Question about 2006 Ford Fusion

Open Question

Orifice tube located

Need to change my orifice tube but not sure where it is

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: 97 ford windstar 3.8

oriface is a pipe like structure in which pressure of the liquid is increased

Posted on May 31, 2008

  • 23 Answers

SOURCE: location of orifice tube in 2004 ford taurus

orfice should be located on the accumulator, where the large line connects.

Posted on Oct 03, 2008

  • 93 Answers

SOURCE: Where, exactly, is the orifice tube located on my truck?

the orfice tube is locate in the line between condenser and evaporator. near the spring lock coupling. you must unbolt the cruise servo and overflow bottle, reposition them out of way and you will see the line connection..the orfice is inside line near that uniion. the ac system must be evacuated prior to removal, and recharged afterwards..

Posted on Jun 04, 2009

roniecon
  • 6826 Answers

SOURCE: Orifice tube 1998 mustang

did you find the location? Let me know one way or another so if I can help anymore ,I will

Posted on Jun 04, 2010

Testimonial: "Yeah it was actually a lot easier to change than I thought it would be. Now my compressor while recharging it isn't kicking on. Is there a way to get it going again or am I doomed to have to get a new one of those too? lol thanks"

kirkx
  • 2019 Answers

SOURCE: loacation of the orifice tube

The AC evaporator orifice always has to be after the electronic freon release valve after the receiver/dryer, and the evaporator itself.
It is optimal for it to be as close to the evaporator as possible, so sometimes it is even part of the input for the evaporator.
However, it is best if it is separate, because the orifice often gets clogged.
But the most common cause of clogging is ice, so try a vacuum pump to desiccate any moisture out first.
If the clog is ice, you can tell by heating the orifice and melting the ice.
Careful not to get it too hot though.
You don't want to damage hoses, and if freon gets into a flame, it can be toxic.

Posted on Jul 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LOCATION OF ORIFICE TUBE ON A 96 MERCURY VILLAGER 3.3L


The orifice is located in the small tube going in the firewall on the passenger side of the vehicle. You will need a special tool to unlock the tube to get to the orifice. Good idea to wear safety glasses when working on air conditioners. Good luck.

Aug 01, 2016 | Mercury Villager Cars & Trucks

2 Answers

Where is orifice tube on 1994 gmc 1500 p/u


It is located in the larger of the 2 AC hoses from the compressor or it is located on the can shaped object called the "accumulator canister"

Jun 03, 2016 | GMC Cars & Trucks

1 Answer

Where is the A/C orifice located 1993 Sonoma 4.3 TBI


Terry,I think its in the evaporator, some times in one of the condenser lines, Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

ORIFICE TUBE LOCATION please help

How to properly install an Orifice Tube

AC Drier and Orifice Tube

Sonoma Orifice Tube Best Orifice Tube Parts for GMC Sonoma

Mar 14, 2016 | Cars & Trucks

1 Answer

Location of orifice tube in 2000 chevy venture


best advice is the method i would use to located the orifice tube in the 2000 chevy venture. check the automotive repair book section in your local library. Most libraries have repair manuals on their automotive shelf section. find the a/c manual for your year and model car. make a copy of the page that has the information you need. you will need to make a copy because the library will not let those manuals be checked out. you might want to google for the location of the orifice tube location. I hope this helps.

Jun 18, 2014 | 2000 Chevrolet Venture

1 Answer

Where is the orifice tube located to put a new one in?


The orifice tube is located inside the liquid line where it connects to the condenser. This line is located on the passenger side of the car and has the low side charge port on it. this line unscrews right where the orifice tube is located... Hope this helps

Sep 08, 2012 | 1992 Buick LeSabre

1 Answer

What is the purpose, and what is the proper location of the orifice tube in the air conditioning system on my 1991 chevy silverado?


The orifice tube restricts the flow of refrigerant to the evaporator. This restriction allows high pressure liquid freon to change into low pressure freon before entering the evaporator. The orifice tube is located inside the hose running between the condenser and the evaporator. You'll need an orifice tube removal kit if you are looking to remove it.

Aug 23, 2010 | 1991 Chevrolet Silverado 2500

2 Answers

Need the location of the orifice tube for the a/c unit.


Look under the dryer,there is a small liquid line going into the firewall,it is in there,right at the connection,there is a swelled portion of the line,use needle nose pliers to remove the orifice tube,and to install it,if this was at all helpful,please rate,thank you.

Jul 02, 2010 | 1992 Oldsmobile Ninety Eight Regency

1 Answer

Need to find location of orifice tube on my 1998 Mercury Mountaineer. I have the replacement orifice tube, and I am fairly sure of the location. If it is where I think, within the ''S'' shaped part of the...


the orifice tube always goes in the high side , the thinner line, most of the times close to the evaporator...an easy way to find it is touch with your fingers the line ,in some place will be hot and in another cool , when it change from hot to cool there is the place, most of the time is close to the line connection , hope this help

Aug 02, 2009 | 1998 Mercury Mountaineer

1 Answer

Where exactly is the orifice tube located at on a 1996 (DOHC v6)?


it's in the high pressure liquid line.

A/C Evaporator Core Orifice The A/C evaporator core orifice (19D990) should be replaced whenever the A/C compressor (19703) is replaced for lack of performance (internal damage). The A/C evaporator core orifice, located in the condenser to evaporator tube (19835), cannot be serviced in detail as a component of the line. If replacement is necessary, follow the procedure outlined for Liquid Line Removal and Installation. An orifice tube replacement service kit may be used as an optional service procedure. Refer to Section 12-00 for information regarding the use of an A/C Evaporator Core Orifice Replacement Kit E5VY-19D695-A.
-----------------------------------------------------------------------------------
A/C Evaporator Core Orifice Replacement Kit Installation
  1. Discharge A/C refrigerant system. Refer to System Discharging and Recovery as outlined.
  1. Remove condenser to evaporator tube (19835) from vehicle.
  1. Locate A/C evaporator core orifice (19D990) by three indentations or a circular recess in metal portion of the condenser to evaporator tube.


    A/C Evaporator Core Orifice Location
32c58e1.gif
  1. Note angular position of ends of condenser to evaporator tube so that it can be reassembled in correct position.
  1. Cut a 63.5 mm (2.5 inch) section from condenser to evaporator tube at A/C evaporator core orifice location. Do not cut closer than 25.4 mm (1 inch) from start of a bend in tube.


    A/C Evaporator Core Orifice Section Removed From the Liquid Line
    ea95a2d.gif
  1. Remove contaminants from the two pieces of the condenser to evaporator tube.
  1. NOTE: The inlet half of the condenser to evaporator tube will be positioned against the A/C evaporator core orifice tabs when correctly assembled.

    Lubricate fitting with clean refrigerant oil and assemble orifice tube kit (with A/C evaporator core orifice installed) to condenser to evaporator tube. Make sure flow direction arrow is pointing toward evaporator end of the condenser to evaporator tube, and taper of each compressor ring is toward compression nut.


    A/C Evaporator Core Orifice Kit Disassembled Components
    4280629.gif

Jun 05, 2009 | 1996 Mercury Sable

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...