Question about Audi A3
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
that is your traction control. Either you pressed the traction control button it say ASR OR ESP on your console in the center next to the hazard switch.
Posted on Sep 10, 2008
It means you have a computerized system management problem. An electronic sensor component has either failed, or a condition has occurred that has put a sensor out of normal range and the onboard computer is letting you know of it. Any time that light comes on it sets a code that can be read with a special code reader.Most auto parts stores will retrieve the code/ codes for you at no cost. Be very cautious interpreting the codes meaning, because various engine conditions will set a code as well, because the condition will affect what the sensor measures. If you spend the money for the replacement sensor(never cheap) it won't shut the light off.Once installed auto parts stores will not take it back.Also 90 percent of the time it is defective wiring running to the sensor or bad grounding that causes the codes/codes.So unless you have a ton of high priced testing equipment and a lot of electronic engine control troubleshooting experience,you best take in in for service. One more thing. The most common reason the light comes on is a loose or defective gas cap.The computer monitors that too.
Posted on Nov 30, 2008
SOURCE: SEAT TOLEDO WARNING LIGHTS
Could be the motor-management-warning light, but I guess it's the break-warning light. There might be too little breaking-fluid left in the lines ... A boardcomputer-readout should clarify this.
Otherwise, try parking on an ascending road with the nose pointing up, hit the hand-break and wait like 2 minutes; the light should come on. You might wanna retry it with the car's nose pointing downwards as well ... If so, definitely the breaking-fluid, otherwise probably not ;)
In any case - flashing warning light are never ok, so when you see it again and you're sure it's not just the ABS/ESP warning light, go and have your boardcomputer read-out, since it should contain useful errorcodes ..
Posted on Feb 07, 2009
SOURCE: warning light on audi a4
This is the indicator for ESP (stability control). If you look on your dash, you'll see a button with, you guessed it, ESP written on it. This allows you to turn your stability control on and off. If your light is on constantly, try pushing the ESP button. If it flashes on and off (ie during hard driving) this simply means it is working.
Posted on May 28, 2009
Testimonial: "thanks, "
Tips for a great answer:
May 09, 2016 | Cars & Trucks
Feb 03, 2016 | Cars & Trucks
Sep 25, 2015 | 1992 Volvo 740
Apr 26, 2014 | 2008 BMW 335i Cabriolet
Parking lights, tail lights and dash lights
How to replace Instrument panel and dashboard?
Tail lights and dash light fuse keeps blowing?
This will help.
Feb 19, 2012 | 1992 Buick Century
Jul 17, 2010 | 2002 Volkswagen Jetta TDI
Jun 19, 2010 | 2004 Volkswagen Golf
Feb 06, 2009 | 1996 Toyota RAV4
Jan 21, 2009 | 2000 Volvo S40
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: