Question about Cars & Trucks

Open Question

2007 chevy colorado P2444 code how to fix

How do I fix the codes P2431 and p2444

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 285 Answers

SOURCE: what does p2444 code mean on a 2008 chev colorado

it means the secondary air injection system pump is stuck on,could be a bad relay keeping the pump on,hope this helps

Posted on Oct 15, 2009

Testimonial: "thank you very much and the speed inwith you did it in"

SOURCE: i keep getting troubleshooting code P0411, P2431 & P2444

vag diagnostic tool

Posted on Apr 17, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm getting engine codes that I can't seem to find out what they mean. P0000 and P2444


P0000 don't know p2444 secondary air injection system pump stuck on bank 1

Apr 11, 2015 | 2009 GMC Canyon

1 Answer

2010 impala dtc p2444


Has to be C244C through F to be valid.

Mar 26, 2014 | 2010 Chevrolet Impala

1 Answer

What are the probable causes of DTC P2444?


Hello Please read this carefully. This info directly relates to the code you are having. I will include a troubleshooting tree at the bottom. If there are any other codes or if you need further info please let me know:

SYSTEM DESCRIPTION The secondary air injection (AIR) system aids in the reduction of hydrocarbon emissions during a cold start. The system forces fresh filtered air into the exhaust stream in order to accelerate the catalyst operation. An electric air pump, the AIR pump, provides filtered air on demand to the AIR control solenoid valve/pressure sensor assembly. The AIR control solenoid valve/pressure sensor assembly controls the flow of air from the AIR pump to the exhaust manifold. The AIR valve relay supplies the current needed to operate the AIR control solenoid valve/pressure sensor assembly. A pressure sensor is used to monitor the air flow from the AIR pump. The powertrain control module (PCM) supplies the internal pressure sensor with a 5-volt reference, an electrical ground, and a signal circuit.

The AIR diagnostic uses 3 phases to test the AIR system:
  • DTCs P0411 and P2430 run during Phase 1
  • DTCs P2430 and P2440 run during Phase 2
  • DTC P2444 runs during Phase 3
In all 3 phases, testing is accomplished by comparing the measured pressure against the expected pressure. The PCM can detect faults in the AIR pump, AIR control solenoid valve/pressure sensor assembly, and the exhaust check valve. The pressure sensor can also detect leaks and restrictions in the secondary AIR system plumbing.

The DTC P2444 Secondary Air Injection (AIR) Pump is Stuck ON diagnostic monitors the system pressure signal during test phase 3. When the PCM determines the AIR pressure sensor signal is higher than expected, DTC P2444 sets.

DTC DESCRIPTOR
This diagnostic supports the following DTC:
  • DTC P2444 Secondary Air Injection (AIR) System Pump Stuck On
CONDITIONS FOR RUNNING THE DTC
  • DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0350, P0411, P0412, P0418, P0420, P0606, P0641, P0651, P1350, P2430, P2431, P2432, P2433, P2440 are not set.
  • The system voltage is between 10-18 volts .
  • The engine is running.
  • The start-up engine coolant temperature (ECT) parameter is between 5-50°C (41-122°F) .
  • The start-up intake air temperature (IAT) parameter is between 5-60°C (41-140°F) .
  • The BARO parameter is more than 60 kPa .
  • The MAF sensor parameter is between 3-24 g/s .
  • DTC P2444 runs once per trip start-up when the above conditions are met and the AIR pump operation is requested.
CONDITIONS FOR SETTING THE DTC
The measured AIR pressure is more than expected during AIR pump Phase 3 operation. DTC P2444 sets within 5 seconds when the above conditions are met.

ACTION TAKEN WHEN THE DTC SETS
  • The PCM illuminates the malfunction indicator lamp (MIL) during the first key cycle in which the diagnostic trouble code (DTC) sets.
  • The PCM records the operating conditions at the time the diagnostic fails. This information is stored in the Freeze Frame buffer.
CONDITIONS FOR CLEARING THE MIL/DTC
  • The PCM turns OFF the MIL on the third consecutive trip cycle during which the diagnostic has been run and the fault condition is no longer present.
  • A DTC will clear after 40 consecutive warm-up cycles have occurred without a fault.
  • A DTC can be cleared by using the scan tool Clear Information function.
DIAGNOSTIC AIDS

Inspect for any of the following conditions:
  • The resistance of the AIR pump relay coil (across terminal 85 and terminal 86) is 50-70 ohms at 20°C (68°F) . In the normal unenergized state, the resistance of the open relay contacts (across terminal 30 and terminal 87) is infinite.
  • The AIR pump relays electrical contacts may be pitted and sticking. Replace the relay if tapping gently on the relay or wiggling the relay causes a change in the relays operation.
  • The performance of the AIR pump relay may be affected by temperature. Check the relay after sitting outside overnight and after running the engine 30 minutes .
  • An intermittent malfunction may be caused by a fault in an AIR system electrical circuit. Inspect the wiring harness and components for an intermittent condition.


21812371-jq13pypi3egybe0aho3o0ljx-4-0.gif

The numbers below refer to the step numbers on the diagnostic table.
  1. This step tests for the correct operation of the AIR pump. When the AIR pump relay is commanded ON with the scan tool, only the AIR pump relay is energized. When the AIR valve relay is commanded ON with the scan tool, both the AIR pump and the AIR valve relays are energized.
  2. This step tests for the correct operation of the AIR pump relay.

Nov 27, 2013 | 2005 Buick LaCrosse

1 Answer

P2444 diagnostic code, what does it mean?


secondary air pump, check pipes for any splits

Nov 27, 2013 | 2005 Buick LaCrosse

1 Answer

2008 Colorado , Code: P2431


If you have no factory service manuals, you have to
google all codes- for any vehicle


Chevy Colorado OBD P2431

Sep 12, 2013 | Cars & Trucks

1 Answer

2007 chevy colorado DTC code P2610


BEFORE ANY THING. CK YOUR CABLES TO THE PCM. TAKE THEM OUT AND PUT THEM BACK IN. ALSO, MAKE SURE MASS AIR FLOW CONNECTIONS ARE TIGHT.

Jan 11, 2012 | Chevrolet Chevy Cars & Trucks

1 Answer

How to fix P2430 code on a 2006 Pontiac Grand Prix


P2430 Secondary Air Injection System Air Flow/Pressure Sensor Circuit,
The AIR diagnostic uses 3 phases to test the AIR system:

DTCs P0411 and P2430 run during Phase 1
DTCs P2430 and P2440 run during Phase 2
DTC P2444 runs during Phase 3
During phase 2, only the AIR pump is activated. The solenoid valve is closed, this is p2430 and p2440. -The AIR system pressure sensor is stuck. good-day !!

Jul 15, 2011 | 2006 Pontiac Grand Prix

1 Answer

What does p2444 code mean on a 2008 chev colorado with a 2.9 eng.


it means the secondary air injection system pump is stuck on,could be a bad relay keeping the pump on,hope this helps

Oct 15, 2009 | 2008 Chevrolet Colorado 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...