Metal roofing and siding comes in sheets and is sold in linear ft.

Ad

You would need to know the width to calculate it.

Linear feet is length in a specific width.

Posted on Jul 18, 2013

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Yes, but the hard part is keeping it from it blowing away. The best way is to nail battens of wood across the lower edges, but not into the roof, or you will have more leaks. Put it right over the ridge or under flashing if no ridge.

Feb 24, 2018 | Cars & Trucks

Lineal feet are straight line feet.

You answered your own question.

25 feet.

Square feet are the surface area.

25 feet X 3 feet are 75 square feet.

You answered your own question.

25 feet.

Square feet are the surface area.

25 feet X 3 feet are 75 square feet.

Apr 18, 2017 | Cars & Trucks

You will be getting some of the things that are listed below in Z Purlins.

- C Section Purlins
- Eaves Beams
- Anti-Sag Bars
- Cleats (Weld on/Bolt on)
- Ties

Apr 05, 2017 | Cars & Trucks

19" . Linear is length.

Linear feet (often called Lineal feet) are the same as regular feet. No conversion is necessary. If something is 6 linear feet tall, it is 6 feet tall. It should be noted, that the correct term is Linear, since Lineal refers to a line of ancestry, not to length.

Applies to inches also.

Linear feet (often called Lineal feet) are the same as regular feet. No conversion is necessary. If something is 6 linear feet tall, it is 6 feet tall. It should be noted, that the correct term is Linear, since Lineal refers to a line of ancestry, not to length.

Applies to inches also.

Aug 30, 2015 | Cars & Trucks

Definitely yes, metal rooves have dozens of advantages ( like durability, environment friendly, stylish look, reliability, safety, etc. ). Here is the most detailed article about this type of rooves to make final decision METAL ROOF COST . Good luck!

Jul 22, 2015 | Cars & Trucks

140,we are not math instructors or tudors go to google for this stuff

Apr 17, 2015 | Cars & Trucks

no-- the sizes you have supplied come to 34.680 sq ft which is equal to .796 of an acre. roughly 3/4 of an acre

1 acre is equal to 43.560 sq ft.

1 acre is equal to 43.560 sq ft.

Feb 25, 2015 | Cars & Trucks

I have done tons of roofing and we always use square feet .length X width= sq ft .like 50 ft long by16 =800 then double to get both sides of roof is 1600 sq ft

Feb 12, 2015 | Cars & Trucks

Linear feet are a measure of length (no different from feet); square feet measure area. You cannot simply convert between measures of different kinds of quantities;the connection between them will be specific to a particular problem.A practical example in which this question can arise is in buying countertops for a kitchen. Some materials are sold by the square foot; others (basically those that are extruded, so they come in standard widths) are sold by the linear foot. In order to compare the two, you need to compute the area and wall length for the countertop you want.You can't convert between the two. All you have to do is to make the appropriate measurements so you can calculate the price of each item.The terms used in the lumber industry are a bit confusing.There are two terms that I think you might be mixing up.A LINEAR FOOT is simply the length of a board. If you want to know the area or volume of the board,you need additional information. For instance, 6 linear feet of 1-by-12 has an area of 6 square feet (12 inches = 1 foot, times 6 feet), and it's 1 inch thick, so the volume is 1/2 cubic foot (6 square feet times 1/12 foot). But 6 linear feet of a 1-by-6 board would have half the area and half the volume.A BOARD FOOT is equivalent to one square foot of a 1-inch-thick board. In other words, it is a square-foot-inch (ft^2-in), or 1/12 cubic foot.Linear feet are used for the pricing of a single size such as two-by-fours. Board feet are used for larger lumber that you are more likely to want to compare directly with different size boards .To sum up, neither a linear foot nor a board foot can be converted directly to square feet. A linear foot is a linear (length) measure, and a board foot is a volume measure. You need to know your particular board to do anything more, such as find the area.an example with an" L" shaped countertop will betwo rectangles are 24 by 80 inches and 24 by 36 inches. Thus the area is: 24 * 80 + 24 * 36 = 24 * (80 + 36) = 24 * 116= 2784 sq. in.To get it in square feet, divide by 144:

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

Apr 08, 2014 | Cars & Trucks

The windshield metal post from the roof to the bottom

of the door sill is called an A -pillar

That is what your door hinges are bolted to

The metal to your right as you enter the vehicle is

called the B-pillar

That is the one with the drivers door catch

The roof down to the door sill on the rear door of a car

or rear window downward is called a C-pillar

You may hear those terms if you watch a NASCAR race

The door sills are the metal sometimes covered with plastic

you swing your feet over to get in at the bottom between A & B

pillar

You may see rubber or some type covering just past the hinges

as you look into the front fenders

Inside next to the driver or passengers feet ,on the inside,

are what is called kick panels,inside sheet metal on A Pillars

of the door sill is called an A -pillar

That is what your door hinges are bolted to

The metal to your right as you enter the vehicle is

called the B-pillar

That is the one with the drivers door catch

The roof down to the door sill on the rear door of a car

or rear window downward is called a C-pillar

You may hear those terms if you watch a NASCAR race

The door sills are the metal sometimes covered with plastic

you swing your feet over to get in at the bottom between A & B

pillar

You may see rubber or some type covering just past the hinges

as you look into the front fenders

Inside next to the driver or passengers feet ,on the inside,

are what is called kick panels,inside sheet metal on A Pillars

Oct 02, 2012 | 2003 GMC Yukon XL

1,152 people viewed this question

Usually answered in minutes!

×