Question about Cars & Trucks

Open Question

Elecman voltage regulator installation wiring diagram

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 30 Answers

SOURCE: wiring diagram for body mount voltage regulator

http://www.ncttora.com/fsm/1993/index.html

Posted on Aug 08, 2009

Ad
  • 6982 Answers

SOURCE: wire diagram 70 monte carlo

On regulator, top down:brown, orange, white, dark blue.
Top down again: field on alt...,"r" on alt,... to battery,... to resistor that goes to acc side of ign switch, and through dash light to run side of switch (Same wire splits on it's way there) different if transistor regulator or if regulator is in the alt.

Posted on Sep 06, 2009

co7196
  • 3433 Answers

SOURCE: I have a 1974 vw beetle. I got a worldwide

Alternators don't have external regulators. If you need a regulator, You need a better brand alternator Good Luck,Ned

Posted on Sep 13, 2009

alicantecoli
  • 22219 Answers

SOURCE: need wiring diagram for voltage

manual voltage regulator or electronic ,either way its simple ,one wire from battery or ignition switch runs to regulator for the sensing then one from the alternator and another to earth .if stuck i have a 40yr old lucas manual in the shed ,or just fit a all in one alternator on ,not difficult

Posted on Dec 31, 2010

  • 148 Answers

SOURCE: how to connect a new

knowing the color codes can be a great help..usually in 12v reg system,from the regulator there are 6 white wire having a stripe codes,blue means neutral,green means field,black means ground to body,white means hot wired to +12v,yellow means to bat charging indicator going to instrument panel and finally red means to ignition....and always secure the regulators case to ground.

Posted on Jul 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Voltage regulator wiring diagram


Free wiring diagrams and Technical Service Bulletins, just have to agree to license agreement, and put in car information. Wiring diagrams are under "technical information".
http://www.bbbind.com/products.html

Nov 15, 2013 | Isuzu Cars & Trucks

1 Answer

Need to know how to wire koler command voltage regulator


We do not have this wiring diagram. Sorry.

May 14, 2013 | Cars & Trucks

1 Answer

Ive got a 1988 ford ranger,it strated to stall not run popped when tried to apply fuel,went bought fuel filter pump,install samething,pull voltage regulator plug truck runs fine, so go buy new alt with...


Interesting.
You may need a wiring diagram for the engine.
Unplugging the regulator turns off the alternator which should not affect the ignition system. Unless it is over charging somehow. Or the alternator load on the engine is causing a missfire to be worse.
Its possible you have a ground problem somewhere too.

Jun 29, 2012 | 1988 Ford Ranger

1 Answer

I have a 93 jeep grand cherokee changed altenator but still wont charge


If no damaged wiring is found, it's most likely an internal fault in the ECM (Engine control module, computer, PCM, ECU, whatever you want to call it, it goes by many names)
The Voltage Regulator is built into the ECM on virtually every Chrysler product (including Jeeps) after 1987 or so. And it is prone to failure. If it does fail, you either have to replace the ECM or install an External Chrysler Voltage Regulator, which requires some wiring harness modifications and a few parts that can be purchased at your favorite auto parts store.
To do the External conversion, you'll need :
1 Chrysler Voltage Regulator (virtually any Dodge/Plymouth from 1970 - 1986. It's best to order one for a 70's 4x4 Truck with a 318 engine though, to avoid any possible mix ups)
1 Chrysler Voltage Regulator Pigtail (this is the plug that connects to the regulator)
Roughly 10 feet of 14 gauge wire, possibly less, depending on where you want to mount the regulator.
Most, if not all Regulators now include a wiring diagram in the box, for this purpose, just follow the diagram and match up the field wires on the alternator with the ones in the diagram. On a '93 Jeep one field wire should be Blue, the other should be Green.

Aug 23, 2011 | Jeep Grand Cherokee Cars & Trucks

2 Answers

How to connect a new era alternator voltage regulator wiring diagram.Or a schematic diagram of the charging system.


knowing the color codes can be a great help..usually in 12v reg system,from the regulator there are 6 white wire having a stripe codes,blue means neutral,green means field,black means ground to body,white means hot wired to +12v,yellow means to bat charging indicator going to instrument panel and finally red means to ignition....and always secure the regulators case to ground.

Jul 19, 2011 | Isuzu i-Series Cars & Trucks

1 Answer

Need wiring diagram for voltage regulator 71 beetle


manual voltage regulator or electronic ,either way its simple ,one wire from battery or ignition switch runs to regulator for the sensing then one from the alternator and another to earth .if stuck i have a 40yr old lucas manual in the shed ,or just fit a all in one alternator on ,not difficult

Dec 31, 2010 | Volkswagen Beetle Cars & Trucks

3 Answers

Where is the voltge regulator on a 1989 lincoln town car


VOLTAGE REGULATOR IS LOCATED BEHIND BATTERY.YOU PROBABLY MIGHT HAVE TO REMOVE BATTERY TO REMOVE THE VOLTAGE REGULATOR.

May 16, 2010 | 1989 Lincoln Town Car

1 Answer

I need a printable diagram for replacing an altenater on a 1994 ford mini-van. Does anyone know a website to find one for free?


Removal
  1. Disconnect battery ground cable (14301) .
  1. Remove snow/ice shield.
  1. Remove engine air cleaner intake tube (9A624) .
  1. Disconnect the generator voltage regulator wiring (14305) to the voltage regulator.
  1. Remove wiring connector bracket.
  1. Loosen the drive belt tensioner (6B209) and remove the drive belt .
  1. Remove the bolts holding the voltage regulator to the generator bracket (10A313) .
  1. Remove the voltage regulator from the generator bracket .
Installation
  1. Position the voltage regulator on the generator bracket .
  1. Install the bolts and tighten to 40-55 Nm (30-40 ft-lb).
  1. Install the drive belt over the generator pulley .
  1. Adjust the drive belt tensioner as outlined in Section 03-05 .
  1. Connect generator voltage regulator wiring to the voltage regulator. Tighten generator Battery Positive Voltage (B+) wire attaching nut to 9-12 Nm (6.5-9 ft-lb).
  1. Install wiring connector bracket.
  1. Install engine air cleaner intake tube .
  1. Install snow/ice shield. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) (12A650) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more for powertrain control module to relearn the strategy.
  1. Connect battery ground cable .

Jul 28, 2009 | Ford Aerostar Cars & Trucks

2 Answers

Car Voltage Regulator Connection


Hi
The only thing that I need is the diagram on how to connect a voltage regulator (12 V), car unit
on my wind generator motor which my produce more than 12 V, according to the wind speed.

Sincerely

Nestor

Sep 24, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...