | 1992 GMC Jimmy
Feb 12, 2011 | 1997 Cadillac DeVille
Mar 30, 2010 | 1992 Cadillac DeVille
Jun 08, 2009 | 1997 Cadillac DeVille
May 28, 2018 | Cars & Trucks
May 27, 2018 | Cars & Trucks
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: