Question about Cars & Trucks

1 Answer

05 Tahoe - Wires cut

2005 Tahoe, Previous Police Service. Dealer cut accessory wires going from passenger side wiring block and removed the visible segment of wiring going from that power block that powers the windows and such, when decommissioning the vehicle. Where does the power block hidden behind a plastic panel on the passenger side connect to in the harness?

Posted by on


1 Answer

Go to Helm.Com and buy yourself the
factory wiring diagrams
No one can answer that
The professionals can't fix the easy things,
so that issue ,your on your own

Posted on Jul 18, 2013


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 22156 Answers

SOURCE: passenger side power window wiring harness

go to scrapyard and have a look on one in their??

Posted on Jan 01, 2009

  • 1861 Answers

SOURCE: 05 corolla oem power door locks and windows install

All of the power locks and power windows are directly ties into the "Integration Relay". This is the large white box behind the fuse panel under the dash. There are 2 different Integration relays, one with electric windows, and one without them. You may need to change the integration relay, also.

Posted on Feb 24, 2009

  • 3113 Answers

SOURCE: Removing passenger door panel

There is a screw behind the lock rod. Lift door panel straight up to remove

Posted on Jun 13, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 jeep wrangler blower not working on high

Sounds like the resistor block that controls your blower motor has started to go.this is a replace only to fix this problem.Go along to your local parts store and see if you can get a new one,if not its to the dealer.With the new part in hand go under the dash on the passenger side,and look for a loom of wires that will be close to the blower motor.The resistor block will be in the air box somewhere( for cooling purposes) and is usually held on with two screws. disconnect the wires first then remove the block.reverse for install.good luck

May 14, 2014 | 2003 Jeep Wrangler

2 Answers

2000 ford f250 passanger side window wont go up

Check the wires on the driver's door between the door and the post. A break in a wire will affect the passenger side.

Apr 04, 2012 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

2005 trailblazer, started truck this morning, windows were foggy, turned on defrost but the fan was not blowing, could feel a little air flow but was not blowing on any # cycle 1-5. What might be wrong

Hello: Go under the dash, passenger side. Remove under dash cover. Look straight ahead, you will see the blower motor with 2 wires. follow these wires to the blower motor model, on the module you will see a connector w/6 wires, these wires could be burnt, if so then the module may also be burned. You can get a repair harness at a GM dealer, You will have to splice it in. Make sure you line up the new connector wit the old so you get the wires in the proper order. If the module is burnt then you will have to replace it also. The blower motor is usually ok unless it is noisy or locked up. This is a common problem.

Jun 29, 2011 | 2005 Chevrolet TrailBlazer

3 Answers

My 2008 Chevy Equinox driver side window quit working, the motor is working, all other 3 windows are working, what could be the problem.

I have an 05 equinox had same problem with driver window,ended up finding broken wires in rubber boot between door and jamb,pieced out broken wires,problem solved....

Mar 20, 2011 | 2005 Chevrolet Equinox

4 Answers

Passenger side power sliding door stops part way

Had the same problem on ours. It stopped about 6 inches away from being closed. I could advance it and press the button, and it worked. About two weeks later it stopped working altogether. I had a black wire that was cut through. Trace the wires inside the black plastic wire mold track that looks like a tank tread. You might be able to see the cut. There are about 5-6 wires inside the track. Undo the wiring harness where the wire mold attaches to the sliding door gear. If you get a lighted 12vDC pencil tester (~$5), press the door button so it opens, and poke one of the wires in the wiring harness. If it lights, the connection is still fine. If it doesn't light work a little further back until the light comes back on, and some point in between is the cut. Using a flat head screwdriver, you can snap off the links of the wire track mold. They just snap back on with a firm grip.I resoldered the wires and some electrical tape.

I realized that when it was stopping part way the ends of the wires just happened to touch and allowed it to move, but when the door got so far the wire track had to bend separating the connection. The repair has been working for about 4-5months now.

Feb 18, 2010 | 2005 Chrysler Town & Country

1 Answer

2005 pontiac sunfire headlight issue

I have run into a few of these and what I found was water getting into the wires that go to these headlights.The harness is just below the battery area.It will be easier to get to from the bottom of the vehicle.You will have to remove the plastic cover from the harness and the electrical tape.Find the dark blue and the orange wires.The dark blue is for the drivers side and the orange is for the passengers side.There should be 2 of each.Look real closely and see if you see a spot where the wires are slightly swelled up.These wires are only 18 gauge so it is not easy finding the bad spot.One thing you can try is pulling on the wires a little and sometimes they will separate where the bad spot is.Hope this helps.Good luck.

Dec 16, 2009 | 2003 Pontiac Sunfire

2 Answers

Is a fuse blown? My passenger side door's electrical won't work.

Generally fuses control an entire system, in this case it sounds as if you have a wiring problem such as a plug has come undone that wires the door equipment. Check the wiring that goes to the door, follow it to your problem.

Sep 29, 2009 | 2003 Chevrolet Tahoe

3 Answers

2005 ford f150 electrical problems

i have a 05 ford f150 supercrew my power adjustable pedals didnt work my mirrors didnt work n the driver seat didnt work i found the problem i had a broken wire coming out of the #3 fuse block it it was orange with a green stripe it has some heat shrink on it i cut the heat shrink tape and the wire was badly corroded i replace the splice with 18 gauge wire and and everything came back on good as new

Mar 26, 2009 | 2005 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides