Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.
Posted on Jan 25, 2009
Fuses & RelaysThe fuse box is located under the engine hood on the left side, near the upper strut housing or near the battery.
Various relays are also mounted on the fuse box for easy accessibility.
The flashers are located behind the bottom center of the lower instrument trim panel.
- BMW E36 Fuse Box Relay Layout
- 325ci Owners Manual
Posted on Oct 23, 2009
If you go to the auto parts store they should have a fuel line disconnect tool that has a 5/16ths end an a 3/8ths end. The tool is shaped like an X. Before you start you need to pull the fuel pump fuse under the front of the REAR passenger side seat while the car is running and let it stall. it will release the built up pressure. This is important unless you want gas to spray every where. Then take the tool and start with the end of the filter with two lines. Place the appropriate end of the tool over the smallest inlet, push the tool in then pull the line towards the filter and then push the line away and it should disconnect. Do the same with line above. Then you can use the two appropriate size wrenches to disconnect the outlet end. reconnecting the new filter is simple just make sure your quick connect lines click in all the way and you tighten the outlet line well, I think its like 22 or 25 ft/lbs.
Posted on Dec 15, 2009
I can't get my brake lights to work. the rear one in the window works but the tail ones won't work.do you have any ideas as of what to try to fix this problem. Thanks!
Posted on Jul 03, 2010
Tips for a great answer:
Oct 14, 2016 | 2004 Cadillac SRX
Nov 26, 2013 | 2004 Cadillac Escalade
Feb 07, 2013 | 2004 Cadillac SRX
Turn signal tail lights and BRAKE LIGHTS NOT WORKING
can be faulty brake light switch causing the problem or its blown brake light bulb.
First check and confirm brake light lamp is working and that's not
For turn signal not working it can be faulty turn signal switch or its issue with wiring:----
trouble shoot brake and turn signal related problem, check the help links mentioned
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html
Brake lights not working on 1989 BUICK REGAL?
How to replace Brake light switch on Chevrolet Tahoe?
How to replace Parking, turn, and Brake Lights on car?
Upper brake lights work, but low brake light not working?
1997 Cadillac Catera: How to replace Brake Light Switch?
2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html
Car Tail Lights Not Working?
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html
Right turn signal not working on Pontiac Car?
Only one side indicator light working on car?
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html
1996 Chrysler LHS brake light circuit wiring diagram?
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html
One brake light on driver side not working, but other lights work?
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?
Overhead Brake lights not working on 1999 GMC Sierra 4x4?
2004 Ford Mustang: Brake light Fuse Location?
Nov 24, 2012 | Cars & Trucks
Oct 18, 2012 | 2006 Cadillac SRX
Jun 29, 2012 | Cadillac Escalade EXT Cars & Trucks
Dec 03, 2011 | 2004 Cadillac XLR
Jan 08, 2011 | 1998 Cadillac Eldorado
Nov 30, 2009 | 2004 Cadillac SRX
Feb 23, 2009 | 2004 Cadillac SRX
214 people viewed this question
Usually answered in minutes!