Question about Ford Cars & Trucks

1 Answer

Inertia cut off

Does anybody know for sure the location of the inertia cut off switch for this cad?

Posted by on


1 Answer

They are only on Ford Products & your 99.9%
sure there is nothing wrong there
You have to be in a bad accident to trip the
Fuel Safety Shut Off Sw
No idea why people even ask
What about checking fuel pressure at the motor
Turning on the key & listen for the pump to run
while next to the fuel tank
May want to read your question
There is nothing there,not even
a vehicle

Posted on Jul 18, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel cut off switch location

Sorry ,isn't one ! Ford is only domestic car maker that has a inertia fuel cut off switch ! Do you know what a relay is ? GM Fuel Pump Relay Testing .

Sep 02, 2016 | Buick LeSabre Cars & Trucks

2 Answers

1995 ford festiva inertia switch location

Karl, Ford installs inertia switches in most fuel-injected vehicles.
In passenger cars, the switch is typically located in the trunk and is identifiable by the red button on its top. Switch could be behind a trim panel/ piece/door. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
OEM Ford Lincoln Mercury fuel cut off inertia control module switch XS7T...
1993 Ford Festiva No power at fuel pump relay

Aug 12, 2016 | Ford Cars & Trucks

1 Answer

Fuel shut off switch for a 1995 Isuzu Rodeo

Isuzu Rodeo fuel cut off inertia switch Questions & Answers ... > ... > fuel cut off inertia switch > Cars & Trucks > Isuz
Isuzu Rodeo cars & trucks fuel cut off inertia switch questions and answers. Ask your Isuzu fuel cut off ... cut off inertia switch. Ad. Question about 1995 Rodeo.

Isuzu rodeo fuel cut off switch location - Fixya

Nov 26, 2015 | Isuzu Cars & Trucks

1 Answer

I have 2008 Sprinter 2500 (3.0 diesel) . it's been in an accident, after i fixed it, it won't start. Something doesn't let it do it. Does anybody know if I should reset the whole system at

the sensor keeping it from starting it is an inertia switch. it is a safety feature in case the vehicle rolls or is wrecked etc... it cuts the power to the fuel pump. generally it is located in the trunk of cars or in your case probably near the kick panel on the passenger side. usually has a button to pus to reset

Mar 08, 2013 | Cars & Trucks

1 Answer

Where is the inertia cut-off switch on 1983 nissan 720 PU

I'm not sure if there is a cut off switch for the 720. I was just reading recently about a common problem on them though, being the fuel pump control unit. If your pump isn't working, this may be your culprit. It is located on the passenger side kick panel. Pull the trim off, you should see it. Cost for them is about $60-$70. There may be a way to test them, I don't know.

Dec 26, 2012 | 1983 Nissan Pickup

1 Answer

Inertia switch

There usually are several. The airbags have inertia switches near them. The fuel pump relay may also have an inertia switch near by, to cut out fuel in an accident. Fords are in the trunk, but I don't know where it is on GM.

Nov 10, 2011 | 1995 Chevrolet Lumina Apv

1 Answer

After hydroplaning into a ditch My Bronco will not start....have a new motor and Transmission...acts as if starved for fuel

The problem could be that the air filter has become wet, or water has entered an electrical control device in the engine compartment, or a wire connector or a bulk-head connector might have become loose or dis-connected, the fuse to the ECM or fuel pump might have blown out, or the fuel shut-off inertia switch has been tripped.

Check the fuse to the fuel pump and the fuel shut-off or "inertia" switch, usually located behind the passenger side kick panel, or it will sometimes be located under the carpet just under the heater assembly, and check the red reset button on the top to see if it has been tripped, and push the red button all the way down to see if it will reset. Here is an image of the inertia switch or fuel cut-off switch, and a diagram that shows the location of the fuel cut-off switch under the passenger side carpet to help assist you, and let me know if you require any further assistance.



Aug 08, 2010 | 1990 Ford Bronco

2 Answers

1998 olds silhouette fuel cut off switch location

not sure what you are looking for?? there is no fuel cut oof switch in these vans. Not factory anyway. if you could elaborate on what you are looking for and or why.

Apr 29, 2009 | 1998 Oldsmobile Silhouette

1 Answer

Where is inertia switch for 2005 hyundai sonata?

Inertia switch is located in one of two areas, on the passenger side panels next to the toe kick by the radio. Or up under the dash. It will be a red button that you need to puch in

Feb 09, 2009 | 2000 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides