Where is ignition failure sensor located on 2006 kia amanti

SOURCE: transmission filter in a Kia Amanti

you have to take the trransmission man off (drain the fluid first) and the rest you will be able to see how to do. i think there are 2 bolts that you have to remove to get the filter out

SOURCE: what oil does 2005 kia amanti use

Depends on where you live in the country.  In TN where I live most people just use 10W30 all year, but if you live in a colder area you would use 10W30 in the summer and 5W30 in the winter.  Hope this helps.  Thanks for an honest rating.

SOURCE: crank sensor location on 2006 kia optima

in the tank

SOURCE: knock sensor replacement

Turn ignition off. Disconnect knock sensor 3
-
pin harness connector. Locate knock sensor, on cyli
nder block.
On Optima 2.7L engine, sensors are located on both
sides of cylinder block. . Remove knock
sensor from cylinder block. To install, reverse rem
oval procedure.

SOURCE: Ignition failure sensor

there is such a part on the 2006 Optima...it is located under the plastic cover on the upper right side of the motor